The Experts below are selected from a list of 13182 Experts worldwide ranked by ideXlab platform
Christoph Schick - One of the best experts on this subject based on the ideXlab platform.
-
Influence of the Cross-Link Density on the Rate of Crystallization of Poly(ε-Caprolactone).
Polymers, 2018Co-Authors: Igor A. Sedov, Timur Magsumov, Albert Abdullin, Egor Yarko, Timur A. Mukhametzyanov, Alexander Klimovitsky, Christoph SchickAbstract:Cross-linked poly(e-caprolactone) (PCL) is a smart biocompatible polymer exhibiting two-way shape memory effect. PCL Samples with different cross-link density were synthesized by heating the polymer with various amounts of radical initiator benzoyl peroxide (BPO). Non-isothermal crystallization kinetics was characterized by means of conventional differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC). The latter technique was used to obtain the dependence of the degree of crystallinity on the preceding cooling rate by following the enthalpies of melting for each Sample. It is shown that the cooling rate required to keep the Cooled Sample amorphous decreases with increasing cross-link density, i.e., crystallization process slows down monotonically. Covalent bonds between polymer chains impede the crystallization process. Consequently, FSC can be used as a rather quick and low Sample consuming method to estimate the degree of cross-linking of PCL Samples.
-
influence of the cross link density on the rate of crystallization of poly e caprolactone
Polymers, 2018Co-Authors: Igor A. Sedov, Timur Magsumov, Albert Abdullin, Egor Yarko, Timur A. Mukhametzyanov, Alexander Klimovitsky, Christoph SchickAbstract:Cross-linked poly(e-caprolactone) (PCL) is a smart biocompatible polymer exhibiting two-way shape memory effect. PCL Samples with different cross-link density were synthesized by heating the polymer with various amounts of radical initiator benzoyl peroxide (BPO). Non-isothermal crystallization kinetics was characterized by means of conventional differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC). The latter technique was used to obtain the dependence of the degree of crystallinity on the preceding cooling rate by following the enthalpies of melting for each Sample. It is shown that the cooling rate required to keep the Cooled Sample amorphous decreases with increasing cross-link density, i.e., crystallization process slows down monotonically. Covalent bonds between polymer chains impede the crystallization process. Consequently, FSC can be used as a rather quick and low Sample consuming method to estimate the degree of cross-linking of PCL Samples.
Kazuhiro Hono - One of the best experts on this subject based on the ideXlab platform.
-
correlation of microchemistry of cell boundary phase and interface structure to the coercivity of sm co 0 784 fe 0 100 cu 0 088 zr 0 028 7 19 sintered magnets
Acta Materialia, 2017Co-Authors: H Sepehriamin, J. Thielsch, Johann Fischbacher, Tadakatsu Ohkubo, Thomas Schrefl, Oliver Gutfleisch, Kazuhiro HonoAbstract:We revisited the microstructure of Sm2Co17-type sintered magnets to understand the underlying mechanism of substantial decrease of coercivity from 2.56 T for the optimally annealed Sample to 0.14 T for the Sample re-annealed at aging temperature of 850 °C for just 1 min and quenched (quenched Sample). This low coercivity can be recovered by annealing of the magnet at 850 °C, slow cooling to 400 °C followed by quenching (slowly Cooled Sample) and with this is fully reversible between the two states. Magnetic domain observations of thermally demagnetized Samples with c-axis out-of-plane showed an ultra-fine maze-like domain pattern comparable to the cell size in the slowly Cooled Sample. However, annealing at 850 °C, even for a short time, followed by quenching resulted in a substantial increase in the size of maze-like domain pattern. Microchemistry of the SmCo5 cell boundary phase for two Samples was analyzed using 3D atom probe. 8.6 at. % Cu and 7.7 at. % Fe was found in the cell boundary of the quenched Sample while the SmCo5 cell boundary phase of the slowly Cooled Sample contains 15.4 at. % Cu and 3.0 at. % Fe. Unlike the slowly Cooled Sample, a broader distribution of Cu than Sm was found in the cell boundary of the quenched Sample. High resolution STEM-HAADF results showed SmCo5/Sm2Co17 interface is sharp and defect free for the slowly Cooled Sample while it is rough and zigzag shaped for the quenched Sample. Diffused Cu into the matrix phase from the cell boundary results in a gradual increase of magnetocrystalline anisotropy form matrix to the cell boundary phase. Large Fe concentration in the cell boundary phase reduces its magnetocrystalline anisotropy. Micromagnetic simulations showed that these microstructural features of the quenched Sample cause a weak pinning strength of the cell boundary phase explaining its low coercivity.
