Mikroc Pro

14,000,000 Leading Edge Experts on the ideXlab platform

Scan Science and Technology

Contact Leading Edge Experts & Companies

Scan Science and Technology

Contact Leading Edge Experts & Companies

The Experts below are selected from a list of 108 Experts worldwide ranked by ideXlab platform

Treinamentos Softwares Em Sistemas E Embarcados - One of the best experts on this subject based on the ideXlab platform.

Dogan Ibrahim - One of the best experts on this subject based on the ideXlab platform.

  • Internet of Things - An Introduction with PIC Microcontrollers
    2015
    Co-Authors: Dogan Ibrahim
    Abstract:

    This book is written for people who want to learn more about the building blocks of an IoT system and also learn how to setup an IoT system using these blocks.Chapter 1 is an introduction to the IoT systems. In Chapter 2, the basic concepts and possible IoT architectures are discussed. The important parts of any IoT system are the sensors and actuators and they are described briefly in Chapter 3. The devices in an IoT system usually communicate with each other and the important aspect of IoT communication is covered in Chapter 4. Chapter 5 Proceeds with the features of some of the commonly used development kits. One of these, the Clicker 2 for PIC18FJ manufactured by mikroElektronika, can be used as a Processor in IoT systems and its features are described in detail in Chapter 6. A popular microcontroller C language, Mikroc Pro for PIC gets introduced in Chapter 7. Chapter 8 covers the use of a click board with the Clicker 2 for PIC18FJ development kit. Similarly, the use of a sensor click board is described as a Project in Chapter 9, and an actuator board in Chapter 10. Chapters 11 and 12 cover Bluetooth and Wi-Fi technologies in microcontroller based systems, and the remaining chapters of the book demo the creation of a simple Wi-Fi based IoT system with cloud-based data storage.This book has been written with the assumption that the reader has taken a course on digital logic design and has been exposed to writing Programs using at least one high-level Programming language. Knowledge of the C Programming language will be very useful. Also, familiarity with at least one member of the PIC series of microcontrollers (e.g. PIC16 or PIC18) will be an advantage.

  • pic microcontroller Projects in c basic to advanced
    2014
    Co-Authors: Dogan Ibrahim
    Abstract:

    Extensively revised and updated to encompass the latest developments in the PIC 18FXXX series, this book demonstrates how to develop a range of microcontroller applications through a Project-based apProach. After giving an introduction to Programming in C using the popular Mikroc Pro for PIC and MPLAB XC8 languages, this book describes the Project development cycle in full. The book walks you through fully tried and tested hands-on Projects, including many new, advanced topics such as Ethernet Programming, digital signal Processing, and RFid technology. This book is ideal for engineers, technicians, hobbyists and students who have knowledge of the basic principles of PIC microcontrollers and want to develop more advanced applications using the PIC18F series. This book Includes over fifty Projects which are divided into three categories: Basic, Intermediate, and Advanced. New Projects in this edition: Logic Probe Custom LCD font design Hi/Lo game Generating various waveforms in real-time Ultrasonic height measurement Frequency counter Reaction timer GPS Projects Closed-loop ON/OFF temperature control Bluetooth Projects (master and slave) RFid Projects Clock using Real-time-clock (RTC) chip RTC alarm Project Graphics LCD (GLCD) Projects Barometer+thermometer+altimeter Project Plotting temperature on GLCD Ethernet web browser based control Ethernet UDP based control Digital signal Processing (Low Pass Filter design) Automotive LIN bus Project Automotive CAN bus Project Multitasking Projects (using both cooperative and Round-robin scheduling) Unipolar stepper motor Projects Bipolar stepper motor Projects Closed-loop ON/OFF DC motor control A clear introduction to the PIC 18FXXX microcontroller's architecture Covers developing wireless and sensor network applications, SD card Projects, and multi-tasking; all demonstrated with the block and circuit diagram, Program description in PDL, Program listing, and Program description Includes more than 50 basic, intermediate, and advanced Projects

  • PIC Microcontroller Projects in C, Second Edition: Basic to Advanced
    2014
    Co-Authors: Dogan Ibrahim
    Abstract:

    Extensively revised and updated to encompass the latest developments in the PIC 18FXXX series, this book demonstrates how to develop a range of microcontroller applications through a Project-based apProach. After giving an introduction to Programming in C using the popular Mikroc Pro for PIC and MPLAB XC8 languages, this book describes the Project development cycle in full. The book walks you through fully tried and tested hands-on Projects, including many new, advanced topics such as Ethernet Programming, digital signal Processing, and RFid technology. This book is ideal for engineers, technicians, hobbyists and students who have knowledge of the basic principles of PIC microcontrollers and want to develop more advanced applications using the PIC18F series. This book Includes over fifty Projects which are divided into three categories: Basic, Intermediate, and Advanced. New Projects in this edition: Logic Probe Custom LCD font design Hi/Lo game Generating various waveforms in real-time Ultrasonic height measurement Frequency counter Reaction timer GPS Projects Closed-loop ON/OFF temperature control Bluetooth Projects (master and slave) RFid Projects Clock using Real-time-clock (RTC) chip RTC alarm Project Graphics LCD (GLCD) Projects Barometer+thermometer+altimeter Project Plotting temperature on GLCD Ethernet web browser based control Ethernet UDP based control Digital signal Processing (Low Pass Filter design) Automotive LIN bus Project Automotive CAN bus Project Multitasking Projects (using both cooperative and Round-robin scheduling) Unipolar stepper motor Projects Bipolar stepper motor Projects Closed-loop ON/OFF DC motor controlA clear introduction to the PIC 18FXXX microcontroller's architecture Covers developing wireless and sensor network applications, SD card Projects, and multi-tasking; all demonstrated with the block and circuit diagram, Program description in PDL, Program listing, and Program descriptionIncludes more than 50 basic, intermediate, and advanced Projects

  • C Programming for 32-Bit PIC Microcontrollers
    Designing Embedded Systems with 32-Bit PIC Microcontrollers and MikroC, 2014
    Co-Authors: Dogan Ibrahim
    Abstract:

    This chapter is about the Mikroc Pro for PIC32 language. This is a popular C Programming language developed by mikroElektronika for the Programming the 32-bit PIC microcontrollers. The chapter describes the Programming in detail using this language.

  • Mikroc Pro for PIC Programming Language
    PIC Microcontroller Projects in C, 2014
    Co-Authors: Dogan Ibrahim
    Abstract:

    This chapter Provides an introduction to the various C compilers available for the PIC18F family of microcontrollers. The Mikroc Pro for PIC compiler is described briefly. In addition, the chapter describes the operation of the MPLAB XC8 features and its differences from the Mikroc Pro for PIC compiler. The complete Project development cycle is described with examples, showing the Program creation, compilation, and uploading the target microcontroller.

Zúñiga Salinas, Luis Felipe - One of the best experts on this subject based on the ideXlab platform.

  • Implementación de enlace de fibra óptica usando microcontrolador
    'Escuela Superior Politecnica del Litoral', 2018
    Co-Authors: Sánchez González, César Manuel, Zúñiga Salinas, Luis Felipe
    Abstract:

    El Proyecto de la tesina consiste en implementar un sistema de comunicación con fibra óptica basado en microcontroladores, la comunicación se la puede realizar de manera serial. El objetivo de este Proyecto es plasmar los conocimientos adquiridos en cursos previos, cursos como: comunicaciones ópticas, microcontroladores, laboratorio de electrónica entre otros. El desarrollo de este trabajo se basa en Programación en lenguaje C haciendo uso para ello del compilador Mikroc Pro el mismo que incluye un considerable número de librerías que nos facilitan la Programación del microcontrolador.GuayaquilIngeniero en Electrónica y Telecomunicacione

Vargas Germán - One of the best experts on this subject based on the ideXlab platform.

  • Implementación de enlace de fibra óptica usando microcontrolador
    2013
    Co-Authors: Zúñiga Felipe, Sánchez César, Vargas Germán
    Abstract:

    Este Proyecto consiste en implementar un sistema de comunicación basado en fibra óptica utilizando para ello microcontrolador, para dicha comunicación hacemos uso de la transmisión serial. El desarrollo de este trabajo se fundamenta en la Programación del PIC en lenguaje C haciendo uso del compilador Mikroc Pro y el uso del software Proteus para la simulación respectiva. Mikroc Pro es un compilador muy empleado en la actualidad puesto que dispone de un número considerable de librerías que facilitan el trabajo del Programador. Proteus en cambio es un software que permite simular el comportamiento de diferentes componentes electrónicos, de igual manera permite la fabricación de las pistas electrónicas de los circuitos y la elaboración de los diagramas esquemático

Sánchez González, César Manuel - One of the best experts on this subject based on the ideXlab platform.

  • Implementación de enlace de fibra óptica usando microcontrolador
    'Escuela Superior Politecnica del Litoral', 2018
    Co-Authors: Sánchez González, César Manuel, Zúñiga Salinas, Luis Felipe
    Abstract:

    El Proyecto de la tesina consiste en implementar un sistema de comunicación con fibra óptica basado en microcontroladores, la comunicación se la puede realizar de manera serial. El objetivo de este Proyecto es plasmar los conocimientos adquiridos en cursos previos, cursos como: comunicaciones ópticas, microcontroladores, laboratorio de electrónica entre otros. El desarrollo de este trabajo se basa en Programación en lenguaje C haciendo uso para ello del compilador Mikroc Pro el mismo que incluye un considerable número de librerías que nos facilitan la Programación del microcontrolador.GuayaquilIngeniero en Electrónica y Telecomunicacione

Mikroc Pro - 15 days free trial to Access Experts & Abstracts