The Experts below are selected from a list of 291 Experts worldwide ranked by ideXlab platform
Santos Otin - One of the best experts on this subject based on the ideXlab platform.
-
(Vapour + liquid) equilibria for the binary mixtures (1-propanol + Dibromomethane, or + bromochloromethane, or + 1,2-dichloroethane or + 1-bromo-2-chloroethane) at T = 313.15 K
The Journal of Chemical Thermodynamics, 2020Co-Authors: Vanesa Gil-hernandez, Santos Otin, Manuela Artal, Pilar García-giménez, Inmaculada VelascoAbstract:Abstract Isothermal (vapour + liquid) equilibria (VLE) at 313.15 K have been measured for liquid 1-propanol + Dibromomethane, or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of the 2nd molar virial coefficients. The excess molar Gibbs free energies of all the studied mixtures are positive and ranging from 794 J · mol−1 for (1-propanol + bromochloromethane) and 1052 J · mol−1 for (1-propanol + 1-bromo-2-chloroethane), at x = 0.5. The experimental results are compared with modified UNIFAC predictions.
-
vapour liquid equilibrium at t 308 15 k for binary systems Dibromomethane n heptane bromotrichloromethane n heptane bromotrichloromethane Dibromomethane bromotrichloromethane bromochloromethane and Dibromomethane bromochloromethane experimental data
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
Vapour–liquid equilibrium at T = 308.15 K for binary systems: Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane. E
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martínez-baños, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
excess molar volumes and speed of sound in bromotrichloromethane n heptane Dibromomethane n heptane bromotrichloromethane Dibromomethane and bromotrichloromethane bromochloromethane at temperatures from 293 15 to 313 15 k
Journal of Chemical & Engineering Data, 2013Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Clara Rivas, Santos OtinAbstract:Density and speed of sound of four binary mixtures bromotrichloromethane + n-heptane, Dibromomethane + n-heptane, bromotrichloromethane + Dibromomethane, and bromotrichloromethane + bromochloromethane were measured over the entire range of composition in the temperature range from T = 293.15 K to T = 313.15 K. Excess molar volumes and deviation in isentropic compressibility have been calculated from experimental measurements and fitted to a Redlich–Kister equation to derive binary coefficients and the standard deviation.
-
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
Journal of Chemical & Engineering Data, 2013Co-Authors: Lourdes Martínez-baños, Jose Munoz Embid, Clara Rivas, Santos OtinAbstract:Density and speed of sound of four binary mixtures bromotrichloromethane + n-heptane, Dibromomethane + n-heptane, bromotrichloromethane + Dibromomethane, and bromotrichloromethane + bromochloromethane were measured over the entire range of composition in the temperature range from T = 293.15 K to T = 313.15 K. Excess molar volumes and deviation in isentropic compressibility have been calculated from experimental measurements and fitted to a Redlich–Kister equation to derive binary coefficients and the standard deviation.
Manuela Artal - One of the best experts on this subject based on the ideXlab platform.
-
(Vapour + liquid) equilibria for the binary mixtures (1-propanol + Dibromomethane, or + bromochloromethane, or + 1,2-dichloroethane or + 1-bromo-2-chloroethane) at T = 313.15 K
The Journal of Chemical Thermodynamics, 2020Co-Authors: Vanesa Gil-hernandez, Santos Otin, Manuela Artal, Pilar García-giménez, Inmaculada VelascoAbstract:Abstract Isothermal (vapour + liquid) equilibria (VLE) at 313.15 K have been measured for liquid 1-propanol + Dibromomethane, or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of the 2nd molar virial coefficients. The excess molar Gibbs free energies of all the studied mixtures are positive and ranging from 794 J · mol−1 for (1-propanol + bromochloromethane) and 1052 J · mol−1 for (1-propanol + 1-bromo-2-chloroethane), at x = 0.5. The experimental results are compared with modified UNIFAC predictions.
-
vapour liquid equilibrium at t 308 15 k for binary systems Dibromomethane n heptane bromotrichloromethane n heptane bromotrichloromethane Dibromomethane bromotrichloromethane bromochloromethane and Dibromomethane bromochloromethane experimental data
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
Vapour–liquid equilibrium at T = 308.15 K for binary systems: Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane. E
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martínez-baños, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
vapour liquid equilibria for the binary mixtures 1 propanol Dibromomethane or bromochloromethane or 1 2 dichloroethane or 1 bromo 2 chloroethane at t 313 15 k
The Journal of Chemical Thermodynamics, 2005Co-Authors: Vanesa Gilhernandez, Santos Otin, Manuela Artal, Pilar Garciagimenez, Inmaculada VelascoAbstract:Abstract Isothermal (vapour + liquid) equilibria (VLE) at 313.15 K have been measured for liquid 1-propanol + Dibromomethane, or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of the 2nd molar virial coefficients. The excess molar Gibbs free energies of all the studied mixtures are positive and ranging from 794 J · mol−1 for (1-propanol + bromochloromethane) and 1052 J · mol−1 for (1-propanol + 1-bromo-2-chloroethane), at x = 0.5. The experimental results are compared with modified UNIFAC predictions.