-
Correlation of microchemistry of cell boundary phase and interface structure to the coercivity of Sm(Co0.784Fe0.100Cu0.088Zr0.028)7.19 sintered magnets
Acta Materialia, 2017Co-Authors: H. Sepehri-amin, J. Thielsch, Johann Fischbacher, Tadakatsu Ohkubo, Thomas Schrefl, Oliver Gutfleisch, Kazuhiro HonoAbstract:We revisited the microstructure of Sm2Co17-type sintered magnets to understand the underlying mechanism of substantial decrease of coercivity from 2.56 T for the optimally annealed Sample to 0.14 T for the Sample re-annealed at aging temperature of 850 °C for just 1 min and quenched (quenched Sample). This low coercivity can be recovered by annealing of the magnet at 850 °C, slow cooling to 400 °C followed by quenching (slowly Cooled Sample) and with this is fully reversible between the two states. Magnetic domain observations of thermally demagnetized Samples with c-axis out-of-plane showed an ultra-fine maze-like domain pattern comparable to the cell size in the slowly Cooled Sample. However, annealing at 850 °C, even for a short time, followed by quenching resulted in a substantial increase in the size of maze-like domain pattern. Microchemistry of the SmCo5 cell boundary phase for two Samples was analyzed using 3D atom probe. 8.6 at. % Cu and 7.7 at. % Fe was found in the cell boundary of the quenched Sample while the SmCo5 cell boundary phase of the slowly Cooled Sample contains 15.4 at. % Cu and 3.0 at. % Fe. Unlike the slowly Cooled Sample, a broader distribution of Cu than Sm was found in the cell boundary of the quenched Sample. High resolution STEM-HAADF results showed SmCo5/Sm2Co17 interface is sharp and defect free for the slowly Cooled Sample while it is rough and zigzag shaped for the quenched Sample. Diffused Cu into the matrix phase from the cell boundary results in a gradual increase of magnetocrystalline anisotropy form matrix to the cell boundary phase. Large Fe concentration in the cell boundary phase reduces its magnetocrystalline anisotropy. Micromagnetic simulations showed that these microstructural features of the quenched Sample cause a weak pinning strength of the cell boundary phase explaining its low coercivity.
Igor A. Sedov - One of the best experts on this subject based on the ideXlab platform.
-
Influence of the Cross-Link Density on the Rate of Crystallization of Poly(ε-Caprolactone).
Polymers, 2018Co-Authors: Igor A. Sedov, Timur Magsumov, Albert Abdullin, Egor Yarko, Timur A. Mukhametzyanov, Alexander Klimovitsky, Christoph SchickAbstract:Cross-linked poly(e-caprolactone) (PCL) is a smart biocompatible polymer exhibiting two-way shape memory effect. PCL Samples with different cross-link density were synthesized by heating the polymer with various amounts of radical initiator benzoyl peroxide (BPO). Non-isothermal crystallization kinetics was characterized by means of conventional differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC). The latter technique was used to obtain the dependence of the degree of crystallinity on the preceding cooling rate by following the enthalpies of melting for each Sample. It is shown that the cooling rate required to keep the Cooled Sample amorphous decreases with increasing cross-link density, i.e., crystallization process slows down monotonically. Covalent bonds between polymer chains impede the crystallization process. Consequently, FSC can be used as a rather quick and low Sample consuming method to estimate the degree of cross-linking of PCL Samples.
-
influence of the cross link density on the rate of crystallization of poly e caprolactone
Polymers, 2018Co-Authors: Igor A. Sedov, Timur Magsumov, Albert Abdullin, Egor Yarko, Timur A. Mukhametzyanov, Alexander Klimovitsky, Christoph SchickAbstract:Cross-linked poly(e-caprolactone) (PCL) is a smart biocompatible polymer exhibiting two-way shape memory effect. PCL Samples with different cross-link density were synthesized by heating the polymer with various amounts of radical initiator benzoyl peroxide (BPO). Non-isothermal crystallization kinetics was characterized by means of conventional differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC). The latter technique was used to obtain the dependence of the degree of crystallinity on the preceding cooling rate by following the enthalpies of melting for each Sample. It is shown that the cooling rate required to keep the Cooled Sample amorphous decreases with increasing cross-link density, i.e., crystallization process slows down monotonically. Covalent bonds between polymer chains impede the crystallization process. Consequently, FSC can be used as a rather quick and low Sample consuming method to estimate the degree of cross-linking of PCL Samples.
