Connection Control

14,000,000 Leading Edge Experts on the ideXlab platform

Scan Science and Technology

Contact Leading Edge Experts & Companies

Scan Science and Technology

Contact Leading Edge Experts & Companies

The Experts below are selected from a list of 327 Experts worldwide ranked by ideXlab platform

Wu Lei - One of the best experts on this subject based on the ideXlab platform.

  • Grid Connection Control of the Doubly-fed Wind Power System
    IEEE Transactions on Power Electronics, 2011
    Co-Authors: Wu Lei
    Abstract:

    In order to reduce the impact of the connected-grid current and connected with the grid safely,the operat-ing characteristics and vector model of variable speed constant frequency doubly-fed wind power generator are ana-lyzed and an idle load grid-Connection Control strategy is proposed based on grid voltage orientation.The model of doubly-fed induction generator before the Connection with the grid is founded and one kind of new model software l-ock appearance ring(SPLL) is used to track the electrified wire netting voltage phase rapidly accurately is adopted.The experiment platform is built to carry out the connected-grid process.The results show that the proposed Control strate-gy is an ideal connected way which can effectively Control the stator voltage as the same as electrical network and realize grid Connection without overshoot current at different speed.

I-hsuan Peng - One of the best experts on this subject based on the ideXlab platform.

  • Connection Control by virtual admission in wireless LAN environment
    Lecture Notes in Computer Science, 2006
    Co-Authors: Yen-wen Chen, Yuan-long Lee, I-hsuan Peng
    Abstract:

    The traditional wireless technology confronted with some shortcomings in practical use, such as insufficiency for bandwidth, and lack of guaranteed on Quality of Services (QoS). Both of the packet scheduling and Connection admission Control are the main consideration issues toward QoS networks. These two issues are mutually correlated. In this paper, we propose a measurement based with fake priority scheme for the Control of Connection admission in WLAN. As the concept of the virtual source and virtual MAC (VS/VMAC) is applied, the proposed scheme will not affect the transmission of existing traffic during traffic probing. The proposed scheme also provides a difference factor (D factor) for the compensation of the performance measured by VMAC. This factor is also applied to Control the tightness of the policy of Connection acceptance. The simulations results show that the proposed scheme can effectively manage the Connection requests while maintaining QoS in WLAN.

  • WASA - Connection Control by virtual admission in wireless LAN environment
    Wireless Algorithms Systems and Applications, 2006
    Co-Authors: Yen-wen Chen, Yuan-long Lee, I-hsuan Peng
    Abstract:

    The traditional wireless technology confronted with some short-comings in practical use, such as insufficiency for bandwidth, and lack of guaranteed on Quality of Services (QoS). Both of the packet scheduling and Connection admission Control are the main consideration issues toward QoS networks. These two issues are mutually correlated. In this paper, we propose a measurement based with fake priority scheme for the Control of Connection admission in WLAN. As the concept of the virtual source and virtual MAC (VS/VMAC) is applied, the proposed scheme will not affect the transmission of existing traffic during traffic probing. The proposed scheme also provides a difference factor (D factor) for the compensation of the performance measured by VMAC. This factor is also applied to Control the tightness of the policy of Connection acceptance. The simulations results show that the proposed scheme can effectively manage the Connection requests while maintaining QoS in WLAN.

Feng Jing - One of the best experts on this subject based on the ideXlab platform.

  • Load Cutting-in Control of Variable-Speed Constant-Freqency (VSCF) Wind-Power Generator
    Electric Machines and Control Application, 2009
    Co-Authors: Feng Jing
    Abstract:

    Running principle of the grid-Connection process of doubly-fed generator was discussed.Grid-Connection Control strategy of generator was investigated based on stator-oriented vector Control technique.Contrasting and simulating the principle of the grid-Connection with load and with no load,the generator of the load cutting-in Control can Control wind energy in cooperate with wind turbine,which can relieves the stress of windturbine from wind and improve the speed adjustment ability of system.The simulation model of grid-Connection process of doubly-fed generator was founded.The simulation result verified the impact current was very small and the validity and feasibility of the grid-Connection Control strategy of doubly-fed generator.

