The Experts below are selected from a list of 10110 Experts worldwide ranked by ideXlab platform

Dominique Lesselier - One of the best experts on this subject based on the ideXlab platform.

  • shape inversion from tm and te real data by controlled evolution of level sets
    Inverse Problems, 2001
    Co-Authors: Christophe Ramananjaona, Marc Lambert, Dominique Lesselier
    Abstract:

    The retrieval of the Cross-Sectional Contour of a homogeneous, multiply connected cylindrical obstacle located in free space is performed via controlled evolution of a level set from experimental data in either the transverse magnetic (TM) or transverse electric (TE) polarization case as is described in the introductory paper of the special section. Theoretical and algorithmic details on the solution method are found in Ramananjaona et al (2001 Inverse Problems 17 1087–111) for the buried object configuration—the free-space configuration is a straightforward simplification—and only key elements are recalled here. Focus is on the display and discussion of shape identification results for the two dielectric circular cylinders (TM data), the rectangularly shaped metal cylinder (TM and TE data), and the U-shaped metal cylinder (TM data). In addition to the fact that TE data are often seen as more of a challenge that TM data, those cases appear to be the most demanding ones in the microwave data base in terms of geometry (the U-shaped one) or in view of the inversion algorithm itself (developed for penetrable objects, the metal case is in principle off limits) whilst the two cylinders illustrate how multiply connected, dielectric objects are retrieved.

  • shape reconstruction of buried obstacles by controlled evolution of a level set from a min max formulation to numerical experimentation
    Inverse Problems, 2001
    Co-Authors: Christophe Ramananjaona, Marc Lambert, Dominique Lesselier, Jeanpaul Zolesio
    Abstract:

    The nonlinearized reconstruction of the Cross-Sectional Contour of a homogeneous, possibly multiply connected obstacle buried in a half-space from time-harmonic wave field data collected above this half-space in both transverse magnetic (TM) and transverse electric (TE) polarization cases is investigated. The reconstruction is performed via controlled evolution of a level set that was pioneered by Litman et al (Litman A, Lesselier D and Santosa F 1998 Inverse Problems 14 685-706) but at this time restricted to free space for TM data collected all around the sought obstacle. The main novelty of the investigation lies in the following points: from the rigorous contrast-source domain integral formulation (TM) and integral-differential formulation (TE) of the direct scattering problems in the buried obstacle configuration, and from appropriately cast adjoint scattering problems, we demonstrate, by processing min-max formulations of an objective functional J made of the data error to be minimized, that its derivatives with respect to the evolution time t are given in closed form. They are Contour integrals involving the normal component of the velocity field of evolution times the product of direct and adjoint fields (TM), or of the scalar product of gradients of such fields (TE) at t. This approach only calls for the analysis of the well posed direct and adjoint scattering problems formulated from the TM and TE Green systems of the unperturbed layered environment and, unusually, it avoids the differentiation of state fields. Other contributions of the paper come from exhibiting and analysing via comprehensive numerical experimentation how and under which conditions evolutions of level sets involving velocities opposite to shape gradients perform in demanding configurations including two disjoint obstacles, constitutive materials strongly less or more refractive than the embedding material, aspect-limited and noisy monochromatic data, in the severe TE case as well as in the more menial TM case. A comparison with a binary-specialized modified-gradient solution method is also led for several, more and more lossy embedding half-spaces. Rules of thumb for effectiveness of the inversions and pending theoretical and computational questions are outlined in conclusion.

Christophe Ramananjaona - One of the best experts on this subject based on the ideXlab platform.

  • shape inversion from tm and te real data by controlled evolution of level sets
    Inverse Problems, 2001
    Co-Authors: Christophe Ramananjaona, Marc Lambert, Dominique Lesselier
    Abstract:

    The retrieval of the Cross-Sectional Contour of a homogeneous, multiply connected cylindrical obstacle located in free space is performed via controlled evolution of a level set from experimental data in either the transverse magnetic (TM) or transverse electric (TE) polarization case as is described in the introductory paper of the special section. Theoretical and algorithmic details on the solution method are found in Ramananjaona et al (2001 Inverse Problems 17 1087–111) for the buried object configuration—the free-space configuration is a straightforward simplification—and only key elements are recalled here. Focus is on the display and discussion of shape identification results for the two dielectric circular cylinders (TM data), the rectangularly shaped metal cylinder (TM and TE data), and the U-shaped metal cylinder (TM data). In addition to the fact that TE data are often seen as more of a challenge that TM data, those cases appear to be the most demanding ones in the microwave data base in terms of geometry (the U-shaped one) or in view of the inversion algorithm itself (developed for penetrable objects, the metal case is in principle off limits) whilst the two cylinders illustrate how multiply connected, dielectric objects are retrieved.

  • shape reconstruction of buried obstacles by controlled evolution of a level set from a min max formulation to numerical experimentation
    Inverse Problems, 2001
    Co-Authors: Christophe Ramananjaona, Marc Lambert, Dominique Lesselier, Jeanpaul Zolesio
    Abstract:

    The nonlinearized reconstruction of the Cross-Sectional Contour of a homogeneous, possibly multiply connected obstacle buried in a half-space from time-harmonic wave field data collected above this half-space in both transverse magnetic (TM) and transverse electric (TE) polarization cases is investigated. The reconstruction is performed via controlled evolution of a level set that was pioneered by Litman et al (Litman A, Lesselier D and Santosa F 1998 Inverse Problems 14 685-706) but at this time restricted to free space for TM data collected all around the sought obstacle. The main novelty of the investigation lies in the following points: from the rigorous contrast-source domain integral formulation (TM) and integral-differential formulation (TE) of the direct scattering problems in the buried obstacle configuration, and from appropriately cast adjoint scattering problems, we demonstrate, by processing min-max formulations of an objective functional J made of the data error to be minimized, that its derivatives with respect to the evolution time t are given in closed form. They are Contour integrals involving the normal component of the velocity field of evolution times the product of direct and adjoint fields (TM), or of the scalar product of gradients of such fields (TE) at t. This approach only calls for the analysis of the well posed direct and adjoint scattering problems formulated from the TM and TE Green systems of the unperturbed layered environment and, unusually, it avoids the differentiation of state fields. Other contributions of the paper come from exhibiting and analysing via comprehensive numerical experimentation how and under which conditions evolutions of level sets involving velocities opposite to shape gradients perform in demanding configurations including two disjoint obstacles, constitutive materials strongly less or more refractive than the embedding material, aspect-limited and noisy monochromatic data, in the severe TE case as well as in the more menial TM case. A comparison with a binary-specialized modified-gradient solution method is also led for several, more and more lossy embedding half-spaces. Rules of thumb for effectiveness of the inversions and pending theoretical and computational questions are outlined in conclusion.

Akhunov R.r. - One of the best experts on this subject based on the ideXlab platform.

  • Estimation of the heterogeneity of the reservoir fluid inflow to the Cross-Sectional Contour of a vertical well
    2020
    Co-Authors: Potashev K.a., Akhunov R.r.
    Abstract:

    © 2020, Kazan Federal University. All rights reserved. The reasons for the heterogeneity of the reservoir fluid inflow to the Cross-Sectional Contour of a vertical well can be: a) asymmetry of the external pressure field relative to the well axis as a result of the interference of the surrounding wells; b) heterogeneity of the permeability field near the well, which is a consequence of either the heterogeneity of the absolute permeability field of the reservoir or the mobility function of the multiphase mixture of formation fluids. To simulate filtration in a reservoir over a relatively long time interval, the main interest is constant or long-term factors associated with well spacing and the distribution of absolute permeability. In the work, solutions of two model problems were constructed, which allow a quantitative evaluation of the influence of both factors on the degree of inhomogeneity of the inflow to the well and indicate the conditions under which this effect becomes significant. The obtained estimates are intended primarily for computational schemes of streamline and streamtube methods, which require a high degree of solution detailing near wells

Marc Lambert - One of the best experts on this subject based on the ideXlab platform.

  • shape inversion from tm and te real data by controlled evolution of level sets
    Inverse Problems, 2001
    Co-Authors: Christophe Ramananjaona, Marc Lambert, Dominique Lesselier
    Abstract:

    The retrieval of the Cross-Sectional Contour of a homogeneous, multiply connected cylindrical obstacle located in free space is performed via controlled evolution of a level set from experimental data in either the transverse magnetic (TM) or transverse electric (TE) polarization case as is described in the introductory paper of the special section. Theoretical and algorithmic details on the solution method are found in Ramananjaona et al (2001 Inverse Problems 17 1087–111) for the buried object configuration—the free-space configuration is a straightforward simplification—and only key elements are recalled here. Focus is on the display and discussion of shape identification results for the two dielectric circular cylinders (TM data), the rectangularly shaped metal cylinder (TM and TE data), and the U-shaped metal cylinder (TM data). In addition to the fact that TE data are often seen as more of a challenge that TM data, those cases appear to be the most demanding ones in the microwave data base in terms of geometry (the U-shaped one) or in view of the inversion algorithm itself (developed for penetrable objects, the metal case is in principle off limits) whilst the two cylinders illustrate how multiply connected, dielectric objects are retrieved.

  • shape reconstruction of buried obstacles by controlled evolution of a level set from a min max formulation to numerical experimentation
    Inverse Problems, 2001
    Co-Authors: Christophe Ramananjaona, Marc Lambert, Dominique Lesselier, Jeanpaul Zolesio
    Abstract:

    The nonlinearized reconstruction of the Cross-Sectional Contour of a homogeneous, possibly multiply connected obstacle buried in a half-space from time-harmonic wave field data collected above this half-space in both transverse magnetic (TM) and transverse electric (TE) polarization cases is investigated. The reconstruction is performed via controlled evolution of a level set that was pioneered by Litman et al (Litman A, Lesselier D and Santosa F 1998 Inverse Problems 14 685-706) but at this time restricted to free space for TM data collected all around the sought obstacle. The main novelty of the investigation lies in the following points: from the rigorous contrast-source domain integral formulation (TM) and integral-differential formulation (TE) of the direct scattering problems in the buried obstacle configuration, and from appropriately cast adjoint scattering problems, we demonstrate, by processing min-max formulations of an objective functional J made of the data error to be minimized, that its derivatives with respect to the evolution time t are given in closed form. They are Contour integrals involving the normal component of the velocity field of evolution times the product of direct and adjoint fields (TM), or of the scalar product of gradients of such fields (TE) at t. This approach only calls for the analysis of the well posed direct and adjoint scattering problems formulated from the TM and TE Green systems of the unperturbed layered environment and, unusually, it avoids the differentiation of state fields. Other contributions of the paper come from exhibiting and analysing via comprehensive numerical experimentation how and under which conditions evolutions of level sets involving velocities opposite to shape gradients perform in demanding configurations including two disjoint obstacles, constitutive materials strongly less or more refractive than the embedding material, aspect-limited and noisy monochromatic data, in the severe TE case as well as in the more menial TM case. A comparison with a binary-specialized modified-gradient solution method is also led for several, more and more lossy embedding half-spaces. Rules of thumb for effectiveness of the inversions and pending theoretical and computational questions are outlined in conclusion.

Potashev K.a. - One of the best experts on this subject based on the ideXlab platform.

  • Estimation of the heterogeneity of the reservoir fluid inflow to the Cross-Sectional Contour of a vertical well
    2020
    Co-Authors: Potashev K.a., Akhunov R.r.
    Abstract:

    © 2020, Kazan Federal University. All rights reserved. The reasons for the heterogeneity of the reservoir fluid inflow to the Cross-Sectional Contour of a vertical well can be: a) asymmetry of the external pressure field relative to the well axis as a result of the interference of the surrounding wells; b) heterogeneity of the permeability field near the well, which is a consequence of either the heterogeneity of the absolute permeability field of the reservoir or the mobility function of the multiphase mixture of formation fluids. To simulate filtration in a reservoir over a relatively long time interval, the main interest is constant or long-term factors associated with well spacing and the distribution of absolute permeability. In the work, solutions of two model problems were constructed, which allow a quantitative evaluation of the influence of both factors on the degree of inhomogeneity of the inflow to the well and indicate the conditions under which this effect becomes significant. The obtained estimates are intended primarily for computational schemes of streamline and streamtube methods, which require a high degree of solution detailing near wells