The Experts below are selected from a list of 3060 Experts worldwide ranked by ideXlab platform
Rongrong Chen - One of the best experts on this subject based on the ideXlab platform.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Xiaoyan Jing, Jing YuAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Jing Yu, Xiaoyan Jing, Jun WangAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.
Jing Yu - One of the best experts on this subject based on the ideXlab platform.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Xiaoyan Jing, Jing YuAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Jing Yu, Xiaoyan Jing, Jun WangAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.
Liman Zhao - One of the best experts on this subject based on the ideXlab platform.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Xiaoyan Jing, Jing YuAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Jing Yu, Xiaoyan Jing, Jun WangAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.
Jooho Chung - One of the best experts on this subject based on the ideXlab platform.
-
free radical scavenging effect of diospyros kaki Laminaria japonica and undaria pinnatifida
Fitoterapia, 2002Co-Authors: Soon Ah Kang, Sung Hyun Chung, Ryo Won Choue, Kang-hyun Leem, Jooho ChungAbstract:Abstract Diospyros kaki folium, Laminaria japonica thallus and Undaria pinnatifida thallus have been used traditionally in Korea to promote maternal health. The scavenging activity against DPPH (1,1-diphenyl-2-picrylhydrazyl) radicals of the methanol extracts of these plants were investigated. The extract of D. kaki was found to be the most potent, with an IC 50 value of 0.11 mg/ml.
Jun Wang - One of the best experts on this subject based on the ideXlab platform.
-
layer by layer assembled antifouling films with surface microtopography inspired by Laminaria japonica
Applied Surface Science, 2020Co-Authors: Liman Zhao, Rongrong Chen, Jing Yu, Xiaoyan Jing, Jun WangAbstract:Abstract Marine biofouling is an important obstacle to the development of marine resources. Problems such as huge economic losses caused by biofouling and environmental damage caused by toxic antifouling agents have not been resolved. Therefore, it is of great significance to develop a novel, environmentally friendly antifouling (AF) materials. However, in the marine environment, Laminaria japonica still has excellent antifouling ability in a relatively static state compared to those parade creatures. Inspired by this, this study reports a synergistic effect between surface topography and chemical modification to inhibit marine biofouling. Firstly, the surface of the Laminaria japonica was analyzed and its morphology was reproduced using a simple moulding process. Additionally, the polyelectrolyte layer composed of sodium alginate and (guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) was chemically modified on the isotropic microstructure surface of PDMS replicas by layer-by-layer assembly method. The anti-adhesion ability of the biomimetic material was tested with Nitzschia closterium (N. closterium) (9 ± 5 diatoms mm−2 of N. closterium adhered). Meanwhile, the antifouling performance of the modified films were evaluated by Escherichia coli (E. coli), and its antibacterial ability were as high as 96.2 ± 1.3%. The combination of microtopography and (GHPEI/ALG) * n films endow the coating with excellent antifouling ability.