The Experts below are selected from a list of 309 Experts worldwide ranked by ideXlab platform
Sun Baoguo - One of the best experts on this subject based on the ideXlab platform.
-
identification of volatile components in chinese sinkiang fermented camel milk using safe sde and hs spme gc ms
Food Chemistry, 2011Co-Authors: Li Ning, Zheng Fuping, Chen Haitao, Liu Siyuan, Gu Chen, Song Zhenyang, Sun BaoguoAbstract:Abstract The volatile components of Chinese Sinkiang fermented camel milk were isolated by solvent assisted flavour evaporation (SAFE), simultaneous distillation Extraction (SDE, dichloromethane and diethyl ether as solvent, respectively) and headspace solid-phase microExtraction (HS-SPME, CAR/PDMS, PDMS/DVB and DVB/CAR/PDMS Fibre Extraction, respectively) and analysed by GC/MS. A total of 133 volatile components were identified under 6 different conditions, including 30 esters, 20 acids, 18 saturated alcohols, 15 unsaturated aliphatic alcohols, 8 saturated ketones, 9 saturated aldehydes, 8 unsaturated aliphatic aldehydes, 6 furans, 5 sulphur-containing compounds, 5 ethers, 5 lactones, 3 other compounds, and 1 unsaturated aliphatic ketone. Three pretreatment methods were compared, assisted by principal component analysis (PCA). The results indicated that the volatile components obtained using different methods varied greatly both in categories and in content, and therefore, a multi-pretreatment method should be adopted together with GC/MS. A total of 71 aroma-active compounds were detected by gas chromatography-olfactometry (GC–O), among which 66 aroma-active compounds were found by SDE (60, dichloromethane as solvent; 24, diethyl ether as solvent), 26 by SAFE.
D L Majid - One of the best experts on this subject based on the ideXlab platform.
-
Extraction and preparation of bamboo Fibre reinforced composites
Materials & Design, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibre composites have been developed for the production of a variety of industrial products, with benefits including biodegradability and environmental protection. Bamboo Fibre materials have attracted broad attention as reinforcement polymer composites due to their environmental sustainability, mechanical properties, and recyclability, and they can be compared with glass Fibres. This review classifies and describes the various procedures that have been developed to extract Fibres from raw bamboo culm. There are three main types of procedures: mechanical, chemical and combined mechanical and chemical Extraction. Composite preparation from extracted bamboo Fibres and various thermal analysis methods are also classified and analysed. Many parameters affect the mechanical properties and composite characteristics of bamboo Fibres and bamboo composites, including Fibre Extraction methods, Fibre length, Fibre size, resin application, temperature, moisture content and composite preparation techniques. Mechanical Extraction methods are more eco-friendly than chemical methods, and steam explosion and chemical methods significantly affect the microstructure of bamboo Fibres. The development of bamboo Fibre-reinforced composites and interfacial adhesion fabrication techniques must consider the type of matrix, the microstructure of bamboo and Fibre Extraction methods.
-
Bamboo Fibre Extraction and Its Reinforced Polymer Composite Material
International Journal of Chemical Biomolecular Metallurgical Materials Science and Engineering, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibres reinforced polymeric composite materials have been used in many fields of our lives to save the environment. Especially, bamboo Fibres due to its environmental sustainability, mechanical properties, and recyclability have been utilized as reinforced polymer matrix composite in construction\nindustries. In this review study bamboo structure and three different methods such as mechanical, chemical and combination of mechanical and chemical to extract Fibres from bamboo are summarized. Each Extraction method has been done base on the application of bamboo. In addition Bamboo Fibre is compared with glass Fibre from various aspects and in some parts it has advantages over the glass Fibre.
P Zakikhani - One of the best experts on this subject based on the ideXlab platform.
-
Extraction and preparation of bamboo Fibre reinforced composites
Materials & Design, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibre composites have been developed for the production of a variety of industrial products, with benefits including biodegradability and environmental protection. Bamboo Fibre materials have attracted broad attention as reinforcement polymer composites due to their environmental sustainability, mechanical properties, and recyclability, and they can be compared with glass Fibres. This review classifies and describes the various procedures that have been developed to extract Fibres from raw bamboo culm. There are three main types of procedures: mechanical, chemical and combined mechanical and chemical Extraction. Composite preparation from extracted bamboo Fibres and various thermal analysis methods are also classified and analysed. Many parameters affect the mechanical properties and composite characteristics of bamboo Fibres and bamboo composites, including Fibre Extraction methods, Fibre length, Fibre size, resin application, temperature, moisture content and composite preparation techniques. Mechanical Extraction methods are more eco-friendly than chemical methods, and steam explosion and chemical methods significantly affect the microstructure of bamboo Fibres. The development of bamboo Fibre-reinforced composites and interfacial adhesion fabrication techniques must consider the type of matrix, the microstructure of bamboo and Fibre Extraction methods.