-
isothermal vapor liquid equilibria of ethyl acetate Dibromomethane or bromochloromethane or 1 2 dichloroethane or 1 bromo 2 chloroethane at t 313 15 k
Journal of Chemical & Engineering Data, 2004Co-Authors: Pilar Garciagimenez, Jose Munoz Embid, Manuela Artal, Vanesa Gilhernandez, Santos OtinAbstract:Isothermal vapor−liquid equilibria (VLE) at 313.15 K have been measured for liquid ethyl acetate + Dibromomethane or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich−Kister equation by taking into consideration the vapor-phase nonideality in terms of the second molar virial coefficients, and the liquid activity coefficients were correlated by means of the Margules, van Laar, Wilson, NRTL, and UNIQUAC equations. The thermodynamic consistency of the experimental data was checked by means of the test of Van Ness et al. in the version of Fredenslund et al. The excess molar Gibbs energies of all of the studied mixtures are negative and range from −75 J mol-1 for ethyl acetate + 1-bromo-2-chloroethane to −300 J mol-1 for ethyl acetate + bromochloromethane at a mole fraction of x = 0.5.
Jose Munoz Embid - One of the best experts on this subject based on the ideXlab platform.
-
vapour liquid equilibrium at t 308 15 k for binary systems Dibromomethane n heptane bromotrichloromethane n heptane bromotrichloromethane Dibromomethane bromotrichloromethane bromochloromethane and Dibromomethane bromochloromethane experimental data
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
Vapour–liquid equilibrium at T = 308.15 K for binary systems: Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane. E
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martínez-baños, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
excess molar volumes and speed of sound in bromotrichloromethane n heptane Dibromomethane n heptane bromotrichloromethane Dibromomethane and bromotrichloromethane bromochloromethane at temperatures from 293 15 to 313 15 k
Journal of Chemical & Engineering Data, 2013Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Clara Rivas, Santos OtinAbstract:Density and speed of sound of four binary mixtures bromotrichloromethane + n-heptane, Dibromomethane + n-heptane, bromotrichloromethane + Dibromomethane, and bromotrichloromethane + bromochloromethane were measured over the entire range of composition in the temperature range from T = 293.15 K to T = 313.15 K. Excess molar volumes and deviation in isentropic compressibility have been calculated from experimental measurements and fitted to a Redlich–Kister equation to derive binary coefficients and the standard deviation.
-
Excess Molar Volumes and Speed of Sound in Bromotrichloromethane + n-Heptane, Dibromomethane + n-Heptane, Bromotrichloromethane + Dibromomethane, and Bromotrichloromethane + Bromochloromethane at Temperatures from (293.15 to 313.15) K
Journal of Chemical & Engineering Data, 2013Co-Authors: Lourdes Martínez-baños, Jose Munoz Embid, Clara Rivas, Santos OtinAbstract:Density and speed of sound of four binary mixtures bromotrichloromethane + n-heptane, Dibromomethane + n-heptane, bromotrichloromethane + Dibromomethane, and bromotrichloromethane + bromochloromethane were measured over the entire range of composition in the temperature range from T = 293.15 K to T = 313.15 K. Excess molar volumes and deviation in isentropic compressibility have been calculated from experimental measurements and fitted to a Redlich–Kister equation to derive binary coefficients and the standard deviation.
-
isothermal vapor liquid equilibria of ethyl acetate Dibromomethane or bromochloromethane or 1 2 dichloroethane or 1 bromo 2 chloroethane at t 313 15 k
Journal of Chemical & Engineering Data, 2004Co-Authors: Pilar Garciagimenez, Jose Munoz Embid, Manuela Artal, Vanesa Gilhernandez, Santos OtinAbstract:Isothermal vapor−liquid equilibria (VLE) at 313.15 K have been measured for liquid ethyl acetate + Dibromomethane or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich−Kister equation by taking into consideration the vapor-phase nonideality in terms of the second molar virial coefficients, and the liquid activity coefficients were correlated by means of the Margules, van Laar, Wilson, NRTL, and UNIQUAC equations. The thermodynamic consistency of the experimental data was checked by means of the test of Van Ness et al. in the version of Fredenslund et al. The excess molar Gibbs energies of all of the studied mixtures are negative and range from −75 J mol-1 for ethyl acetate + 1-bromo-2-chloroethane to −300 J mol-1 for ethyl acetate + bromochloromethane at a mole fraction of x = 0.5.
