The Experts below are selected from a list of 73767 Experts worldwide ranked by ideXlab platform
Agnato, Osma Roberto - One of the best experts on this subject based on the ideXlab platform.
-
Estudo de juntas metal-ceramicas brasadas com metal ativo para aplicações em ultra-alto vacuo
[s.n.], 2018Co-Authors: Agnato, Osma RobertoAbstract:Orientador: Cecilia A. Zavaglia, Maurizio FerranteDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia MecanicaResumo: Os objetivos deste trabalho envolvem o estudo de diversas condições de brasagem metal-cerâmica, utilizando o processo de metal ativo, caracterizar as junções obtidas através de ensaios de cisalhamento, fadiga térmica, estanqueldade sob vácuo e observações macro e microestruturais (MEV). A combinação de materiais metálicos e cerâmicos é muito utilizada na indústria moderna em aplicações estruturais e na indústria eletro-eletrônica. O interesse nestas combinações se dá porque as cerâmicas apresentam grande estabilidade química, refratariedade, resistência ao desgaste e às suas características elétricas e opto eletrônicas. Os metais são utilizados principalmente devido às suas características mecânicas. A grande dificuldade da união entre os metais e os materiais cerâmicos reside no fato que eles possuem propriedades físicas, químicas e mecânicas muito diferentes, mas utilizando-se ligas metálicas com coeficiente de expansão térmica controlado como metal base, juntamente com ligas metálicas com elementos muito reativos, como o Ti, torna-se possível a junção entre classes de materiais tão distintos. O titânio reage. com oxigênio do óxido metálico (AI203), promovendo o molhamento da cerâmica pelo metal, produzindo compostos complexos na intertace responsáveis pela ligação. Os corpos de prova toram compostos por 1 peças cerâmica de alta alumina (99%), Kovar A ou molibdênio ou cobre e pelo metal de adição Ag-Cu- Ti 68,8%-26,7%; 4,5%. As brasagens foram realizadas em torno à vácuo sob diferentes condições de temperatura (860°C, 870°C e 880°C), tempo (10, 20 e 30 minutos) e metal base, posteriormente submetidas a ensaios de cisalhamento, fadiga térmica em três condições e observações ao microscópio eletrônico de varredura. Os resultados dos ensaios de cisalhamento forneceram uma idéia da resistência das junções, apresentando valores comparáveis com a literatura. Os ensaios de fadiga térmica indicam que as junções Kovar-alumina e cobre-alumina suportam bem a solicitações cíclicas moderadas (400°C e resfriamento ao ar). As observações macro e micro estruturais apresentaram resultados esperados, compatíveis com a literatura, quanto a composição e morfologia das fases observadas nas junções. São apresentadas sugestões para novos trabalhos, como a utilização de ensaios de tlexão em 4 pontos para caracterização mecânica e um estudo na microestrutura das juntas submetidas após fadiga térmicaAbstract: The objectives of this work are the study of various metal-ceramic welding conditions, utilizing the active-metal process, characterization of the joints obtained by shearing tests, thermal fatigue, leakage under vacuum, macro and micro structural observations (MEV). The combination of metallic and ceramic materiaIs is very utilized by modem industry in structural applications and by the electric/Electronic industry. The interest in these combinations is due to the fact that ceramics present great chemical inertia, refraction, resistence to wear and also due to their electric and optoelectric characteristics. Metais are used mainly because of their mechanical characteristics. The difficulty encountered in the joining of these two materiais is their lack of compatibility caused by these different properties. But, by brazing metais with a controlled thermal expansion coefficient and with metallic alloys containing highly reactive elements, metal ceramic joining is possible. Titanium reacts with the oxygen of the metallic oxide (AI203), causing the wetting of the ceramic by the metal, producing complex compositions in the interface, responsible for the joining. The samples were composed of one high-alumina ceramic piece (99%), Kovar A or molybidenium or copper and t>y the additive metal Ag-Cu-Ti (68,8% - 26,7% - 4,5%). The brazings were made ina vacuum oven under varied conditions ánd later submitted to shearing tests, thermal fatigue under three different conditions and observations by the Electronic Scanning microscope. The results of the shearing tests gave an idea of the joints' resistence, presenting values comparable with the literature. The thermal fatigue tests indicate that the Kovar alumina and copper-alumina tolerate the moderate cyclical solicitations well (400Q C and cooling at room temperature). The macro and micro structural observations presented the expected results, compatible with the literature. As for the comparison and morphology of the phases observed in the joints, suggestions are presented for new works, such as the utilization of flextion tests in 4 points for mechanical characterization and a study of the microstructure of the joints after submission to thermal fatigueMestradoMateriais e ProcessosMestre em Engenharia Mecânic
Osmar Roberto Agnato - One of the best experts on this subject based on the ideXlab platform.
