The Experts below are selected from a list of 360 Experts worldwide ranked by ideXlab platform

Ahmed J Mohammed - One of the best experts on this subject based on the ideXlab platform.

  • optimization of solar photocatalytic degradation of Chloroxylenol using tio2 er3 tio2 and ni2 tio2 via the taguchi orthogonal array technique
    2016
    Co-Authors: Ahmed J Mohammed, Abdul Amir H Kadhum, Muneer M Baabbad, Ahmed A Alamiery
    Abstract:

    In this study, the optical properties of a TiO2 photocatalyst were enhanced with various impregnations of Er3+ and Ni2+ separately, using the impregnation method as photocatalysts for the direct solar photolysis degradation of Chloroxylenol. The synthesized Er3+/TiO2 and Ni2+/TiO2 catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), metal mapping, and ultraviolet visible (UV–Vis) spectroscopy. The results showed that the Er3+/TiO2 and Ni2+/TiO2 nano-particles have the same structures of TiO2 nano-particles with little difference in particle size. The Er3+ and Ni2+ ions were well-distributed on the TiO2 surface, and it was found that the maximum band gap decreased from 3.13 eV for intrinsic TiO2 to 2.63 eV at 1.8 wt % Er3+/TiO2 and to 2.47 eV at 0.6 wt % for Ni2+/TiO2. The initial concentration of Chloroxylenol, catalyst loading, and pH of the solution are the most important factors affecting the solar photocatalytic degradation efficiency that were optimized using Design Expert software (version 6.0.10, Minneapolis, MN, USA, 2003). The results showed that the optimal conditions for Chloroxylenol degradation include a pH of 4, TiO2 loading at 3 g/L, and a Chloroxylenol concentration of 50 mg/L. These conditions resulted in a degradation efficiency of 90.40% after 60 min of direct solar irradiation, wherein the solar energy recorded during a clear sunny day is 1000 W/m2. However, some experiments were conducted on a semi-cloudy day to cover all weather stated and to study the degradation kinetics. During semi-cloudy day experiments, using Er3+/TiO2 and Ni2+/TiO2 with a solar irradiation activity of 600 W/m2 for a 60 min exposure at optimal conditions increased the degradation efficiency from 68.28% for intrinsic TiO2 to 82.38% for Er3+/TiO2 and 80.70% for Ni2+/TiO2.

  • Optimization of Solar Photocatalytic Degradation of Chloroxylenol Using TiO2, Er3+/TiO2, and Ni2+/TiO2 via the Taguchi Orthogonal Array Technique
    2016
    Co-Authors: Ahmed J Mohammed, Abdul Amir H Kadhum, Muneer M. Ba-abbad, Ahmed A. Al-amiery
    Abstract:

    In this study, the optical properties of a TiO2 photocatalyst were enhanced with various impregnations of Er3+ and Ni2+ separately, using the impregnation method as photocatalysts for the direct solar photolysis degradation of Chloroxylenol. The synthesized Er3+/TiO2 and Ni2+/TiO2 catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), metal mapping, and ultraviolet visible (UV–Vis) spectroscopy. The results showed that the Er3+/TiO2 and Ni2+/TiO2 nano-particles have the same structures of TiO2 nano-particles with little difference in particle size. The Er3+ and Ni2+ ions were well-distributed on the TiO2 surface, and it was found that the maximum band gap decreased from 3.13 eV for intrinsic TiO2 to 2.63 eV at 1.8 wt % Er3+/TiO2 and to 2.47 eV at 0.6 wt % for Ni2+/TiO2. The initial concentration of Chloroxylenol, catalyst loading, and pH of the solution are the most important factors affecting the solar photocatalytic degradation efficiency that were optimized using Design Expert software (version 6.0.10, Minneapolis, MN, USA, 2003). The results showed that the optimal conditions for Chloroxylenol degradation include a pH of 4, TiO2 loading at 3 g/L, and a Chloroxylenol concentration of 50 mg/L. These conditions resulted in a degradation efficiency of 90.40% after 60 min of direct solar irradiation, wherein the solar energy recorded during a clear sunny day is 1000 W/m2. However, some experiments were conducted on a semi-cloudy day to cover all weather stated and to study the degradation kinetics. During semi-cloudy day experiments, using Er3+/TiO2 and Ni2+/TiO2 with a solar irradiation activity of 600 W/m2 for a 60 min exposure at optimal conditions increased the degradation efficiency from 68.28% for intrinsic TiO2 to 82.38% for Er3+/TiO2 and 80.70% for Ni2+/TiO2.

Ahmed A. Al-amiery - One of the best experts on this subject based on the ideXlab platform.

  • Optimization of Solar Photocatalytic Degradation of Chloroxylenol Using TiO2, Er3+/TiO2, and Ni2+/TiO2 via the Taguchi Orthogonal Array Technique
    2016
    Co-Authors: Ahmed J Mohammed, Abdul Amir H Kadhum, Muneer M. Ba-abbad, Ahmed A. Al-amiery
    Abstract:

    In this study, the optical properties of a TiO2 photocatalyst were enhanced with various impregnations of Er3+ and Ni2+ separately, using the impregnation method as photocatalysts for the direct solar photolysis degradation of Chloroxylenol. The synthesized Er3+/TiO2 and Ni2+/TiO2 catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), metal mapping, and ultraviolet visible (UV–Vis) spectroscopy. The results showed that the Er3+/TiO2 and Ni2+/TiO2 nano-particles have the same structures of TiO2 nano-particles with little difference in particle size. The Er3+ and Ni2+ ions were well-distributed on the TiO2 surface, and it was found that the maximum band gap decreased from 3.13 eV for intrinsic TiO2 to 2.63 eV at 1.8 wt % Er3+/TiO2 and to 2.47 eV at 0.6 wt % for Ni2+/TiO2. The initial concentration of Chloroxylenol, catalyst loading, and pH of the solution are the most important factors affecting the solar photocatalytic degradation efficiency that were optimized using Design Expert software (version 6.0.10, Minneapolis, MN, USA, 2003). The results showed that the optimal conditions for Chloroxylenol degradation include a pH of 4, TiO2 loading at 3 g/L, and a Chloroxylenol concentration of 50 mg/L. These conditions resulted in a degradation efficiency of 90.40% after 60 min of direct solar irradiation, wherein the solar energy recorded during a clear sunny day is 1000 W/m2. However, some experiments were conducted on a semi-cloudy day to cover all weather stated and to study the degradation kinetics. During semi-cloudy day experiments, using Er3+/TiO2 and Ni2+/TiO2 with a solar irradiation activity of 600 W/m2 for a 60 min exposure at optimal conditions increased the degradation efficiency from 68.28% for intrinsic TiO2 to 82.38% for Er3+/TiO2 and 80.70% for Ni2+/TiO2.

Ahmed A Alamiery - One of the best experts on this subject based on the ideXlab platform.

  • optimization of solar photocatalytic degradation of Chloroxylenol using tio2 er3 tio2 and ni2 tio2 via the taguchi orthogonal array technique
    2016
    Co-Authors: Ahmed J Mohammed, Abdul Amir H Kadhum, Muneer M Baabbad, Ahmed A Alamiery
    Abstract:

    In this study, the optical properties of a TiO2 photocatalyst were enhanced with various impregnations of Er3+ and Ni2+ separately, using the impregnation method as photocatalysts for the direct solar photolysis degradation of Chloroxylenol. The synthesized Er3+/TiO2 and Ni2+/TiO2 catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), metal mapping, and ultraviolet visible (UV–Vis) spectroscopy. The results showed that the Er3+/TiO2 and Ni2+/TiO2 nano-particles have the same structures of TiO2 nano-particles with little difference in particle size. The Er3+ and Ni2+ ions were well-distributed on the TiO2 surface, and it was found that the maximum band gap decreased from 3.13 eV for intrinsic TiO2 to 2.63 eV at 1.8 wt % Er3+/TiO2 and to 2.47 eV at 0.6 wt % for Ni2+/TiO2. The initial concentration of Chloroxylenol, catalyst loading, and pH of the solution are the most important factors affecting the solar photocatalytic degradation efficiency that were optimized using Design Expert software (version 6.0.10, Minneapolis, MN, USA, 2003). The results showed that the optimal conditions for Chloroxylenol degradation include a pH of 4, TiO2 loading at 3 g/L, and a Chloroxylenol concentration of 50 mg/L. These conditions resulted in a degradation efficiency of 90.40% after 60 min of direct solar irradiation, wherein the solar energy recorded during a clear sunny day is 1000 W/m2. However, some experiments were conducted on a semi-cloudy day to cover all weather stated and to study the degradation kinetics. During semi-cloudy day experiments, using Er3+/TiO2 and Ni2+/TiO2 with a solar irradiation activity of 600 W/m2 for a 60 min exposure at optimal conditions increased the degradation efficiency from 68.28% for intrinsic TiO2 to 82.38% for Er3+/TiO2 and 80.70% for Ni2+/TiO2.