Inmaculada Velasco - One of the best experts on this subject based on the ideXlab platform.
-
(Vapour + liquid) equilibria for the binary mixtures (1-propanol + Dibromomethane, or + bromochloromethane, or + 1,2-dichloroethane or + 1-bromo-2-chloroethane) at T = 313.15 K
The Journal of Chemical Thermodynamics, 2020Co-Authors: Vanesa Gil-hernandez, Santos Otin, Manuela Artal, Pilar García-giménez, Inmaculada VelascoAbstract:Abstract Isothermal (vapour + liquid) equilibria (VLE) at 313.15 K have been measured for liquid 1-propanol + Dibromomethane, or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of the 2nd molar virial coefficients. The excess molar Gibbs free energies of all the studied mixtures are positive and ranging from 794 J · mol−1 for (1-propanol + bromochloromethane) and 1052 J · mol−1 for (1-propanol + 1-bromo-2-chloroethane), at x = 0.5. The experimental results are compared with modified UNIFAC predictions.
-
vapour liquid equilibria for the binary mixtures 1 propanol Dibromomethane or bromochloromethane or 1 2 dichloroethane or 1 bromo 2 chloroethane at t 313 15 k
The Journal of Chemical Thermodynamics, 2005Co-Authors: Vanesa Gilhernandez, Santos Otin, Manuela Artal, Pilar Garciagimenez, Inmaculada VelascoAbstract:Abstract Isothermal (vapour + liquid) equilibria (VLE) at 313.15 K have been measured for liquid 1-propanol + Dibromomethane, or + bromochloromethane or + 1,2-dichloroethane or + 1-bromo-2-chloroethane mixtures. The VLE data were reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of the 2nd molar virial coefficients. The excess molar Gibbs free energies of all the studied mixtures are positive and ranging from 794 J · mol−1 for (1-propanol + bromochloromethane) and 1052 J · mol−1 for (1-propanol + 1-bromo-2-chloroethane), at x = 0.5. The experimental results are compared with modified UNIFAC predictions.
Lourdes Martinezbanos - One of the best experts on this subject based on the ideXlab platform.
-
vapour liquid equilibrium at t 308 15 k for binary systems Dibromomethane n heptane bromotrichloromethane n heptane bromotrichloromethane Dibromomethane bromotrichloromethane bromochloromethane and Dibromomethane bromochloromethane experimental data
Fluid Phase Equilibria, 2015Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Santos Otin, Manuela ArtalAbstract:Abstract In this paper, the isothermal vapour–liquid equilibrium (VLE) at T = 308.15 K have been measured for liquid binary systems Dibromomethane + n-heptane, bromotrichloromethane + n-heptane, bromotrichloromethane + Dibromomethane, bromotrichloromethane + bromochloromethane and Dibromomethane + bromochloromethane by a dynamic method. The VLE data have been reduced using the Redlich–Kister equation taking into consideration the vapour phase imperfection in terms of 2nd molar virial coefficients and molar excess Gibbs energies, G m E , have been calculated. The experimental G m E is positive for all systems presenting the greatest value for Dibromomethane + n-heptane and a negligible value for Dibromomethane + bromochloromethane system. From our experimental data and those reported in the literature, phase and volumetric behaviour of the binary systems containing Dibromomethane, bromochloromethane, bromotrichloromethane or n-heptane have been modelled. Two equations of state, EoS, of different formulation have been used obtaining a good agreement for all systems. The mean relative deviations for the studied properties are MRD (P) = 1.57%, AAD (y) = 0.0116 and MRD (ρ) = 0.55% for Peng–Robinson EoS, and MRD (P) = 1.20%, AAD (y) = 0.0093 and MRD (ρ) = 0.38% for PC-SAFT EoS.
-
excess molar volumes and speed of sound in bromotrichloromethane n heptane Dibromomethane n heptane bromotrichloromethane Dibromomethane and bromotrichloromethane bromochloromethane at temperatures from 293 15 to 313 15 k
Journal of Chemical & Engineering Data, 2013Co-Authors: Lourdes Martinezbanos, Jose Munoz Embid, Clara Rivas, Santos OtinAbstract:Density and speed of sound of four binary mixtures bromotrichloromethane + n-heptane, Dibromomethane + n-heptane, bromotrichloromethane + Dibromomethane, and bromotrichloromethane + bromochloromethane were measured over the entire range of composition in the temperature range from T = 293.15 K to T = 313.15 K. Excess molar volumes and deviation in isentropic compressibility have been calculated from experimental measurements and fitted to a Redlich–Kister equation to derive binary coefficients and the standard deviation.