-
Estudo de juntas metal-ceramicas brasadas com metal ativo para aplicações em ultra-alto vacuo
2017Co-Authors: Osmar Roberto AgnatoAbstract:Resumo: Os objetivos deste trabalho envolvem o estudo de diversas condições de brasagem metal-cerâmica, utilizando o processo de metal ativo, caracterizar as junções obtidas através de ensaios de cisalhamento, fadiga térmica, estanqueldade sob vácuo e observações macro e microestruturais (MEV). A combinação de materiais metálicos e cerâmicos é muito utilizada na indústria moderna em aplicações estruturais e na indústria eletro-eletrônica. O interesse nestas combinações se dá porque as cerâmicas apresentam grande estabilidade química, refratariedade, resistência ao desgaste e às suas características elétricas e opto eletrônicas. Os metais são utilizados principalmente devido às suas características mecânicas. A grande dificuldade da união entre os metais e os materiais cerâmicos reside no fato que eles possuem propriedades físicas, químicas e mecânicas muito diferentes, mas utilizando-se ligas metálicas com coeficiente de expansão térmica controlado como metal base, juntamente com ligas metálicas com elementos muito reativos, como o Ti, torna-se possível a junção entre classes de materiais tão distintos. O titânio reage. com oxigênio do óxido metálico (AI203), promovendo o molhamento da cerâmica pelo metal, produzindo compostos complexos na intertace responsáveis pela ligação. Os corpos de prova toram compostos por 1 peças cerâmica de alta alumina (99%), Kovar A ou molibdênio ou cobre e pelo metal de adição Ag-Cu- Ti 68,8%-26,7%; 4,5%. As brasagens foram realizadas em torno à vácuo sob diferentes condições de temperatura (860°C, 870°C e 880°C), tempo (10, 20 e 30 minutos) e metal base, posteriormente submetidas a ensaios de cisalhamento, fadiga térmica em três condições e observações ao microscópio eletrônico de varredura. Os resultados dos ensaios de cisalhamento forneceram uma idéia da resistência das junções, apresentando valores comparáveis com a literatura. Os ensaios de fadiga térmica indicam que as junções Kovar-alumina e cobre-alumina suportam bem a solicitações cíclicas moderadas (400°C e resfriamento ao ar). As observações macro e micro estruturais apresentaram resultados esperados, compatíveis com a literatura, quanto a composição e morfologia das fases observadas nas junções. São apresentadas sugestões para novos trabalhos, como a utilização de ensaios de tlexão em 4 pontos para caracterização mecânica e um estudo na microestrutura das juntas submetidas após fadiga térmicaAbstract: The objectives of this work are the study of various metal-ceramic welding conditions, utilizing the active-metal process, characterization of the joints obtained by shearing tests, thermal fatigue, leakage under vacuum, macro and micro structural observations (MEV). The combination of metallic and ceramic materiaIs is very utilized by modem industry in structural applications and by the electric/Electronic industry. The interest in these combinations is due to the fact that ceramics present great chemical inertia, refraction, resistence to wear and also due to their electric and optoelectric characteristics. Metais are used mainly because of their mechanical characteristics. The difficulty encountered in the joining of these two materiais is their lack of compatibility caused by these different properties. But, by brazing metais with a controlled thermal expansion coefficient and with metallic alloys containing highly reactive elements, metal ceramic joining is possible. Titanium reacts with the oxygen of the metallic oxide (AI203), causing the wetting of the ceramic by the metal, producing complex compositions in the interface, responsible for the joining. The samples were composed of one high-alumina ceramic piece (99%), Kovar A or molybidenium or copper and t>y the additive metal Ag-Cu-Ti (68,8% - 26,7% - 4,5%). The brazings were made ina vacuum oven under varied conditions ánd later submitted to shearing tests, thermal fatigue under three different conditions and observations by the Electronic Scanning microscope. The results of the shearing tests gave an idea of the joints' resistence, presenting values comparable with the literature. The thermal fatigue tests indicate that the Kovar alumina and copper-alumina tolerate the moderate cyclical solicitations well (400Q C and cooling at room temperature). The macro and micro structural observations presented the expected results, compatible with the literature. As for the comparison and morphology of the phases observed in the joints, suggestions are presented for new works, such as the utilization of flextion tests in 4 points for mechanical characterization and a study of the microstructure of the joints after submission to thermal fatigu
Sebastian M Torres - One of the best experts on this subject based on the ideXlab platform.