  • Study on the load cutting-in Control of the variable-speed constant-freqency(VSCF)wind-power generator
    Power System Protection and Control, 2009
    Co-Authors: Feng Jing
    Abstract:

    Running principle of the grid-Connection process of doubly-fed generator is discussed.Grid-Connection Control strategy of generator is investigated based on stator-oriented vector Control technique .The principles of the grid-Connection with load and on no load are contrasted and analyzed.The generator of the load cutting-in Control can Control wind energy in cooperation with windturbine , which can relieve the stress of windturbine from wind and improve the speed adjustment ability of system.The simulation model of grid-Connection process of doubly-fed generator is founded.The simulation result verifies the impact current is very small and the validity and feasibility of the grid-Connection Control strategy of doubly-fed generator.

Yen-wen Chen - One of the best experts on this subject based on the ideXlab platform.

  • Connection Control by virtual admission in wireless LAN environment
    Lecture Notes in Computer Science, 2006
    Co-Authors: Yen-wen Chen, Yuan-long Lee, I-hsuan Peng
    Abstract:

    The traditional wireless technology confronted with some shortcomings in practical use, such as insufficiency for bandwidth, and lack of guaranteed on Quality of Services (QoS). Both of the packet scheduling and Connection admission Control are the main consideration issues toward QoS networks. These two issues are mutually correlated. In this paper, we propose a measurement based with fake priority scheme for the Control of Connection admission in WLAN. As the concept of the virtual source and virtual MAC (VS/VMAC) is applied, the proposed scheme will not affect the transmission of existing traffic during traffic probing. The proposed scheme also provides a difference factor (D factor) for the compensation of the performance measured by VMAC. This factor is also applied to Control the tightness of the policy of Connection acceptance. The simulations results show that the proposed scheme can effectively manage the Connection requests while maintaining QoS in WLAN.

  • WASA - Connection Control by virtual admission in wireless LAN environment
    Wireless Algorithms Systems and Applications, 2006
    Co-Authors: Yen-wen Chen, Yuan-long Lee, I-hsuan Peng
    Abstract:

    The traditional wireless technology confronted with some short-comings in practical use, such as insufficiency for bandwidth, and lack of guaranteed on Quality of Services (QoS). Both of the packet scheduling and Connection admission Control are the main consideration issues toward QoS networks. These two issues are mutually correlated. In this paper, we propose a measurement based with fake priority scheme for the Control of Connection admission in WLAN. As the concept of the virtual source and virtual MAC (VS/VMAC) is applied, the proposed scheme will not affect the transmission of existing traffic during traffic probing. The proposed scheme also provides a difference factor (D factor) for the compensation of the performance measured by VMAC. This factor is also applied to Control the tightness of the policy of Connection acceptance. The simulations results show that the proposed scheme can effectively manage the Connection requests while maintaining QoS in WLAN.

Voicu Groza - One of the best experts on this subject based on the ideXlab platform.

  • Modeling, Control design and simulation of a grid Connection Control mode for a small variable-speed wind turbine system
    2009 IEEE Electrical Power & Energy Conference (EPEC), 2009
    Co-Authors: Lucian Mihet-popa, Voicu Groza
    Abstract:

    In this paper, a variable-speed wind turbine generator system with a vector Controlled back-to-back PWM-VSI on the stator side has been modeled, designed and simulated to study its steady state and dynamic behavior. The grid Connection Control mode of a wind turbine based on a flexible dSPACE digital signal processor system that allows user-friendly code development, monitoring and online tuning is used. The design of an LCL-filter, current Controller and DC-link voltage Controller are described in detail. The PI-Controllers are designed using pole-zero placement technique and the gain of the regulators are found using root locus method. The experimental results demonstrate the performance of the design procedure. A good agreement between simulation and experimental results was obtained.

  • Modeling and Design of a Grid Connection Control Mode for a Small Variable-Speed Wind Turbine System
    2008 IEEE Instrumentation and Measurement Technology Conference, 2008
    Co-Authors: Lucian Mihet-popa, Voicu Groza, Octavian Prostean, Iosif Szeidert
    Abstract:

    In this paper, a variable-speed wind turbine generator system with a vector Controlled back-to-back PWM- VSI on the stator side has been modeled, designed and simulated to study its steady state and dynamic behavior. The grid Connection Control mode of a wind turbine based on a flexible dSPACE digital signal processor system that allows user-friendly code development, monitoring and online tuning is used. The design of an LCL-filter, current Controller and DC-link voltage Controller are described in detail. The PI- Controllers are designed using pole-zero placement technique and the gain of the regulators are found using root locus method.