The Experts below are selected from a list of 65064 Experts worldwide ranked by ideXlab platform
Felix Bussieres - One of the best experts on this subject based on the ideXlab platform.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
Applied Physics Letters, 2018Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Markus Weiss, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
arXiv: Quantum Physics, 2017Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
Misael Caloz - One of the best experts on this subject based on the ideXlab platform.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
Applied Physics Letters, 2018Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Markus Weiss, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
arXiv: Quantum Physics, 2017Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
Chulsoon Hwang - One of the best experts on this subject based on the ideXlab platform.
-
improved target impedance concept with Jitter specification
IEEE Transactions on Electromagnetic Compatibility, 2020Co-Authors: Muqi Ouyang, Chulsoon HwangAbstract:In this article, an improved target impedance concept directly correlating circuit output Jitter with power distribution network (PDN) R - L - C parameters is proposed. A systematic procedure to develop the target impedance curves is formulated and developed for common CMOS buffer circuits. The relationship between output Jitter and PDN R-L-C parameters is analytically derived by evaluating the time domain voltage ripple to Jitter transfer relationship along with the relationship between time domain voltage ripple and PDN R-L-C parameters. Given the transient integrated circuit switching current and the Jitter specification, multiple target impedance curves can be defined for a specific circuit. The Jitter and PDN R-L-C analytical correlations are validated through HSPICE simulation. The application of the proposed target impedance concept with Jitter specification is also demonstrated via simulation.
-
Jitter-Aware Target Impedance
2019 IEEE International Symposium on Electromagnetic Compatibility Signal & Power Integrity (EMC+SIPI), 2019Co-Authors: Yin Sun, Jingook Kim, Chulsoon HwangAbstract:A new concept of target impedance which directly correlates the I/O buffer output Jitter with the power distribution network (PDN) design is proposed. Jitter-ware target impedance is derived from the time domain waveform of power voltage ripple and the maximum allowable Jitter assuming the single stage buffer as a RC network, which is then applied to the PDN design given a certain Jitter specification. From HSPICE simulation of transient switching current, PDN impedance and power voltage ripple, it is shown that the proposed Jitter-aware target impedance successfully correlates power supply induced Jitter (PSIJ) and PDN impedance parameters with a simple analytical expression.
Claire Autebert - One of the best experts on this subject based on the ideXlab platform.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
Applied Physics Letters, 2018Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Markus Weiss, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
arXiv: Quantum Physics, 2017Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
Matthieu Perrenoud - One of the best experts on this subject based on the ideXlab platform.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
Applied Physics Letters, 2018Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Markus Weiss, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
-
high detection efficiency and low timing Jitter with amorphous superconducting nanowire single photon detectors
arXiv: Quantum Physics, 2017Co-Authors: Misael Caloz, Matthieu Perrenoud, Claire Autebert, Boris Korzh, Christian Schonenberger, Richard J Warburton, Hugo Zbinden, Felix BussieresAbstract:Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their Jitter performance. Combining a very low Jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system Jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the Jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