-
high temporal resolution capabilities of the national weather radar testbed phased array radar
Journal of Applied Meteorology and Climatology, 2011Co-Authors: Pamela L Heinselman, Sebastian M TorresAbstract:Abstract Since 2007 the advancement of the National Weather Radar Testbed Phased-Array Radar (NWRT PAR) hardware and software capabilities has been supporting the implementation of high-temporal-resolution (∼1 min) sampling. To achieve the increase in computational power and data archiving needs required for high-temporal-resolution sampling, the signal processor was upgraded to a scalable, Linux-based cluster with a distributed computing architecture. The development of Electronic adaptive Scanning, which can reduce update times by focusing data collection on significant weather, became possible through functionality added to the radar control interface and real-time controller. Signal processing techniques were implemented to address data quality issues, such as artifact removal and range-and-velocity ambiguity mitigation, absent from the NWRT PAR at its installation. The hardware and software advancements described above have made possible the development of conventional and Electronic Scanning capabil...
Tais Rondello - One of the best experts on this subject based on the ideXlab platform.
-
Occurence of Giadia spp. cysts, Cryptosporidium spp. oocysts and Ascarididae family eggs in sewage sludge samples
[s.n.], 2018Co-Authors: Tais RondelloAbstract:Orientador: Regina Maura Bueno FrancoDissertação (mestrado) - Universidade Estadual de Campinas. Instituto de BiologiaResumo: A presença dos protozoários patogênicos Giardia e Cryptosporidium tem sido comumente relatada em amostras de águas superficiais e esgoto que incluem os afluentes, efluentes e resíduos gerados do tratamento, como o lodo de esgoto. Tais parasitos são reconhecidos mundialmente como importantes agentes causadores de diarréia em humanos e animais e destacam-se pelo grande potencial de veiculação hídrica. Ascaris lumbricoides é um dos helmintos entéricos mais resistentes e geralmente usado como indicador parasitológico devido à sua grande capacidade de resistência ambiental. O lodo de esgoto (LE), resíduo originado do tratamento de esgoto pelo sistema de lodos ativados , tem gerado muitas discussões em relação à sua disposição final. No Brasil, atualmente, a quase totalidade do lodo produzido em estações de tratamento de esgoto (E.T.E.s) é destinada a aterros sanitários competindo por espaço com o lixo urbano. Outras alternativas são propostas, como o despejo em oceanos, rios e lagos e a incineração. A aplicação do LE em solos com a finalidade de fertilização representa a melhor alternativa de uso, pois tal resíduo apresenta elevado teor de matéria orgânica, vários nutrientes de interesse agrícola e age como corretivo da acidez do solo. O presente trabalho teve por objetivos: (1) vermcar a ocorrência de cistos de Giardia, oocistos de Cryptosporidium e ovos de Ascaris sp. em amostras de LE, provenientes da ETE. Samambaia, (2) investigar a aplicabilidade de duas metodologias de concentração de cistos e oocistos a este tipo de amostra, (3) , verificar os danos morfológicos de cistos mediante o emprego de microscopia eletrônica de varredura (M.EV) e (4) efetuar a investigação da viabilidade dos ovos de Ascads sp. eventualmente presentes nas amostras, mediante o uso do corante vital Azul Trypan. Cistos estiveram presentes em 50,0% das amostras e oocistos, em 8,3%, considerando-se os dois procedimentos empregados. A concentração de cistos variou de O a 4800 cistos/g e de oocistos, de O a 600 oocistos/g, o que representa risco potencial à contaminação do solo onde o LE será aplicado e, possivelmente, para lençóis freáticos ou outros corpos d'água. Para as amostras brutas, a melhor técnica para cistos foi a Homogeneização em Solução de Eluição e para as amostras artificialmente contaminadas, Centrífugo-concentração seguida de clarificação em éter. Os resultados discrepantes mostram a dificuldade de trabalhar oom esse tipo de amostra e a grande variabilidade de resultados. Fatores como temperatura, forças iônicas e, principalmente, o pH influenciaram na recuperação de cistos, oocistas e ovos. Foram verificadas alterações morfológícas mínimas nas paredes dos cistos mediante emprego da M.EV após 45 dias de exposição à luz sotar. Em relação aos helmintos, foram encontrados ovos de Toxocara sp, Ascaris sp e similares a Trichuris sp mediante emprego da técnica padronizada pela Norma Oficial Mexicana. O lodo de esgoto pode, portanto, conter grande quantidade e variedade de patógenos, o que ressalta a importância de um tratamento adequado, assim como a necessidade do desenvolvimento de técnicas apropriadas para a pesquisa de Giardia, Cryptosporidium e Ascaris neste tipo de amostra e a revisão da legislação em vigência que não contempla os protozoários em questãoAbstract: The presence of the pathogenic protozoan Giardia and Cryptosporidium has been commonly reported in superficial water and sewage samples, including affluent, effluent and residues generated trom the treatment, as the sewage sludge. Such parasites are recognized worldwide as important agents of diarrhea in humans and animais and have great potential of water transmission. Ascaris lumbricoides is one of the most resistant enteric pathogens and generally is used as a parasitological indicator due to its great environmental resistance. The sewage sludge (SS), residue originated from the activated sludge treatment system, has generated many discussions regarding its final disposat. In Brazil, nowadays, almost the total amount of sewage sludge produced in sewage treatment plants (S.T.P.s) is destined to sanitary landfitts competing forspace with the urban trash. Other alternatives are proposed, as the oceanic disposal as in rivers or lakes and incineration. The SS applicatron in soils with the purpose of fertilization presents the best altemative, therefore such residue contains elevated tenor of several organic matter nutrients of agricultural interest and acts like acidity corrective of the soil. The present work had for objectives: (1) verify the occurrence of Giardia cysts, Cryptosponalum oocysts and Ascarls sp. eggs in SS samples from Samambaia S.T.P., (2) investigate the applicability of two methodologies of cysts and oocysts concentration to this kind of sample, (3) verify the morphological injuries of cysts by means of the Electronic Scanning microcopy (ESM) and (4) verify the viability of the Ascarls sp. eggs occasionalty present in samples by means of Trypan Blue vital dye. Cysts were detected in 50,0% of the samples and oocysts, in 8,3%, considering both the procedures employed. The cysts concentration varied from O to 4800 cysts/g and of oocysts, from O to 600 oocysts/g, what represent the potential risk of contamination of the soil where the CSS will be applied and, possibly, for subterranean water supplies or others water bodies. For the raw samples, the best method for cysts detection was Homogenization in Elution Solution and for the artificially contaminated samples, Centrifuge-concentration foltowed by ether clarification. The discrepant results show the difficulty to work with this kind of sample and the great variability of results. Factors as temperature, ionic forces and, mainly, the pH, influenced on the cysts, oocysts and eggs recovery. Lower morphological alterations were verified on the cyst wall by means of ESM after 45 days of expositíon to the solar light. Regarding the helminths, Toxocara sp, Ascaris sp and similar to Trichuris sp eggs were found by means of the technique standardized by the Mexican Official Norm. The sewage sludge contains a great amount and variability of pathogens, what stands out the importance of an adequate treatment, as well as the need of development of suitable methods for the research of Giardia, Cryptosporidium and Ascaris ín this kind of sample and the law revísion that does not contemplates such protozoanMestradoMestre em Parasitologi
Tais Rondello Bonatti - One of the best experts on this subject based on the ideXlab platform.
-
Occurence of Giadia spp. cysts, Cryptosporidium spp. oocysts and Ascarididae family eggs in sewage sludge samples
2017Co-Authors: Tais Rondello BonattiAbstract:Resumo: A presença dos protozoários patogênicos Giardia e Cryptosporidium tem sido comumente relatada em amostras de águas superficiais e esgoto que incluem os afluentes, efluentes e resíduos gerados do tratamento, como o lodo de esgoto. Tais parasitos são reconhecidos mundialmente como importantes agentes causadores de diarréia em humanos e animais e destacam-se pelo grande potencial de veiculação hídrica. Ascaris lumbricoides é um dos helmintos entéricos mais resistentes e geralmente usado como indicador parasitológico devido à sua grande capacidade de resistência ambiental. O lodo de esgoto (LE), resíduo originado do tratamento de esgoto pelo sistema de lodos ativados , tem gerado muitas discussões em relação à sua disposição final. No Brasil, atualmente, a quase totalidade do lodo produzido em estações de tratamento de esgoto (E.T.E.s) é destinada a aterros sanitários competindo por espaço com o lixo urbano. Outras alternativas são propostas, como o despejo em oceanos, rios e lagos e a incineração. A aplicação do LE em solos com a finalidade de fertilização representa a melhor alternativa de uso, pois tal resíduo apresenta elevado teor de matéria orgânica, vários nutrientes de interesse agrícola e age como corretivo da acidez do solo. O presente trabalho teve por objetivos: (1) vermcar a ocorrência de cistos de Giardia, oocistos de Cryptosporidium e ovos de Ascaris sp. em amostras de LE, provenientes da ETE. Samambaia, (2) investigar a aplicabilidade de duas metodologias de concentração