The Experts below are selected from a list of 162 Experts worldwide ranked by ideXlab platform

Shamsul Bahari Mohd Noor - One of the best experts on this subject based on the ideXlab platform.

  • Improvement of data refresh rate for dual serial port to Universal Serial Bus acquisition system
    2009 IEEE International Conference on Virtual Environments Human-Computer Interfaces and Measurements Systems, 2009
    Co-Authors: Syed Sulaiman Bin Kaja Mohideen, Shamsul Bahari Mohd Noor
    Abstract:

    Before the universal serial bus(USB) technologies has become popular, there are a lot of software and hardware Computer Peripheral development based on traditional external interface like general purpose interface bus ( GPIB- IEEE488), parallel port, serial port and PS/2. Developing these custom software and hardware Computer Peripheral is less difficult as compared to Peripheral that is designed based on USB. The main reason for the difficulty is that the USB is designed to be user friendly but not developer friendly. For that reason, many developers will maintain using the traditional port when designing their custom application. To support traditional interface on newer PC with only USB port, there are devices in the market to convert the old external port to USB. One of the converters is the USB to dual serial converter. In the market, there are products which are readily available. However, it lacks of certain capability such as the ability to access serial port simultaneously which reduce the data refresh rate. The main purpose of this paper is to discuss technique in designing a USB to serial converter with capability of connecting two serial devices which is accessible simultaneously to improve the data refresh rate.

  • VECIMS - Improvement of data refresh rate for dual serial port to Universal Serial Bus acquisition system
    2009 IEEE International Conference on Virtual Environments Human-Computer Interfaces and Measurements Systems, 2009
    Co-Authors: Syed Sulaiman Bin Kaja Mohideen, Shamsul Bahari Mohd Noor
    Abstract:

    Before the Universal Serial Bus(USB) Technologies has become popular, there are a lot of software and hardware Computer Peripheral development based on traditional external interface like General Purpose Interface Bus ( GPIB- IEEE488), parallel port, serial port and PS/2. Developing these custom software and hardware Computer Peripheral is less difficult as compared to Peripheral that is designed based on USB. The main reason for the difficulty is that the USB is designed to be user friendly but not developer friendly. For that reason, many developers will maintain using the traditional port when designing their custom application. To support traditional interface on newer PC with only USB port, there are devices in the market to convert the old external port to USB. One of the converters is the USB to dual serial converter. In the market, there are products which are readily available. However, it lacks of certain capability such as the ability to access serial port simultaneously which reduce the data refresh rate. The main purpose of this paper is to discuss technique in designing a USB to serial converter with capability of connecting two serial devices which is accessible simultaneously to improve the data refresh rate.

Syed Sulaiman Bin Kaja Mohideen - One of the best experts on this subject based on the ideXlab platform.

  • Improvement of data refresh rate for dual serial port to Universal Serial Bus acquisition system
    2009 IEEE International Conference on Virtual Environments Human-Computer Interfaces and Measurements Systems, 2009
    Co-Authors: Syed Sulaiman Bin Kaja Mohideen, Shamsul Bahari Mohd Noor
    Abstract:

    Before the universal serial bus(USB) technologies has become popular, there are a lot of software and hardware Computer Peripheral development based on traditional external interface like general purpose interface bus ( GPIB- IEEE488), parallel port, serial port and PS/2. Developing these custom software and hardware Computer Peripheral is less difficult as compared to Peripheral that is designed based on USB. The main reason for the difficulty is that the USB is designed to be user friendly but not developer friendly. For that reason, many developers will maintain using the traditional port when designing their custom application. To support traditional interface on newer PC with only USB port, there are devices in the market to convert the old external port to USB. One of the converters is the USB to dual serial converter. In the market, there are products which are readily available. However, it lacks of certain capability such as the ability to access serial port simultaneously which reduce the data refresh rate. The main purpose of this paper is to discuss technique in designing a USB to serial converter with capability of connecting two serial devices which is accessible simultaneously to improve the data refresh rate.

  • VECIMS - Improvement of data refresh rate for dual serial port to Universal Serial Bus acquisition system
    2009 IEEE International Conference on Virtual Environments Human-Computer Interfaces and Measurements Systems, 2009
    Co-Authors: Syed Sulaiman Bin Kaja Mohideen, Shamsul Bahari Mohd Noor
    Abstract:

    Before the Universal Serial Bus(USB) Technologies has become popular, there are a lot of software and hardware Computer Peripheral development based on traditional external interface like General Purpose Interface Bus ( GPIB- IEEE488), parallel port, serial port and PS/2. Developing these custom software and hardware Computer Peripheral is less difficult as compared to Peripheral that is designed based on USB. The main reason for the difficulty is that the USB is designed to be user friendly but not developer friendly. For that reason, many developers will maintain using the traditional port when designing their custom application. To support traditional interface on newer PC with only USB port, there are devices in the market to convert the old external port to USB. One of the converters is the USB to dual serial converter. In the market, there are products which are readily available. However, it lacks of certain capability such as the ability to access serial port simultaneously which reduce the data refresh rate. The main purpose of this paper is to discuss technique in designing a USB to serial converter with capability of connecting two serial devices which is accessible simultaneously to improve the data refresh rate.

John Clemens - One of the best experts on this subject based on the ideXlab platform.

  • Learning Device Models with Recurrent Neural Networks
    2018 International Joint Conference on Neural Networks (IJCNN), 2018
    Co-Authors: John Clemens
    Abstract:

    Recurrent neural networks (RNNs) are powerful constructs capable of modeling complex systems, up to and including Turing Machines. However, learning such complex models from finite training sets can be difficult. In this paper we empirically show that RNNs can learn models of Computer Peripheral devices through input and output state observation. This enables automated development of functional software-only models of hardware devices. Such models are applicable to any number of tasks, including device validation, driver development, code de-obfuscation, and reverse engineering. We show that the same RNN structure successfully models six different devices from simple test circuits up to a 16550 UART serial port, and verify that these models are capable of producing equivalent output to real hardware.

Liu Zhao-chun - One of the best experts on this subject based on the ideXlab platform.

Fan Li-xian - One of the best experts on this subject based on the ideXlab platform.