The Experts below are selected from a list of 3 Experts worldwide ranked by ideXlab platform

Wang Jilin - One of the best experts on this subject based on the ideXlab platform.

  • Investigation on preparation condition of Li-Fe/pillared layered Clays Catalysts
    Industrial Catalysis, 2020
    Co-Authors: Yu Tingyun, Wang Jilin
    Abstract:

    Pillared layered Clays Catalysts were prepared from kaolin,NaOH and AlCl_3 and used as the carrier for preparation of Li-Fe/pillared layered Clays Catalysts by impregnation.Light olefins polymeriza- tion was investigated over the Catalyst in a high pressure autoclave to produce lube base oil.Lube base oil yield of up to 58.2%,kinematic viscosity at 40 ℃ of 10.28 mm~2·s~(-1),at 100 ℃ of 2.63 mm~2·s~(-1), viscosity index of 125 and bromine valence of 11.40 g·(100 g)~(-1) were obtained when the Li-Fe/ pillared layered Clays Catalyst was prepared under the following condition:n (NaOH):n (AlCl_3) = 2.3, reaction temperature 75℃,dosage of the Clays 150 g·L~(-1),w(Fe) =6%,w(Li) =6%,calcination at 480℃ for 4 h.

Yu Tingyun - One of the best experts on this subject based on the ideXlab platform.

  • Investigation on preparation condition of Li-Fe/pillared layered Clays Catalysts
    Industrial Catalysis, 2020
    Co-Authors: Yu Tingyun, Wang Jilin
    Abstract:

    Pillared layered Clays Catalysts were prepared from kaolin,NaOH and AlCl_3 and used as the carrier for preparation of Li-Fe/pillared layered Clays Catalysts by impregnation.Light olefins polymeriza- tion was investigated over the Catalyst in a high pressure autoclave to produce lube base oil.Lube base oil yield of up to 58.2%,kinematic viscosity at 40 ℃ of 10.28 mm~2·s~(-1),at 100 ℃ of 2.63 mm~2·s~(-1), viscosity index of 125 and bromine valence of 11.40 g·(100 g)~(-1) were obtained when the Li-Fe/ pillared layered Clays Catalyst was prepared under the following condition:n (NaOH):n (AlCl_3) = 2.3, reaction temperature 75℃,dosage of the Clays 150 g·L~(-1),w(Fe) =6%,w(Li) =6%,calcination at 480℃ for 4 h.