The Experts below are selected from a list of 318 Experts worldwide ranked by ideXlab platform
Bäckemo David - One of the best experts on this subject based on the ideXlab platform.
-
Processanalys och utveckling för ökad lönsamhet på Trelleborg Industrial Products Sweden AB : Process analysis and development for increased profit at Trelleborg Industrial Products Sweden AB
Örebro universitet Institutionen för naturvetenskap och teknik, 2020Co-Authors: Pajula Pontus, Bäckemo DavidAbstract:Denna rapport behandlar ett examensarbete som utfördes på företaget Trelleborg Industrial Products Sweden AB. Företaget arbetar idag med polymerlösningar till olika industrier. Examensarbetets syfte var att förbättra tillverkningsprocessen av företagets produkt Plunge, som genererade en oacceptabelt låg vinst. Plunge är en produkt tillverkad i metall och silikon som tillsluter barnmatsburkar. Tillverkningsprocessen skulle förbättras genom att utveckla lösningar för delprocesserna tvättning och målning som skulle minska tillverkningskostnaderna. Detta samtidigt som lösningarna skulle möjliggöra en flytt av delprocesserna från den nuvarande avdelningen till avdelningen instryk. För att förbättra delprocessen målning utvecklades lösningskoncept på målningsmallar med designmetoden Double Diamond. Metoden resulterade i tre lösningskoncept med tillhörande lönsamhetskalkyler. Tvättprocessen skulle förbättras genom en investering av en ny tvättmetod. Lösningen hittades med metoder från Double Diamond. Arbetet resulterade i att en egenkonstruerad tvätt rekommenderades till företaget. För fortsatt arbete med förbättring av tillverkningsprocessen bör lösningskoncepten för målningsmallarna utvecklas vidare till mer kompletta prototyper samt bör kalkylerna för lösningskoncepten förfinas parallellt med utvecklingsarbetet. Tvättmetoden bör testas för att avgöra arbetskostnader och kapacitet, vilket kan ligga som grund för ytterligare förbättringar av tvättprocessen.This report deals with a thesis that was carried out at the company Trelleborg Industrial Products Sweden AB. The company works with polymer solutions for various industries. The goal of the project was to improve the manufacturing process of the company's product Plunge, which generated unacceptably low profits. Plunge is a product made of metal and silicone that seals jars of babyfood. The manufacturing process would be improved by developing solutions that would allow the subprocesses washing and painting to be moved from the operators at the press to the department Instryk while reducing the costs of the subprocesses. In order to improve the subprocess painting, concepts of painting templates were developed with the design method Double Diamond. The method resulted in three concept solutions with associated profitability calculations. The washing process would be improved by an investment of a new washing method. The solution was found using methods from Double Diamond. The work resulted in a washing method that was developed in-house being recommended to the company. In order to continue to work on improving the manufacturing process, the concepts of the painting templates should be further developed into more complete prototypes and the calculations for the solution concepts should be refined in parallel with the development. The washing method should be tested to determine labor costs and capacity, which may be the basis for further improvements to the washing process.
Daniel E Kugler - One of the best experts on this subject based on the ideXlab platform.
-
Policy directions for agricultural Industrial Products in the United States
Industrial Crops and Products, 1997Co-Authors: Daniel E KuglerAbstract:Abstract Policy for research, development and commercialization of agricultural Industrial Products in the U.S. is subject to many forces. In the mid-1990s, important new information is available or forthcoming for policy makers to use in preparing our Nation's agenda for agricultural Industrial Products in the 21st century. Among those, new information sources are the US Department of Agriculture's budget and strategic plans, work by the President's Council on Sustainable Development, the 1996 Farm Bill passed by the U.S. Congress, and a biobased Industrial Products study by the National Academy of Sciences. It is concluded that the overall policy climate is very positive and, given broad collaboration from all sectors, opportunity is evident for the United States to transition to a more renewable resource-based economy.
Pajula Pontus - One of the best experts on this subject based on the ideXlab platform.
