The Experts below are selected from a list of 21813 Experts worldwide ranked by ideXlab platform
Masayuki Machida - One of the best experts on this subject based on the ideXlab platform.
-
Fine De Novo Sequencing of a Fungal Genome Using only SOLiD Short Read Data: Verification on Aspergillus oryzae RIB40
PloS one, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of
-
fine de novo sequencing of a Fungal Genome using only solid short read data verification on aspergillus oryzae rib40
PLOS ONE, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of <60 bp have been considered to be too short for de novo Genome sequencing. Here, to investigate whether de novo sequencing of Fungal Genomes is possible using only SOLiD short read sequence data, we performed de novo assembly of the Aspergillus oryzae RIB40 Genome using only SOLiD read data of 50 bp generated from mate-paired libraries with 2.8- or 1.9-kb insert sizes. The assembled scaffolds showed an N50 value of 1.6 Mb, a 22-fold increase than those obtained using only SOLiD short read in other published reports. In addition, almost 99% of the reference Genome was accurately aligned by the assembled scaffold fragments in long lengths. The sequences of secondary metabolite biosynthetic genes and clusters, whose products are of considerable interest in Fungal studies due to their potential medicinal, agricultural, and cosmetic properties, were also highly reconstructed in the assembled scaffolds. Based on these findings, we concluded that de novo Genome sequencing using only SOLiD short reads is feasible and practical for molecular biological study of fungi. We also investigated the effect of filtering low quality data, library insert size, and k-mer size on the assembly performance, and recommend for the assembly use of mild filtered read data where the N50 was not so degraded and the library has an insert size of ∼2.0 kb, and k-mer size 33.
Itaru Takeda - One of the best experts on this subject based on the ideXlab platform.
-
Fine De Novo Sequencing of a Fungal Genome Using only SOLiD Short Read Data: Verification on Aspergillus oryzae RIB40
PloS one, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of
-
fine de novo sequencing of a Fungal Genome using only solid short read data verification on aspergillus oryzae rib40
PLOS ONE, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of <60 bp have been considered to be too short for de novo Genome sequencing. Here, to investigate whether de novo sequencing of Fungal Genomes is possible using only SOLiD short read sequence data, we performed de novo assembly of the Aspergillus oryzae RIB40 Genome using only SOLiD read data of 50 bp generated from mate-paired libraries with 2.8- or 1.9-kb insert sizes. The assembled scaffolds showed an N50 value of 1.6 Mb, a 22-fold increase than those obtained using only SOLiD short read in other published reports. In addition, almost 99% of the reference Genome was accurately aligned by the assembled scaffold fragments in long lengths. The sequences of secondary metabolite biosynthetic genes and clusters, whose products are of considerable interest in Fungal studies due to their potential medicinal, agricultural, and cosmetic properties, were also highly reconstructed in the assembled scaffolds. Based on these findings, we concluded that de novo Genome sequencing using only SOLiD short reads is feasible and practical for molecular biological study of fungi. We also investigated the effect of filtering low quality data, library insert size, and k-mer size on the assembly performance, and recommend for the assembly use of mild filtered read data where the N50 was not so degraded and the library has an insert size of ∼2.0 kb, and k-mer size 33.
Myco Umemura - One of the best experts on this subject based on the ideXlab platform.
-
Fine De Novo Sequencing of a Fungal Genome Using only SOLiD Short Read Data: Verification on Aspergillus oryzae RIB40
PloS one, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of
-
fine de novo sequencing of a Fungal Genome using only solid short read data verification on aspergillus oryzae rib40
PLOS ONE, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of <60 bp have been considered to be too short for de novo Genome sequencing. Here, to investigate whether de novo sequencing of Fungal Genomes is possible using only SOLiD short read sequence data, we performed de novo assembly of the Aspergillus oryzae RIB40 Genome using only SOLiD read data of 50 bp generated from mate-paired libraries with 2.8- or 1.9-kb insert sizes. The assembled scaffolds showed an N50 value of 1.6 Mb, a 22-fold increase than those obtained using only SOLiD short read in other published reports. In addition, almost 99% of the reference Genome was accurately aligned by the assembled scaffold fragments in long lengths. The sequences of secondary metabolite biosynthetic genes and clusters, whose products are of considerable interest in Fungal studies due to their potential medicinal, agricultural, and cosmetic properties, were also highly reconstructed in the assembled scaffolds. Based on these findings, we concluded that de novo Genome sequencing using only SOLiD short reads is feasible and practical for molecular biological study of fungi. We also investigated the effect of filtering low quality data, library insert size, and k-mer size on the assembly performance, and recommend for the assembly use of mild filtered read data where the N50 was not so degraded and the library has an insert size of ∼2.0 kb, and k-mer size 33.
Tsutomu Ikegami - One of the best experts on this subject based on the ideXlab platform.
-
Fine De Novo Sequencing of a Fungal Genome Using only SOLiD Short Read Data: Verification on Aspergillus oryzae RIB40
PloS one, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of
-
fine de novo sequencing of a Fungal Genome using only solid short read data verification on aspergillus oryzae rib40
PLOS ONE, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of <60 bp have been considered to be too short for de novo Genome sequencing. Here, to investigate whether de novo sequencing of Fungal Genomes is possible using only SOLiD short read sequence data, we performed de novo assembly of the Aspergillus oryzae RIB40 Genome using only SOLiD read data of 50 bp generated from mate-paired libraries with 2.8- or 1.9-kb insert sizes. The assembled scaffolds showed an N50 value of 1.6 Mb, a 22-fold increase than those obtained using only SOLiD short read in other published reports. In addition, almost 99% of the reference Genome was accurately aligned by the assembled scaffold fragments in long lengths. The sequences of secondary metabolite biosynthetic genes and clusters, whose products are of considerable interest in Fungal studies due to their potential medicinal, agricultural, and cosmetic properties, were also highly reconstructed in the assembled scaffolds. Based on these findings, we concluded that de novo Genome sequencing using only SOLiD short reads is feasible and practical for molecular biological study of fungi. We also investigated the effect of filtering low quality data, library insert size, and k-mer size on the assembly performance, and recommend for the assembly use of mild filtered read data where the N50 was not so degraded and the library has an insert size of ∼2.0 kb, and k-mer size 33.
Hideaki Koike - One of the best experts on this subject based on the ideXlab platform.
-
Fine De Novo Sequencing of a Fungal Genome Using only SOLiD Short Read Data: Verification on Aspergillus oryzae RIB40
PloS one, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of
-
fine de novo sequencing of a Fungal Genome using only solid short read data verification on aspergillus oryzae rib40
PLOS ONE, 2013Co-Authors: Myco Umemura, Yoshinori Koyama, Itaru Takeda, Hiroko Hagiwara, Tsutomu Ikegami, Hideaki Koike, Masayuki MachidaAbstract:The development of next-generation sequencing (NGS) technologies has dramatically increased the throughput, speed, and efficiency of Genome sequencing. The short read data generated from NGS platforms, such as SOLiD and Illumina, are quite useful for mapping analysis. However, the SOLiD read data with lengths of <60 bp have been considered to be too short for de novo Genome sequencing. Here, to investigate whether de novo sequencing of Fungal Genomes is possible using only SOLiD short read sequence data, we performed de novo assembly of the Aspergillus oryzae RIB40 Genome using only SOLiD read data of 50 bp generated from mate-paired libraries with 2.8- or 1.9-kb insert sizes. The assembled scaffolds showed an N50 value of 1.6 Mb, a 22-fold increase than those obtained using only SOLiD short read in other published reports. In addition, almost 99% of the reference Genome was accurately aligned by the assembled scaffold fragments in long lengths. The sequences of secondary metabolite biosynthetic genes and clusters, whose products are of considerable interest in Fungal studies due to their potential medicinal, agricultural, and cosmetic properties, were also highly reconstructed in the assembled scaffolds. Based on these findings, we concluded that de novo Genome sequencing using only SOLiD short reads is feasible and practical for molecular biological study of fungi. We also investigated the effect of filtering low quality data, library insert size, and k-mer size on the assembly performance, and recommend for the assembly use of mild filtered read data where the N50 was not so degraded and the library has an insert size of ∼2.0 kb, and k-mer size 33.
