The Experts below are selected from a list of 78 Experts worldwide ranked by ideXlab platform
May Ritt Pedersen - One of the best experts on this subject based on the ideXlab platform.
-
evaluation of Horner Plot corrected log derived temperatures in the danish central graben north sea
Natural resources research, 2004Co-Authors: Douglas W Waples, May Ritt PedersenAbstract:A small dataset comprising all temperature available data from reliable Horner Plots from the Danish Central Graben was examined. Temperatures obtained by extrapolation using standard Horner Plots were determined to be lower than “true” formation temperatures, as interpreted from DST data. Excellent agreement between “true” formation temperatures and Horner Plot temperatures was achieved when the Horner Plot temperatures (THP) were corrected upward by an amount proportional to the slope (A) of the Horner Plot using the equation \(\hspace*{120pt}T_{\rm true} = T_{\rm HP} + 26\cdot \exp(-0.0052\,{\it A}) \) where the temperatures and the slope are in degrees Celsius. The standard deviation of the error in the corrected Horner Plot temperatures was 2.1°C, indicating that this method is consistent. Further studies using larger numbers of Horner Plots from a variety of geographic areas should be carried out to test and refine the hypotheses presented here. Efforts also should be made to understand the causes of variability in slopes of Horner Plots.
Douglas W Waples - One of the best experts on this subject based on the ideXlab platform.
-
evaluation of Horner Plot corrected log derived temperatures in the danish central graben north sea
Natural resources research, 2004Co-Authors: Douglas W Waples, May Ritt PedersenAbstract:A small dataset comprising all temperature available data from reliable Horner Plots from the Danish Central Graben was examined. Temperatures obtained by extrapolation using standard Horner Plots were determined to be lower than “true” formation temperatures, as interpreted from DST data. Excellent agreement between “true” formation temperatures and Horner Plot temperatures was achieved when the Horner Plot temperatures (THP) were corrected upward by an amount proportional to the slope (A) of the Horner Plot using the equation \(\hspace*{120pt}T_{\rm true} = T_{\rm HP} + 26\cdot \exp(-0.0052\,{\it A}) \) where the temperatures and the slope are in degrees Celsius. The standard deviation of the error in the corrected Horner Plot temperatures was 2.1°C, indicating that this method is consistent. Further studies using larger numbers of Horner Plots from a variety of geographic areas should be carried out to test and refine the hypotheses presented here. Efforts also should be made to understand the causes of variability in slopes of Horner Plots.
Pramono Beni - One of the best experts on this subject based on the ideXlab platform.
-
ANALISA PRESSURE BUILD-UP TEST DENGAN MENGGUNAKAN METODE Horner MANUAL UNTUK PENENTUAN KERUSAKAN FORMASI PADA SUMUR “X” LAPANGAN “Y”
2011Co-Authors: Pramono BeniAbstract:Penurunan produktivitas formasi pada Sumur “X” Lapangan “Y” disebabkan oleh beberapa faktor, salah satunya adalah adanya kerusakan pada formasi. Untuk mengidentifikasi kerusakan tersebut dilakukan test sumur. Test yang dilakukan adalah Pressure Build Up Test dengan cara memproduksi suatu sumur dengan waktu tertentu dengan laju alir yang tetap kemudian ditutup sehingga tekanan akan naik dan dicatat sebagai fungsi waktu. Tahapan-tahapan analisa Pressure Build-Up dengan meode Horner adalah persiapan data-data pendukung seperti data produksi (tp, qo, rw, Pwf), data PVT (µo, Bo, Ct), data reservoir (Φ,h) dan data PBU (Pws, t). Kemudian membuat grafik log-log Plot dengan Plot Δt vs ΔP. Dari hasil Plot tersebut dapat diperoleh nilai end of wellbore storage ditambah 1-1.5 cycle untuk menentukan awal dari tekanan yang tidak terpangaruh wellbore storage. Kemudian membuat grafik semilog Plot (Horner Plot) dengan Plot Pws∆∆+tttp vs , harga end of wellbore storage digunakan untuk menentukan Horner time. Dari hasil Horner Plot diperoleh regim aliran daerah pengurasan sumur, dibagi menjadi 3: segmen early time, middle time, dan late time. Analisa Pressure Build-Up test dilakukan pada segmen middle time, pada segmen ini diperoleh harga slope (m), permeabilitas (k), faktor skin (S), P1jam dengan ekstrapolasi Δt = 1 jam. Dari harga parameter m, k, P1jamHasil analisa Pressure Build-Up test dengan menggunakan metode Horner secara manual pada sumur “X” adalah P* = 2029.6 psia, k = 11.57 mD, skin = +10.98, ΔP dan S yang diperoleh digunakan untuk menentukan harga parameter yang lain sepeti ΔPs, PI, FE. Berdasarkan harga parameter tersebut dapat diketahui formasi tersebut mengalami kerusakan atau perbaikan, serta kemampuan produktifitas formasinya. skin = 152.18 psia, riBerdasarkan kurva IPR diperoleh laju produksi maksimal minyak pada FE=0.61 adalah 142.04 bopd, sedangkan laju produksi maksimal minyak pada FE=1 adalah 177.48 bopd. Perbedaan harga produksi minyak ini disebabkan karena adanya kerusakan disekitar lubang formasi ditandai dengan nilai skin yang berharga positif. = 566.476 ft, Flow Efisiensi = 0.61, dan Productivity Index sebesar 1.45 bopd/Psia
Arifah Eka - One of the best experts on this subject based on the ideXlab platform.