Abdul Amir H Kadhum - One of the best experts on this subject based on the ideXlab platform.

  • optimization of solar photocatalytic degradation of Chloroxylenol using tio2 er3 tio2 and ni2 tio2 via the taguchi orthogonal array technique
    2016
    Co-Authors: Ahmed J Mohammed, Abdul Amir H Kadhum, Muneer M Baabbad, Ahmed A Alamiery
    Abstract:

    In this study, the optical properties of a TiO2 photocatalyst were enhanced with various impregnations of Er3+ and Ni2+ separately, using the impregnation method as photocatalysts for the direct solar photolysis degradation of Chloroxylenol. The synthesized Er3+/TiO2 and Ni2+/TiO2 catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), metal mapping, and ultraviolet visible (UV–Vis) spectroscopy. The results showed that the Er3+/TiO2 and Ni2+/TiO2 nano-particles have the same structures of TiO2 nano-particles with little difference in particle size. The Er3+ and Ni2+ ions were well-distributed on the TiO2 surface, and it was found that the maximum band gap decreased from 3.13 eV for intrinsic TiO2 to 2.63 eV at 1.8 wt % Er3+/TiO2 and to 2.47 eV at 0.6 wt % for Ni2+/TiO2. The initial concentration of Chloroxylenol, catalyst loading, and pH of the solution are the most important factors affecting the solar photocatalytic degradation efficiency that were optimized using Design Expert software (version 6.0.10, Minneapolis, MN, USA, 2003). The results showed that the optimal conditions for Chloroxylenol degradation include a pH of 4, TiO2 loading at 3 g/L, and a Chloroxylenol concentration of 50 mg/L. These conditions resulted in a degradation efficiency of 90.40% after 60 min of direct solar irradiation, wherein the solar energy recorded during a clear sunny day is 1000 W/m2. However, some experiments were conducted on a semi-cloudy day to cover all weather stated and to study the degradation kinetics. During semi-cloudy day experiments, using Er3+/TiO2 and Ni2+/TiO2 with a solar irradiation activity of 600 W/m2 for a 60 min exposure at optimal conditions increased the degradation efficiency from 68.28% for intrinsic TiO2 to 82.38% for Er3+/TiO2 and 80.70% for Ni2+/TiO2.

  • Optimization of Solar Photocatalytic Degradation of Chloroxylenol Using TiO2, Er3+/TiO2, and Ni2+/TiO2 via the Taguchi Orthogonal Array Technique
    2016
    Co-Authors: Ahmed J Mohammed, Abdul Amir H Kadhum, Muneer M. Ba-abbad, Ahmed A. Al-amiery
    Abstract:

    In this study, the optical properties of a TiO2 photocatalyst were enhanced with various impregnations of Er3+ and Ni2+ separately, using the impregnation method as photocatalysts for the direct solar photolysis degradation of Chloroxylenol. The synthesized Er3+/TiO2 and Ni2+/TiO2 catalysts were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX), metal mapping, and ultraviolet visible (UV–Vis) spectroscopy. The results showed that the Er3+/TiO2 and Ni2+/TiO2 nano-particles have the same structures of TiO2 nano-particles with little difference in particle size. The Er3+ and Ni2+ ions were well-distributed on the TiO2 surface, and it was found that the maximum band gap decreased from 3.13 eV for intrinsic TiO2 to 2.63 eV at 1.8 wt % Er3+/TiO2 and to 2.47 eV at 0.6 wt % for Ni2+/TiO2. The initial concentration of Chloroxylenol, catalyst loading, and pH of the solution are the most important factors affecting the solar photocatalytic degradation efficiency that were optimized using Design Expert software (version 6.0.10, Minneapolis, MN, USA, 2003). The results showed that the optimal conditions for Chloroxylenol degradation include a pH of 4, TiO2 loading at 3 g/L, and a Chloroxylenol concentration of 50 mg/L. These conditions resulted in a degradation efficiency of 90.40% after 60 min of direct solar irradiation, wherein the solar energy recorded during a clear sunny day is 1000 W/m2. However, some experiments were conducted on a semi-cloudy day to cover all weather stated and to study the degradation kinetics. During semi-cloudy day experiments, using Er3+/TiO2 and Ni2+/TiO2 with a solar irradiation activity of 600 W/m2 for a 60 min exposure at optimal conditions increased the degradation efficiency from 68.28% for intrinsic TiO2 to 82.38% for Er3+/TiO2 and 80.70% for Ni2+/TiO2.

A D Russell - One of the best experts on this subject based on the ideXlab platform.

  • Chloroxylenol and triclosan tolerant bacteria from industrial sources susceptibility to antibiotics and other biocides
    2006
    Co-Authors: J C Lear, Jeanyves Maillard, P W Dettmar, P A Goddard, A D Russell
    Abstract:

    Abstract This study aimed to determine the degree of susceptibility of several industrial bacterial isolates tolerant to para-chloro-meta-xylenol, triclosan, three other commonly used biocides, and to a range of clinically significant antibiotics. Minimum inhibitory concentrations (MICs) of benzalkonium chloride, chlorhexidine and phenol were determined and compared with those of standard strains. When elevated MICs were exhibited, suspension efficacy tests were carried out to assess the lethal efficacy of these biocides. Antibiotic sensitivity profiles were initially determined by disk diffusion testing, and antibiotic MICs by a gradient plate method. Biocide MICs were largely similar between industrial and standard strains, although isolates of Acinetobacter johnsonii showed elevated benzalkonium chloride MICs, which were not reflected in terms of lethal effects. Antibiotic sensitivities did not vary greatly between strains. An industrial triclosan-tolerant strain of Citrobacter freundii showed a slightly higher resistance to some antibiotics, but in most cases this was recorded as “sensitive” according to the guidelines used. Chloramphenicol resistance was shown in the triclosan-tolerant strain of A. johnsonii, but also in the sensitive revertant strain, suggesting that this property is intrinsic to the strain and unrelated to triclosan tolerance. This study did not produce evidence suggesting that tolerance to triclosan or para-chloro-meta-xylenol in industrial bacterial isolates promotes the emergence of tolerance to other biocides or increases resistance to antibiotics.

  • Chloroxylenol and triclosan tolerant bacteria from industrial sources
    2002
    Co-Authors: J C Lear, Jeanyves Maillard, P W Dettmar, P A Goddard, A D Russell
    Abstract:

    Potential development of bacterial tolerance to biocides in the industrial environment is examined in this study. Bacteria tolerant to the phenolic-type agent para-chloro-meta-xylenol (PCMX) and the bis-phenol 2,4,4'-trichloro-2'-hydroxydiphenylether (triclosan) were isolated from industrial sources and identified. Minimum inhibitory concentrations (MICs) were determined and compared with those of culture collection (standard) strains. Of around 100 isolates originally obtained, most were naturally tolerant species such as Pseudomonas spp., or showed low tolerance levels. PCMX-tolerant isolates of Pseudomonas stutzeri and triclosan-tolerant isolates of Citrobacter freundii and Acinetobacter johnsonii were retained for further study. Of these, only P. stutzeri and A. johnsonii showed elevated tolerance compared with the standard strains. There was no evidence of tolerance to the other biocide except for Pseudomonas aeruginosa (an intrinsically tolerant microorganism), and tolerances were stable in the absence of selective pressure except for A. johnsonii. Attempts to select or generate increased tolerance in the standard strains were unsuccessful. High tolerances in terms of MIC were not reflected in terms of lethal effects. This study did not produce any evidence suggesting that the presence of residual biocide concentrations in the industrial environment promotes the emergence of bacterial tolerance for them.