The Experts below are selected from a list of 50226 Experts worldwide ranked by ideXlab platform

Lingyan Chen - One of the best experts on this subject based on the ideXlab platform.

  • Linewidth properties of double-Layer surface-relief resonant Brewster filters with equal refractive index.
    Optics express, 2007
    Co-Authors: Tian Sang, Zhanshan Wang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this paper, double-Layer surface-relief resonant Brewster filters consisting of a homogenous Layer and a grating with equal refractive index are obtained by adjusting the grating filling factor, and linewidth properties of these types of filters are investigated. It is shown etch depth error does not change the filter linewidth, but the grating filling factor and the substrate refractive index can significantly change the filter linewidth. Moreover, the coupling strength can be appreciately affected by the Homogeneous Layer thickness, and one can obtain different linewidths at the same operating wavelength by selecting different Homogeneous Layer thickness with other physical parameters maintained.

  • Double-Layer resonant brewster filters consisting of a Homogeneous Layer and a grating with equal refractive index
    Applied Physics Letters, 2006
    Co-Authors: Zhanshan Wang, Tian Sang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this letter, the double-Layer resonant Brewster filters and their properties were presented, which consist of a homogenous Layer with a refractive index equal to that of the grating. By tuning the thickness of the Homogeneous Layer, a multichannel resonant Brewster filter with thin grating thickness can be obtained. For this type of filters, the variety of the grating thickness almost did not change the resonance location, but had a distinct effect on the filter linewidth. By changing grating period or tuning incident angle, different linewidths can be obtained at the same resonance wavelength without losing the low-reflection sideband feature.

Zhanshan Wang - One of the best experts on this subject based on the ideXlab platform.

  • Linewidth properties of double-Layer surface-relief resonant Brewster filters with equal refractive index.
    Optics express, 2007
    Co-Authors: Tian Sang, Zhanshan Wang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this paper, double-Layer surface-relief resonant Brewster filters consisting of a homogenous Layer and a grating with equal refractive index are obtained by adjusting the grating filling factor, and linewidth properties of these types of filters are investigated. It is shown etch depth error does not change the filter linewidth, but the grating filling factor and the substrate refractive index can significantly change the filter linewidth. Moreover, the coupling strength can be appreciately affected by the Homogeneous Layer thickness, and one can obtain different linewidths at the same operating wavelength by selecting different Homogeneous Layer thickness with other physical parameters maintained.

  • Double-Layer resonant brewster filters consisting of a Homogeneous Layer and a grating with equal refractive index
    Applied Physics Letters, 2006
    Co-Authors: Zhanshan Wang, Tian Sang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this letter, the double-Layer resonant Brewster filters and their properties were presented, which consist of a homogenous Layer with a refractive index equal to that of the grating. By tuning the thickness of the Homogeneous Layer, a multichannel resonant Brewster filter with thin grating thickness can be obtained. For this type of filters, the variety of the grating thickness almost did not change the resonance location, but had a distinct effect on the filter linewidth. By changing grating period or tuning incident angle, different linewidths can be obtained at the same resonance wavelength without losing the low-reflection sideband feature.

Tian Sang - One of the best experts on this subject based on the ideXlab platform.

  • Linewidth properties of double-Layer surface-relief resonant Brewster filters with equal refractive index.
    Optics express, 2007
    Co-Authors: Tian Sang, Zhanshan Wang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this paper, double-Layer surface-relief resonant Brewster filters consisting of a homogenous Layer and a grating with equal refractive index are obtained by adjusting the grating filling factor, and linewidth properties of these types of filters are investigated. It is shown etch depth error does not change the filter linewidth, but the grating filling factor and the substrate refractive index can significantly change the filter linewidth. Moreover, the coupling strength can be appreciately affected by the Homogeneous Layer thickness, and one can obtain different linewidths at the same operating wavelength by selecting different Homogeneous Layer thickness with other physical parameters maintained.

  • Double-Layer resonant brewster filters consisting of a Homogeneous Layer and a grating with equal refractive index
    Applied Physics Letters, 2006
    Co-Authors: Zhanshan Wang, Tian Sang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this letter, the double-Layer resonant Brewster filters and their properties were presented, which consist of a homogenous Layer with a refractive index equal to that of the grating. By tuning the thickness of the Homogeneous Layer, a multichannel resonant Brewster filter with thin grating thickness can be obtained. For this type of filters, the variety of the grating thickness almost did not change the resonance location, but had a distinct effect on the filter linewidth. By changing grating period or tuning incident angle, different linewidths can be obtained at the same resonance wavelength without losing the low-reflection sideband feature.

Jingtao Zhu - One of the best experts on this subject based on the ideXlab platform.

  • Linewidth properties of double-Layer surface-relief resonant Brewster filters with equal refractive index.
    Optics express, 2007
    Co-Authors: Tian Sang, Zhanshan Wang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this paper, double-Layer surface-relief resonant Brewster filters consisting of a homogenous Layer and a grating with equal refractive index are obtained by adjusting the grating filling factor, and linewidth properties of these types of filters are investigated. It is shown etch depth error does not change the filter linewidth, but the grating filling factor and the substrate refractive index can significantly change the filter linewidth. Moreover, the coupling strength can be appreciately affected by the Homogeneous Layer thickness, and one can obtain different linewidths at the same operating wavelength by selecting different Homogeneous Layer thickness with other physical parameters maintained.

  • Double-Layer resonant brewster filters consisting of a Homogeneous Layer and a grating with equal refractive index
    Applied Physics Letters, 2006
    Co-Authors: Zhanshan Wang, Tian Sang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this letter, the double-Layer resonant Brewster filters and their properties were presented, which consist of a homogenous Layer with a refractive index equal to that of the grating. By tuning the thickness of the Homogeneous Layer, a multichannel resonant Brewster filter with thin grating thickness can be obtained. For this type of filters, the variety of the grating thickness almost did not change the resonance location, but had a distinct effect on the filter linewidth. By changing grating period or tuning incident angle, different linewidths can be obtained at the same resonance wavelength without losing the low-reflection sideband feature.

Li Wang - One of the best experts on this subject based on the ideXlab platform.

  • Linewidth properties of double-Layer surface-relief resonant Brewster filters with equal refractive index.
    Optics express, 2007
    Co-Authors: Tian Sang, Zhanshan Wang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this paper, double-Layer surface-relief resonant Brewster filters consisting of a homogenous Layer and a grating with equal refractive index are obtained by adjusting the grating filling factor, and linewidth properties of these types of filters are investigated. It is shown etch depth error does not change the filter linewidth, but the grating filling factor and the substrate refractive index can significantly change the filter linewidth. Moreover, the coupling strength can be appreciately affected by the Homogeneous Layer thickness, and one can obtain different linewidths at the same operating wavelength by selecting different Homogeneous Layer thickness with other physical parameters maintained.

  • Double-Layer resonant brewster filters consisting of a Homogeneous Layer and a grating with equal refractive index
    Applied Physics Letters, 2006
    Co-Authors: Zhanshan Wang, Tian Sang, Jingtao Zhu, Li Wang, Lingyan Chen
    Abstract:

    In this letter, the double-Layer resonant Brewster filters and their properties were presented, which consist of a homogenous Layer with a refractive index equal to that of the grating. By tuning the thickness of the Homogeneous Layer, a multichannel resonant Brewster filter with thin grating thickness can be obtained. For this type of filters, the variety of the grating thickness almost did not change the resonance location, but had a distinct effect on the filter linewidth. By changing grating period or tuning incident angle, different linewidths can be obtained at the same resonance wavelength without losing the low-reflection sideband feature.