Oliver Gutfleisch - One of the best experts on this subject based on the ideXlab platform.
-
correlation of microchemistry of cell boundary phase and interface structure to the coercivity of sm co 0 784 fe 0 100 cu 0 088 zr 0 028 7 19 sintered magnets
Acta Materialia, 2017Co-Authors: H Sepehriamin, J. Thielsch, Johann Fischbacher, Tadakatsu Ohkubo, Thomas Schrefl, Oliver Gutfleisch, Kazuhiro HonoAbstract:We revisited the microstructure of Sm2Co17-type sintered magnets to understand the underlying mechanism of substantial decrease of coercivity from 2.56 T for the optimally annealed Sample to 0.14 T for the Sample re-annealed at aging temperature of 850 °C for just 1 min and quenched (quenched Sample). This low coercivity can be recovered by annealing of the magnet at 850 °C, slow cooling to 400 °C followed by quenching (slowly Cooled Sample) and with this is fully reversible between the two states. Magnetic domain observations of thermally demagnetized Samples with c-axis out-of-plane showed an ultra-fine maze-like domain pattern comparable to the cell size in the slowly Cooled Sample. However, annealing at 850 °C, even for a short time, followed by quenching resulted in a substantial increase in the size of maze-like domain pattern. Microchemistry of the SmCo5 cell boundary phase for two Samples was analyzed using 3D atom probe. 8.6 at. % Cu and 7.7 at. % Fe was found in the cell boundary of the quenched Sample while the SmCo5 cell boundary phase of the slowly Cooled Sample contains 15.4 at. % Cu and 3.0 at. % Fe. Unlike the slowly Cooled Sample, a broader distribution of Cu than Sm was found in the cell boundary of the quenched Sample. High resolution STEM-HAADF results showed SmCo5/Sm2Co17 interface is sharp and defect free for the slowly Cooled Sample while it is rough and zigzag shaped for the quenched Sample. Diffused Cu into the matrix phase from the cell boundary results in a gradual increase of magnetocrystalline anisotropy form matrix to the cell boundary phase. Large Fe concentration in the cell boundary phase reduces its magnetocrystalline anisotropy. Micromagnetic simulations showed that these microstructural features of the quenched Sample cause a weak pinning strength of the cell boundary phase explaining its low coercivity.
-
Correlation of microchemistry of cell boundary phase and interface structure to the coercivity of Sm(Co0.784Fe0.100Cu0.088Zr0.028)7.19 sintered magnets
Acta Materialia, 2017Co-Authors: H. Sepehri-amin, J. Thielsch, Johann Fischbacher, Tadakatsu Ohkubo, Thomas Schrefl, Oliver Gutfleisch, Kazuhiro HonoAbstract:We revisited the microstructure of Sm2Co17-type sintered magnets to understand the underlying mechanism of substantial decrease of coercivity from 2.56 T for the optimally annealed Sample to 0.14 T for the Sample re-annealed at aging temperature of 850 °C for just 1 min and quenched (quenched Sample). This low coercivity can be recovered by annealing of the magnet at 850 °C, slow cooling to 400 °C followed by quenching (slowly Cooled Sample) and with this is fully reversible between the two states. Magnetic domain observations of thermally demagnetized Samples with c-axis out-of-plane showed an ultra-fine maze-like domain pattern comparable to the cell size in the slowly Cooled Sample. However, annealing at 850 °C, even for a short time, followed by quenching resulted in a substantial increase in the size of maze-like domain pattern. Microchemistry of the SmCo5 cell boundary phase for two Samples was analyzed using 3D atom probe. 8.6 at. % Cu and 7.7 at. % Fe was found in the cell boundary of the quenched Sample while the SmCo5 cell boundary phase of the slowly Cooled Sample contains 15.4 at. % Cu and 3.0 at. % Fe. Unlike the slowly Cooled Sample, a broader distribution of Cu than Sm was found in the cell boundary of the quenched Sample. High resolution STEM-HAADF results showed SmCo5/Sm2Co17 interface is sharp and defect free for the slowly Cooled Sample while it is rough and zigzag shaped for the quenched Sample. Diffused Cu into the matrix phase from the cell boundary results in a gradual increase of magnetocrystalline anisotropy form matrix to the cell boundary phase. Large Fe concentration in the cell boundary phase reduces its magnetocrystalline anisotropy. Micromagnetic simulations showed that these microstructural features of the quenched Sample cause a weak pinning strength of the cell boundary phase explaining its low coercivity.