de cistos e oocistos a este tipo de amostra, (3) , verificar os danos morfológicos de cistos mediante o emprego de microscopia eletrônica de varredura (M.EV) e (4) efetuar a investigação da viabilidade dos ovos de Ascads sp. eventualmente presentes nas amostras, mediante o uso do corante vital Azul Trypan. Cistos estiveram presentes em 50,0% das amostras e oocistos, em 8,3%, considerando-se os dois procedimentos empregados. A concentração de cistos variou de O a 4800 cistos/g e de oocistos, de O a 600 oocistos/g, o que representa risco potencial à contaminação do solo onde o LE será aplicado e, possivelmente, para lençóis freáticos ou outros corpos d'água. Para as amostras brutas, a melhor técnica para cistos foi a Homogeneização em Solução de Eluição e para as amostras artificialmente contaminadas, Centrífugo-concentração seguida de clarificação em éter. Os resultados discrepantes mostram a dificuldade de trabalhar oom esse tipo de amostra e a grande variabilidade de resultados. Fatores como temperatura, forças iônicas e, principalmente, o pH influenciaram na recuperação de cistos, oocistas e ovos. Foram verificadas alterações morfológícas mínimas nas paredes dos cistos mediante emprego da M.EV após 45 dias de exposição à luz sotar. Em relação aos helmintos, foram encontrados ovos de Toxocara sp, Ascaris sp e similares a Trichuris sp mediante emprego da técnica padronizada pela Norma Oficial Mexicana. O lodo de esgoto pode, portanto, conter grande quantidade e variedade de patógenos, o que ressalta a importância de um tratamento adequado, assim como a necessidade do desenvolvimento de técnicas apropriadas para a pesquisa de Giardia, Cryptosporidium e Ascaris neste tipo de amostra e a revisão da legislação em vigência que não contempla os protozoários em questão ;;Abstract: The presence of the pathogenic protozoan Giardia and Cryptosporidium has been commonly reported in superficial water and sewage samples, including affluent, effluent and residues generated trom the treatment, as the sewage sludge. Such parasites are recognized worldwide as important agents of diarrhea in humans and animais and have great potential of water transmission. Ascaris lumbricoides is one of the most resistant enteric pathogens and generally is used as a parasitological indicator due to its great environmental resistance. The sewage sludge (SS), residue originated from the activated sludge treatment system, has generated many discussions regarding its final disposat. In Brazil, nowadays, almost the total amount of sewage sludge produced in sewage treatment plants (S.T.P.s) is destined to sanitary landfitts competing forspace with the urban trash. Other alternatives are proposed, as the oceanic disposal as in rivers or lakes and incineration. The SS applicatron in soils with the purpose of fertilization presents the best altemative, therefore such residue contains elevated tenor of several organic matter nutrients of agricultural interest and acts like acidity corrective of the soil. The present work had for objectives: (1) verify the occurrence of Giardia cysts, Cryptosponalum oocysts and Ascarls sp. eggs in SS samples from Samambaia S.T.P., (2) investigate the applicability of two methodologies of cysts and oocysts concentration to this kind of sample, (3) verify the morphological injuries of cysts by means of the Electronic Scanning microcopy (ESM) and (4) verify the viability of the Ascarls sp. eggs occasionalty present in samples by means of Trypan Blue vital dye. Cysts were detected in 50,0% of the samples and oocysts, in 8,3%, considering both the procedures employed. The cysts concentration varied from O to 4800 cysts/g and of oocysts, from O to 600 oocysts/g, what represent the potential risk of contamination of the soil where the CSS will be applied and, possibly, for subterranean water supplies or others water bodies. For the raw samples, the best method for cysts detection was Homogenization in Elution Solution and for the artificially contaminated samples, Centrifuge-concentration foltowed by ether clarification. The discrepant results show the difficulty to work with this kind of sample and the great variability of results. Factors as temperature, ionic forces and, mainly, the pH, influenced on the cysts, oocysts and eggs recovery. Lower morphological alterations were verified on the cyst wall by means of ESM after 45 days of expositíon to the solar light. Regarding the helminths, Toxocara sp, Ascaris sp and similar to Trichuris sp eggs were found by means of the technique standardized by the Mexican Official Norm. The sewage sludge contains a great amount and variability of pathogens, what stands out the importance of an adequate treatment, as well as the need of development of suitable methods for the research of Giardia, Cryptosporidium and Ascaris ín this kind of sample and the law revísion that does not contemplates such protozoa