-
Bamboo Fibre Extraction and Its Reinforced Polymer Composite Material
International Journal of Chemical Biomolecular Metallurgical Materials Science and Engineering, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibres reinforced polymeric composite materials have been used in many fields of our lives to save the environment. Especially, bamboo Fibres due to its environmental sustainability, mechanical properties, and recyclability have been utilized as reinforced polymer matrix composite in construction\nindustries. In this review study bamboo structure and three different methods such as mechanical, chemical and combination of mechanical and chemical to extract Fibres from bamboo are summarized. Each Extraction method has been done base on the application of bamboo. In addition Bamboo Fibre is compared with glass Fibre from various aspects and in some parts it has advantages over the glass Fibre.
Rizal Zahari - One of the best experts on this subject based on the ideXlab platform.
-
Extraction and preparation of bamboo Fibre reinforced composites
Materials & Design, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibre composites have been developed for the production of a variety of industrial products, with benefits including biodegradability and environmental protection. Bamboo Fibre materials have attracted broad attention as reinforcement polymer composites due to their environmental sustainability, mechanical properties, and recyclability, and they can be compared with glass Fibres. This review classifies and describes the various procedures that have been developed to extract Fibres from raw bamboo culm. There are three main types of procedures: mechanical, chemical and combined mechanical and chemical Extraction. Composite preparation from extracted bamboo Fibres and various thermal analysis methods are also classified and analysed. Many parameters affect the mechanical properties and composite characteristics of bamboo Fibres and bamboo composites, including Fibre Extraction methods, Fibre length, Fibre size, resin application, temperature, moisture content and composite preparation techniques. Mechanical Extraction methods are more eco-friendly than chemical methods, and steam explosion and chemical methods significantly affect the microstructure of bamboo Fibres. The development of bamboo Fibre-reinforced composites and interfacial adhesion fabrication techniques must consider the type of matrix, the microstructure of bamboo and Fibre Extraction methods.
-
Bamboo Fibre Extraction and Its Reinforced Polymer Composite Material
International Journal of Chemical Biomolecular Metallurgical Materials Science and Engineering, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibres reinforced polymeric composite materials have been used in many fields of our lives to save the environment. Especially, bamboo Fibres due to its environmental sustainability, mechanical properties, and recyclability have been utilized as reinforced polymer matrix composite in construction\nindustries. In this review study bamboo structure and three different methods such as mechanical, chemical and combination of mechanical and chemical to extract Fibres from bamboo are summarized. Each Extraction method has been done base on the application of bamboo. In addition Bamboo Fibre is compared with glass Fibre from various aspects and in some parts it has advantages over the glass Fibre.
Mohamed Thariq Hameed Sultan - One of the best experts on this subject based on the ideXlab platform.
-
Extraction and preparation of bamboo Fibre reinforced composites
Materials & Design, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibre composites have been developed for the production of a variety of industrial products, with benefits including biodegradability and environmental protection. Bamboo Fibre materials have attracted broad attention as reinforcement polymer composites due to their environmental sustainability, mechanical properties, and recyclability, and they can be compared with glass Fibres. This review classifies and describes the various procedures that have been developed to extract Fibres from raw bamboo culm. There are three main types of procedures: mechanical, chemical and combined mechanical and chemical Extraction. Composite preparation from extracted bamboo Fibres and various thermal analysis methods are also classified and analysed. Many parameters affect the mechanical properties and composite characteristics of bamboo Fibres and bamboo composites, including Fibre Extraction methods, Fibre length, Fibre size, resin application, temperature, moisture content and composite preparation techniques. Mechanical Extraction methods are more eco-friendly than chemical methods, and steam explosion and chemical methods significantly affect the microstructure of bamboo Fibres. The development of bamboo Fibre-reinforced composites and interfacial adhesion fabrication techniques must consider the type of matrix, the microstructure of bamboo and Fibre Extraction methods.
-
Bamboo Fibre Extraction and Its Reinforced Polymer Composite Material
International Journal of Chemical Biomolecular Metallurgical Materials Science and Engineering, 2014Co-Authors: P Zakikhani, Rizal Zahari, Mohamed Thariq Hameed Sultan, D L MajidAbstract:Natural plant Fibres reinforced polymeric composite materials have been used in many fields of our lives to save the environment. Especially, bamboo Fibres due to its environmental sustainability, mechanical properties, and recyclability have been utilized as reinforced polymer matrix composite in construction\nindustries. In this review study bamboo structure and three different methods such as mechanical, chemical and combination of mechanical and chemical to extract Fibres from bamboo are summarized. Each Extraction method has been done base on the application of bamboo. In addition Bamboo Fibre is compared with glass Fibre from various aspects and in some parts it has advantages over the glass Fibre.