J. Thielsch - One of the best experts on this subject based on the ideXlab platform.
-
correlation of microchemistry of cell boundary phase and interface structure to the coercivity of sm co 0 784 fe 0 100 cu 0 088 zr 0 028 7 19 sintered magnets
Acta Materialia, 2017Co-Authors: H Sepehriamin, J. Thielsch, Johann Fischbacher, Tadakatsu Ohkubo, Thomas Schrefl, Oliver Gutfleisch, Kazuhiro HonoAbstract:We revisited the microstructure of Sm2Co17-type sintered magnets to understand the underlying mechanism of substantial decrease of coercivity from 2.56 T for the optimally annealed Sample to 0.14 T for the Sample re-annealed at aging temperature of 850 °C for just 1 min and quenched (quenched Sample). This low coercivity can be recovered by annealing of the magnet at 850 °C, slow cooling to 400 °C followed by quenching (slowly Cooled Sample) and with this is fully reversible between the two states. Magnetic domain observations of thermally demagnetized Samples with c-axis out-of-plane showed an ultra-fine maze-like domain pattern comparable to the cell size in the slowly Cooled Sample. However, annealing at 850 °C, even for a short time, followed by quenching resulted in a substantial increase in the size of maze-like domain pattern. Microchemistry of the SmCo5 cell boundary phase for two Samples was analyzed using 3D atom probe. 8.6 at. % Cu and 7.7 at. % Fe was found in the cell boundary of the quenched Sample while the SmCo5 cell boundary phase of the slowly Cooled Sample contains 15.4 at. % Cu and 3.0 at. % Fe. Unlike the slowly Cooled Sample, a broader distribution of Cu than Sm was found in the cell boundary of the quenched Sample. High resolution STEM-HAADF results showed SmCo5/Sm2Co17 interface is sharp and defect free for the slowly Cooled Sample while it is rough and zigzag shaped for the quenched Sample. Diffused Cu into the matrix phase from the cell boundary results in a gradual increase of magnetocrystalline anisotropy form matrix to the cell boundary phase. Large Fe concentration in the cell boundary phase reduces its magnetocrystalline anisotropy. Micromagnetic simulations showed that these microstructural features of the quenched Sample cause a weak pinning strength of the cell boundary phase explaining its low coercivity.
-
Correlation of microchemistry of cell boundary phase and interface structure to the coercivity of Sm(Co0.784Fe0.100Cu0.088Zr0.028)7.19 sintered magnets
Acta Materialia, 2017Co-Authors: H. Sepehri-amin, J. Thielsch, Johann Fischbacher, Tadakatsu Ohkubo, Thomas Schrefl, Oliver Gutfleisch, Kazuhiro HonoAbstract:We revisited the microstructure of Sm2Co17-type sintered magnets to understand the underlying mechanism of substantial decrease of coercivity from 2.56 T for the optimally annealed Sample to 0.14 T for the Sample re-annealed at aging temperature of 850 °C for just 1 min and quenched (quenched Sample). This low coercivity can be recovered by annealing of the magnet at 850 °C, slow cooling to 400 °C followed by quenching (slowly Cooled Sample) and with this is fully reversible between the two states. Magnetic domain observations of thermally demagnetized Samples with c-axis out-of-plane showed an ultra-fine maze-like domain pattern comparable to the cell size in the slowly Cooled Sample. However, annealing at 850 °C, even for a short time, followed by quenching resulted in a substantial increase in the size of maze-like domain pattern. Microchemistry of the SmCo5 cell boundary phase for two Samples was analyzed using 3D atom probe. 8.6 at. % Cu and 7.7 at. % Fe was found in the cell boundary of the quenched Sample while the SmCo5 cell boundary phase of the slowly Cooled Sample contains 15.4 at. % Cu and 3.0 at. % Fe. Unlike the slowly Cooled Sample, a broader distribution of Cu than Sm was found in the cell boundary of the quenched Sample. High resolution STEM-HAADF results showed SmCo5/Sm2Co17 interface is sharp and defect free for the slowly Cooled Sample while it is rough and zigzag shaped for the quenched Sample. Diffused Cu into the matrix phase from the cell boundary results in a gradual increase of magnetocrystalline anisotropy form matrix to the cell boundary phase. Large Fe concentration in the cell boundary phase reduces its magnetocrystalline anisotropy. Micromagnetic simulations showed that these microstructural features of the quenched Sample cause a weak pinning strength of the cell boundary phase explaining its low coercivity.