The Experts below are selected from a list of 14073 Experts worldwide ranked by ideXlab platform

L. Gurioli - One of the best experts on this subject based on the ideXlab platform.

  • Pyroclastic flow hazard assessment at Somma–Vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

  • pyroclastic flow hazard assessment at somma vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

D. Andronico - One of the best experts on this subject based on the ideXlab platform.

  • Pyroclastic flow hazard assessment at Somma–Vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

  • pyroclastic flow hazard assessment at somma vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

Melanie J Leng - One of the best experts on this subject based on the ideXlab platform.

  • carbon isotope alteration during the thermal maturation of non flowering plant species representative of those found within the Geological Record
    Rapid Communications in Mass Spectrometry, 2017
    Co-Authors: Andrew C Smith, Christopher P Kendrick, Vicky Mosshayes, Christopher H Vane, Melanie J Leng
    Abstract:

    Rationale The carbon isotope (δ13C value) composition of fossil plant material is routinely used as a proxy of past climate and environment change. However, palaeoclimate interpretation requires assumptions about the stability of δ13C values in plant material during its decomposition and incorporation into sediments. Previous work on modern angiosperm species shows δ13C changes of several per mille during simulated decomposition experiments. However, no such tests have been undertaken on non-flowering plants, which are found extensively within the Geological Record. These plants have distinctly different cellulose-to-lignin ratios from those of their angiosperm counterparts, potentially creating hitherto unknown variations in the original to fossil δ13C signatures. Methods To test the extent of δ13C change during decomposition we have subjected a number of plants, representing more basal, non-flowering plant lineages (cycads, ferns, horsetails and dawn redwood), to artificial decay using a hydrothermal maturation technique at two temperatures over periods of up to 273 hours. Subsamples were extracted every 12–16 hours and analysed for their δ13C and %C values using a Carlo Erba 1500 elemental analyser, and VG TripleTrap and Optima mass spectrometers. Results The %C values increased for all samples through the maturation process at both temperatures with the largest increases observed within the first 24 hours. Decreases in δ13C values were observed for all plants at 300°C and for two of the species at the lower temperature (200°C). The maximum shift in the δ13C value related to experimental decomposition was −0.90‰ (horsetail), indicating a preferential loss of 13C during thermal maturation. Conclusions The reduction in the δ13C value potentially suggests a preferential loss of isotopically heavier cellulose in relation to the isotopically lighter lignin component during maturation. The isotopic offset observed here (<0.9‰) means that palaeoclimatic interpretation of δ13C values from non-flowering plant material within the Geological Record remains robust, but only where interpretations are based on variations in δ13C values greater than 1‰

  • Carbon isotope alteration during the thermal maturation of non-flowering plant species representative of those found within the Geological Record.
    Rapid Communications in Mass Spectrometry, 2016
    Co-Authors: Andrew C Smith, Christopher P Kendrick, Christopher H Vane, Vicky Moss-hayes, Melanie J Leng
    Abstract:

    Rationale The carbon isotope (δ13C value) composition of fossil plant material is routinely used as a proxy of past climate and environment change. However, palaeoclimate interpretation requires assumptions about the stability of δ13C values in plant material during its decomposition and incorporation into sediments. Previous work on modern angiosperm species shows δ13C changes of several per mille during simulated decomposition experiments. However, no such tests have been undertaken on non-flowering plants, which are found extensively within the Geological Record. These plants have distinctly different cellulose-to-lignin ratios from those of their angiosperm counterparts, potentially creating hitherto unknown variations in the original to fossil δ13C signatures. Methods To test the extent of δ13C change during decomposition we have subjected a number of plants, representing more basal, non-flowering plant lineages (cycads, ferns, horsetails and dawn redwood), to artificial decay using a hydrothermal maturation technique at two temperatures over periods of up to 273 hours. Subsamples were extracted every 12–16 hours and analysed for their δ13C and %C values using a Carlo Erba 1500 elemental analyser, and VG TripleTrap and Optima mass spectrometers. Results The %C values increased for all samples through the maturation process at both temperatures with the largest increases observed within the first 24 hours. Decreases in δ13C values were observed for all plants at 300°C and for two of the species at the lower temperature (200°C). The maximum shift in the δ13C value related to experimental decomposition was −0.90‰ (horsetail), indicating a preferential loss of 13C during thermal maturation. Conclusions The reduction in the δ13C value potentially suggests a preferential loss of isotopically heavier cellulose in relation to the isotopically lighter lignin component during maturation. The isotopic offset observed here (

R. Sulpizio - One of the best experts on this subject based on the ideXlab platform.

  • Pyroclastic flow hazard assessment at Somma–Vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

  • pyroclastic flow hazard assessment at somma vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

R. Cioni - One of the best experts on this subject based on the ideXlab platform.

  • Pyroclastic flow hazard assessment at Somma–Vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.

  • pyroclastic flow hazard assessment at somma vesuvius based on the Geological Record
    Bulletin of Volcanology, 2010
    Co-Authors: L. Gurioli, R. Sulpizio, R. Cioni, A. Sbrana, R. Santacroce, W. Luperini, D. Andronico
    Abstract:

    During the past 22 ka of activity at Somma–Vesuvius, catastrophic pyroclastic density currents (PDCs) have been generated repeatedly. Examples are those that destroyed the towns of Pompeii and Ercolano in AD 79, as well as Torre del Greco and several circum-Vesuvian villages in AD 1631. Using new field data and data available from the literature, we delineate the area impacted by PDCs at Somma–Vesuvius to improve the related hazard assessment. We mainly focus on the dispersal, thickness, and extent of the PDC deposits generated during seven plinian and sub-plinian eruptions, namely, the Pomici di Base, Greenish Pumice, Pomici di Mercato, Pomici di Avellino, Pompeii Pumice, AD 472 Pollena, and AD 1631 eruptions. We present maps of the total thickness of the PDC deposits for each eruption. Five out of seven eruptions dispersed PDCs radially, sometimes showing a preferred direction controlled by the position of the vent and the paleotopography. Only the PDCs from AD 1631 eruption were influenced by the presence of the Mt Somma caldera wall which stopped their advance in a northerly direction. Most PDC deposits are located downslope of the pronounced break-in slope that marks the base of the Somma–Vesuvius cone. PDCs from the Pomici di Avellino and Pompeii Pumice eruptions have the most dispersed deposits (extending more than 20 km from the inferred vent). These deposits are relatively thin, normally graded, and stratified. In contrast, thick, massive, lithic-rich deposits are only dispersed within 7 to 8 km of the vent. Isopach maps and the deposit features reveal that PDC dispersal was strongly controlled by the intensity of the eruption (in terms of magma discharge rate), the position of the vent area with respect to the Mt Somma caldera wall, and the pre-existing topography. Facies characteristics of the PDC deposits appear to correlate with dispersal; the stratified facies are consistently dispersed more widely than the massive facies.