-
ANALISA PRESSURE BUILD-UP TEST DENGAN MENGGUNAKAN METODE Horner MANUAL DAN ECRINE (SAPHIR)v.4.02.04 UNTUK MENGETAHUI KEMAMPUAN SUATU SUMUR UNTUK BERPRODUKSI PADA SUMUR “X” LAPANGAN “Y”
2013Co-Authors: Arifah EkaAbstract:ABSTRAK StrukturJatibarangterletak35 km arah barat laut dari kota Cirebon telah dieksploitasi sejak tahun 1920 oleh BPM. Ditemukannya hidrokarbon pada Formasi Volkanik sampai saat ini formasi Volkanik masih merupakan salah satu penghasil minyak yang utama di Pertamina DOH JawaBagian Barat dengan produksi rata-rata saat ini sebesar 3000 BOPD Pada dasarnya analisa Pressure Build-Up dilakukan pertama-tama dengan memproduksi sumur selama suatu selang waktu tertentu dengan laju aliran yang tetap (konstan), kemudian menutup sumur tersebut. Penutupan sumur ini menyebabkan naiknya tekanan yang dicatat sebagai fungsi waktu (tekanan yang dicatat ini biasanya adalah tekanan dasar sumur). Kemudian membuat grafik log-log Plot dengan Plot Δt vs ΔP. Dari hasil Plot tersebut dapat diperoleh nilai end of wellbore storage ditambah 1-1,5 cycle untuk menentukan awal dari tekanan yang tidak terpangaruh wellbore storage. Kemudian membuat grafik semilog Plot (Horner Plot) dengan Plot Pws vs t tp t . Dari hasil Horner Plot dan end of wellbore storage diperoleh regim aliran daerah pengurasan sumur, dibagi menjadi 3: segmen early time, middle time, dan late time. Hasil analisa menggunakan Simulator Ecrin (Saphir) v4.02 adalah Pi = 1588.18 psi, k = 132.27 md, skin = -3.19 dan model reservoir yang didapat dual porosity PSS. Sedangkan hasil analisa Pressure Build-Up test dengan menggunakan metode Horner secara manual pada sumur “x” adalah Pi(pada early time) = 1653, Pi(pada late time) = 1602 psi, kf = 25.52 md, skinm = -3.46, skinf = -4.16, FE = 5.8, harga ω=0.486 dengan harga λ=1 dan harga Qomax yang didapat 1419.5 bopd Berdasarkan dari hasil perhitungan di Horner time diperoleh harga laju produksi maksimal sebesar 1419.5 bopd dengan produktivitas index untuk kondisi actual adalah 6.05 bpd/psi, sedangkan produktivitas index minyak untuk kondisi ideal adalah 1.04 bpd/psi
Edi Jaya Suranta Bangun - One of the best experts on this subject based on the ideXlab platform.
-
ANALISA PRESSURE BUILD-UP TEST UNTUK MENGETAHUI PRODUKTIVITAS FORMASI DENGAN MENGGUNAKAN METODE Horner MANUAL PADA SUMUR “EJ” LAPANGAN “Y”
2012Co-Authors: Edi Jaya Suranta BangunAbstract:Kerusakan formasi dapat terjadi sepanjang waktu sebagai akibat negatif dari aktifitas-aktifitas yang terjadi atau yang dilakukan pada sumur mulai dari aktifitas pemboran, penyemenan, komplesi sumur dan perforasi serta pada saat sumur itu berproduksi. Terjadinya kerusakan formasi ini akan menyebabkan mengecilnya harga permeabilitas dan menurunnya produktivitas suatu sumur, sehingga q akan turun. Pada dasarnya analisa Pressure Build-Up dilakukan pertama-tama dengan memproduksi sumur selama suatu selang waktu tertentu dengan laju aliran yang tetap (konstan), kemudian menutup sumur tersebut. Penutupan sumur ini menyebabkan naiknya tekanan yang dicatat sebagai fungsi waktu (tekanan yang dicatat ini biasanya adalah tekanan dasar sumur). Tahapan-tahapan analisa Pressure Build-Up dengan metode Horner adalah persiapan data pendukung seperti data produksi (tp, qo, rw, Pwf), data PVT (µo, Bo, Ct), data reservoir (Φ,h) dan data PBU (Pws, t), kemudian membuat grafik log-log Plot dengan Plot Δt vs ΔP. Dari hasil Plot tersebut dapat diperoleh nilai end of wellbore storage ditambah 1-1,5 cycle untuk menentukan awal dari tekanan yang tidak terpangaruh wellbore storage, dan terakhir membuat grafik semilog Plot (Horner Plot) dengan Plot Pws ⎞ ⎜ ⎝ ⎛ ttp Δ Δ+ t vs ⎟ ⎠ . Dari hasil Horner Plot dan end of wellbore storage diperoleh harga slope, P1jam dan P* yang akan digunakan untuk menghitung harga permeabilitas, skin, produktivitas indeks, dan flow efficiency. Analisa PBU dilakukan pada Sumur “EJ” yang dibor pada tanggal 15 Februari 2009 dan dilakukan pengetesan sumur secara PBU pada tanggal 3 Februari 2010. Hasil analisa PBU dengan menggunakan metode Horner secara manual pada sumur “EJ” adalah P* = 3145 psi, k = 4.16 md, skin = 3.01, Δpskin 345.19 psi, ri =130.00288 ft. Kemudian pada Sumur “EJ” ini juga dilakukan perhitungan produksi maksimum didapatkan sebesar 785.6 bopd dari produksi maksimum idealnya sebesar 962.2 bopd dengan menggunakan Metode Standing.