Freudenberg

14,000,000 Leading Edge Experts on the ideXlab platform

Scan Science and Technology

Contact Leading Edge Experts & Companies

Scan Science and Technology

Contact Leading Edge Experts & Companies

The Experts below are selected from a list of 1068 Experts worldwide ranked by ideXlab platform

Andreas Reif - One of the best experts on this subject based on the ideXlab platform.

Urheim, Odne Stokke - One of the best experts on this subject based on the ideXlab platform.

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Ock Robe, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Urheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively

Shum A. D. - One of the best experts on this subject based on the ideXlab platform.

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Ock Robe, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Urheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Bock Robert, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Burheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively.acceptedVersion© 2018. This is the authors' accepted and refereed manuscript to the article. The final authenticated version is available online at: http://jes.ecsdl.org/content/165/7/F51

Zenyuk Iryna - One of the best experts on this subject based on the ideXlab platform.

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Ock Robe, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Urheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Bock Robert, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Burheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively.acceptedVersion© 2018. This is the authors' accepted and refereed manuscript to the article. The final authenticated version is available online at: http://jes.ecsdl.org/content/165/7/F51

Xiao X. - One of the best experts on this subject based on the ideXlab platform.

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Ock Robe, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Urheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively

  • Thermal Conductivity and Compaction of GDL-MPL Interfacial Composite Material
    Electrochemical Society, 2018
    Co-Authors: Bock Robert, Seland Frode, Shum A. D., Xiao X., Karoliusse Håvard, Zenyuk Iryna, Burheim, Odne Stokke
    Abstract:

    The microporous layer (MPL) and the gas diffusion layer (GDL) in a polymer electrolyte membrane (PEM) fuel cell assembly are often treated as separate layers in the literature. However, there exists a considerable third region where the two different materials merge in the coating process. This region has properties that differ from either of the materials that it consists of. Through-plane thermal conductivity and thickness variation under different compaction pressures were measured for such a composite region of two different commercial GDLs, Freudenberg H1410 and Toray Paper TGP-H-030, each treated with a custom-made MPL ink. Thermal conductivity at 15 bar compaction pressure for untreated Freudenberg H1410 GDL is 0.124 ± 0.009 W K-1 m−1 and for the custom-MPL-coated Freudenberg H1410 materials it was increased by the treatment to 0.141 ± 0.004 W K−1 m−1 and 0.145 ± 0.004 W K-1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively. For Toray paper TGP-H-030 the thermal conductivity at 15 bar compaction pressure for GDL only is 0.449 ± 0.009 W K−1 m−1 and for the custom-MPL-coated Toray TGP-H-030 materials it was decreased by the treatment to 0.39 ± 0.05 W K−1 m−1 and 0.39 ± 0.00 W K−1 m−1 for 9.9 wt% and 11.9 wt% ink, respectively.acceptedVersion© 2018. This is the authors' accepted and refereed manuscript to the article. The final authenticated version is available online at: http://jes.ecsdl.org/content/165/7/F51

Freudenberg - 15 days free trial to Access Experts & Abstracts