The Experts below are selected from a list of 5631 Experts worldwide ranked by ideXlab platform

Montavont Nicolas - One of the best experts on this subject based on the ideXlab platform.

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    International audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    National audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

Lagos Jenschke Tomas - One of the best experts on this subject based on the ideXlab platform.

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    International audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    National audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

Gregory D Sellman - One of the best experts on this subject based on the ideXlab platform.

  • detecting data transmission errors in an inter integrated circuit i2c system
    2012
    Co-Authors: Michael Decesaris, Steven C Jacobson, Luke D Remis, Gregory D Sellman
    Abstract:

    Detecting data transmission errors in an I2C system that includes a source Device, an Destination Device, and a signal line coupling the I2C source and Destination Device, including: receiving, by the I2C Destination Device from the I2C source Device, a data transmission signal, the data transmission signal encoded with a set of bits; detecting, by the I2C Destination Device, rise time of a preselected bit in the set of bits; if the detected rise time is less than a predefined threshold, determining that the I2C source Device injected a parity bit in the signal, and if the detected rise time is not less than the predefined threshold, determining that the I2C source Device did not inject a parity bit in the signal; and determining whether the data transmission signal includes an error in dependence upon the parity of the set of bits.

  • increasing data transmission rate in an inter integrated circuit i2c system
    2012
    Co-Authors: Michael Decesaris, Luke D Remis, Gregory D Sellman
    Abstract:

    Increasing data transmission rate in an I2C system that includes an I2C source Device and an Destination Device, the source Device coupled to the Destination Device through an SDL and SCL, including: receiving in parallel, by the Destination Device, an SDL data signal and an SCL data signal, the SCL data signal encoded with bits; and, for each bit of the SCL data signal: detecting rise time of the bit and determining, in dependence upon the detected rise time, whether the bit represents a first binary value or a second binary value including: determining that the bit represents a first binary value when the detected rise time is less than a predefined threshold; and determining that the bit represents a second binary value when the detected rise time is not less than the predefined threshold.

Papadopoulos Georgios - One of the best experts on this subject based on the ideXlab platform.

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    International audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    National audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

Koutsiamanis Remous-aris - One of the best experts on this subject based on the ideXlab platform.

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    International audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité

  • Stratégies d'ancêtre commun pour les réseaux RPL multi-chemins
    HAL CCSD, 2020
    Co-Authors: Lagos Jenschke Tomas, Papadopoulos Georgios, Koutsiamanis Remous-aris, Montavont Nicolas
    Abstract:

    National audienceThe IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) networks is designed for Internet of Things (IoT) networks to generate routes between Devices with minimal processing. This protocol creates a DODAG (Destination Oriented Directed Acyclic Graph) network topology through the use of DODAG Information Object (DIO) control packets. The DODAG routes the data packets upstream to the Destination Device. In order to obtain a reliable network, we implement Packet Replication and Elimination (PRE) to perform multi-path data transmission via multiple parent Devices. However, there is no standard way to select an alternative path. This document presents three types of Alternative Parent (AP) selection following a braided model. We focus on analyzing its performance in terms of delay and compromise between network traffic and reliability.Le protocole de routage IPv6 pour les réseaux à faible puissance et fort taux de pertes (RPL) est conçu pour les réseaux Internet des objets (IoT) afin de générer des itinéraires entre les appareils avec un traitement minimal. Ce protocole crée une topologie de réseau DODAG (Destination Oriented Directed Acyclic Graph) grâce à l'utilisation de paquets de contrôle DODAG Information Object (DIO). Le DODAG achemine les paquets de données en amont vers le périphérique de Destination. Afin d'obtenir un réseau fiable, nous implémentons la réplication et l'élimination des paquets (PRE) pour effectuer une transmission de données à chemins multiples via plusieurs périphériques parents. Cependant, il n'existe aucun moyen standard de sélectionner un chemin alternatif. Ce document présente trois types de sélection de parent alternatif (AP) suivant un modèle triangulaire. Nous nous concentrons sur l'analyse de ses performances en termes de retard et de compromis entre trafic réseau et fiabilité