-
Processanalys och utveckling för ökad lönsamhet på Trelleborg Industrial Products Sweden AB : Process analysis and development for increased profit at Trelleborg Industrial Products Sweden AB
Örebro universitet Institutionen för naturvetenskap och teknik, 2020Co-Authors: Pajula Pontus, Bäckemo DavidAbstract:Denna rapport behandlar ett examensarbete som utfördes på företaget Trelleborg Industrial Products Sweden AB. Företaget arbetar idag med polymerlösningar till olika industrier. Examensarbetets syfte var att förbättra tillverkningsprocessen av företagets produkt Plunge, som genererade en oacceptabelt låg vinst. Plunge är en produkt tillverkad i metall och silikon som tillsluter barnmatsburkar. Tillverkningsprocessen skulle förbättras genom att utveckla lösningar för delprocesserna tvättning och målning som skulle minska tillverkningskostnaderna. Detta samtidigt som lösningarna skulle möjliggöra en flytt av delprocesserna från den nuvarande avdelningen till avdelningen instryk. För att förbättra delprocessen målning utvecklades lösningskoncept på målningsmallar med designmetoden Double Diamond. Metoden resulterade i tre lösningskoncept med tillhörande lönsamhetskalkyler. Tvättprocessen skulle förbättras genom en investering av en ny tvättmetod. Lösningen hittades med metoder från Double Diamond. Arbetet resulterade i att en egenkonstruerad tvätt rekommenderades till företaget. För fortsatt arbete med förbättring av tillverkningsprocessen bör lösningskoncepten för målningsmallarna utvecklas vidare till mer kompletta prototyper samt bör kalkylerna för lösningskoncepten förfinas parallellt med utvecklingsarbetet. Tvättmetoden bör testas för att avgöra arbetskostnader och kapacitet, vilket kan ligga som grund för ytterligare förbättringar av tvättprocessen.This report deals with a thesis that was carried out at the company Trelleborg Industrial Products Sweden AB. The company works with polymer solutions for various industries. The goal of the project was to improve the manufacturing process of the company's product Plunge, which generated unacceptably low profits. Plunge is a product made of metal and silicone that seals jars of babyfood. The manufacturing process would be improved by developing solutions that would allow the subprocesses washing and painting to be moved from the operators at the press to the department Instryk while reducing the costs of the subprocesses. In order to improve the subprocess painting, concepts of painting templates were developed with the design method Double Diamond. The method resulted in three concept solutions with associated profitability calculations. The washing process would be improved by an investment of a new washing method. The solution was found using methods from Double Diamond. The work resulted in a washing method that was developed in-house being recommended to the company. In order to continue to work on improving the manufacturing process, the concepts of the painting templates should be further developed into more complete prototypes and the calculations for the solution concepts should be refined in parallel with the development. The washing method should be tested to determine labor costs and capacity, which may be the basis for further improvements to the washing process.
Ma Yao-feng - One of the best experts on this subject based on the ideXlab platform.
-
The Connotation of Tourism Industry,Tourism Industrial Products and Tourism Products
2008Co-Authors: Ma Yao-fengAbstract:Some connotations of tourism definitions are unclear,which affects tourism science studying and tourism theory system improving.After analysing definitions produced by other researchers,this research explains the content of tourism Industrial product and connotation of tourist attractions,suggests the definitions of tourism industry,tourism Industrial Products,and tourism Products,then analyzes relationships between tourism and tourism industry,as well as between tourism Products and tourism industry Products. This connotation includes all tourist activities in tourism destination,it could offer the theoretical foundation to researching on interaction between tourist and tourism destination,make the scientific contents of tourism sustainable development cleare,and make tourism science research and develop rationally.
Kenji Amiya - One of the best experts on this subject based on the ideXlab platform.
-
Novel applications of bulk metallic glass for Industrial Products
Journal of Non-crystalline Solids, 2007Co-Authors: Nobuyuki Nishiyama, Kenji AmiyaAbstract:Abstract The possibility of applying metallic glass parts in Industrial Products is investigated. Ti-based glassy tubes have been applied to a Coriolis mass flowmeter, and the prototype of the flowmeter exhibits 28.5 times higher sensitivity than that of the conventional one made of SUS630. Zr55Al10Ni5Cu30 glassy diaphragms are applied in pressure sensors. The prototype of pressure sensor with a Zr-based glassy diaphragm exhibits 3.8 times higher sensitivity than that of the sensor with the conventional SUS630 diaphragm. The obtained results suggest that innovative Products can be produced by using of metallic glass parts, and metallic glass is promising as an Industrial material with outstandingly high performance for the near future.
-
Bulk Metallic Glasses for Industrial Products
MATERIALS TRANSACTIONS, 2004Co-Authors: Nobuyuki Nishiyama, Kenji Amiya, Akihisa InoueAbstract:By use of excellent properties of bulk metallic glasses, some Industrial Products were practically prepared and their performances were investigated. Ni-based BMG microgear prepared by injection casting exhibits nano-imprintability against the surface roughness of mold. Linear actuator constructed by a set of Fe-based BMG yokes generates relatively large driving force due to the Lorentz force. The newly developed alloy with a nominal atomic composition of Ti52Cu23Ni11Mo7Fe7 exhibits high yield strength of 1250 MPa, high fracture strength of 2740 MPa and large plastic elongation of over 20%. These results for the Industrial Products made of BMGs are promising for future developments as Industrial materials with high performance.