The Experts below are selected from a list of 942 Experts worldwide ranked by ideXlab platform

Tachtatzis C - One of the best experts on this subject based on the ideXlab platform.

  • Using animal‐mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G, Mitchell M, Barker Z, Giebel K, Amory J, Michie C, Davison C, Tachtatzis C, Duthie C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew’s correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

  • Using animal-mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G.a., Mitchell M, Giebel K, Michie C, Davison C, Barker Z.e., Codling E.a., Tachtatzis C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew's correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

Duthie C - One of the best experts on this subject based on the ideXlab platform.

  • Using animal‐mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G, Mitchell M, Barker Z, Giebel K, Amory J, Michie C, Davison C, Tachtatzis C, Duthie C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew’s correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

Namje Park - One of the best experts on this subject based on the ideXlab platform.

  • a data verification system for cctv surveillance Cameras using blockchain technology in smart cities
    Electronics, 2020
    Co-Authors: Prince Waqas Khan, Yungcheol Byun, Namje Park
    Abstract:

    The video created by a surveillance Cameras plays a crucial role in crime prevention and examinations in smart cities. The Closed-Circuit Television Camera (CCTV) is essential for a range of public uses in a smart city; combined with Internet of Things (IoT) technologies they can turn into smart sensors that help to ensure safety and security. However, the authenticity of the Camera itself raises issues of building up integrity and suitability of data. In this paper, we present a blockchain-based system to guarantee the trustworthiness of the stored recordings, allowing authorities to validate whether or not a video has been altered. It helps to discriminate fake videos from original ones and to make sure that surveillance Cameras are authentic. Since the distributed ledger of the blockchain records the metadata of the CCTV video as well, it is obstructing the chance of forgery of the data. This immutable ledger diminishes the risk of copyright encroachment for law enforcement agencies and clients users by securing possession and identity.

Giebel K - One of the best experts on this subject based on the ideXlab platform.

  • Using animal‐mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G, Mitchell M, Barker Z, Giebel K, Amory J, Michie C, Davison C, Tachtatzis C, Duthie C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew’s correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

  • Using animal-mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G.a., Mitchell M, Giebel K, Michie C, Davison C, Barker Z.e., Codling E.a., Tachtatzis C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew's correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

Michie C - One of the best experts on this subject based on the ideXlab platform.

  • Using animal‐mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G, Mitchell M, Barker Z, Giebel K, Amory J, Michie C, Davison C, Tachtatzis C, Duthie C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew’s correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

  • Using animal-mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows
    'Cambridge University Press (CUP)', 2020
    Co-Authors: Miller G.a., Mitchell M, Giebel K, Michie C, Davison C, Barker Z.e., Codling E.a., Tachtatzis C
    Abstract:

    Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing Closed-Circuit Television Camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew's correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf