The Experts below are selected from a list of 93 Experts worldwide ranked by ideXlab platform

Dogan Ibrahim - One of the best experts on this subject based on the ideXlab platform.

  • Internet of Things - An Introduction with PIC Microcontrollers
    2015
    Co-Authors: Dogan Ibrahim
    Abstract:

    This book is written for people who want to learn more about the building blocks of an IoT system and also learn how to setup an IoT system using these blocks.Chapter 1 is an introduction to the IoT systems. In Chapter 2, the basic concepts and possible IoT architectures are discussed. The important parts of any IoT system are the sensors and actuators and they are described briefly in Chapter 3. The devices in an IoT system usually communicate with each other and the important aspect of IoT communication is covered in Chapter 4. Chapter 5 proceeds with the features of some of the commonly used development kits. One of these, the Clicker 2 for PIC18FJ manufactured by Mikroelektronika, can be used as a processor in IoT systems and its features are described in detail in Chapter 6. A popular microcontroller C language, mikroC Pro for PIC gets introduced in Chapter 7. Chapter 8 covers the use of a click board with the Clicker 2 for PIC18FJ development kit. Similarly, the use of a sensor click board is described as a project in Chapter 9, and an actuator board in Chapter 10. Chapters 11 and 12 cover Bluetooth and Wi-Fi technologies in microcontroller based systems, and the remaining chapters of the book demo the creation of a simple Wi-Fi based IoT system with cloud-based data storage.This book has been written with the assumption that the reader has taken a course on digital logic design and has been exposed to writing programs using at least one high-level programming language. Knowledge of the C programming language will be very useful. Also, familiarity with at least one member of the PIC series of microcontrollers (e.g. PIC16 or PIC18) will be an advantage.

  • Design of a Microcontroller Based Uroflowmetry Device
    2014
    Co-Authors: Dogan Ibrahim, Nevzat Ozyurtlu
    Abstract:

    This book is about the design of a microcontroller based uroflowmetry device. The device collects urine in real time from a patient and then sends this data to a PC over a serial link. The PC draws the uroflow graph using the Matlab programming environment. The device is designed using the popular development kit "Ready for PIC", manufactured by Mikroelektronika. This development kit uses the highly popular PIC16F887 microcontroller chip. The designed device can be used to diagnose possible urinary track problems.

  • C Programming for 32-Bit PIC Microcontrollers
    Designing Embedded Systems with 32-Bit PIC Microcontrollers and MikroC, 2014
    Co-Authors: Dogan Ibrahim
    Abstract:

    This chapter is about the mikroC PRO for PIC32 language. This is a popular C programming language developed by Mikroelektronika for the programming the 32-bit PIC microcontrollers. The chapter describes the programming in detail using this language.

  • Microcontroller Based GSM/GPRS Projects: Advanced Microcontroller Projects
    2010
    Co-Authors: Dogan Ibrahim, Ahmet Ibrahim
    Abstract:

    A microcontroller is a single-chip computer. Before the invention of the microcontrollers most intelligent systems were designed using microprocessors. A microprocessor is the processing element of a computer, consisting of an Arithmetic and Logic Unit (ALU) and the Control Unit (CU). A microprocessor on its own is useless and it has to be supported by a large number of peripheral chips, such as memory, input-output, timer, interrupt logic and so on. Currently there are many microcontroller chips manufactured by various companies. This book is based on using the highly popular PIC16F887 type microcontroller. GSM/GPRS modems are used in all mobile phones. This book teaches the basic principles of microcontrollers and shows how they can be used in GSM/GPRS based communications projects. All of the examples and the projects in the book are based on the highly popular mikroC language, developed by Mikroelektronika.

  • Microcontroller Based GSM/Gprs Projects
    2010
    Co-Authors: Dogan Ibrahim, Ahmet Ibrahim
    Abstract:

    A microcontroller is a single-chip computer. Before the invention of the microcontrollers most intelligent systems were designed using microprocessors. A microprocessor is the processing element of a computer, consisting of an Arithmetic and Logic Unit (ALU) and the Control Unit (CU). A microprocessor on its own is useless and it has to be supported by a large number of peripheral chips, such as memory, input-output, timer, interrupt logic and so on. Currently there are many microcontroller chips manufactured by various companies. This book is based on using the highly popular PIC16F887 type microcontroller. GSM/GPRS modems are used in all mobile phones. This book teaches the basic principles of microcontrollers and shows how they can be used in GSM/GPRS based communications projects. All of the examples and the projects in the book are based on the highly popular mikroC language, developed by Mikroelektronika.

Ahmet Ibrahim - One of the best experts on this subject based on the ideXlab platform.

  • Microcontroller Based GSM/GPRS Projects: Advanced Microcontroller Projects
    2010
    Co-Authors: Dogan Ibrahim, Ahmet Ibrahim
    Abstract:

    A microcontroller is a single-chip computer. Before the invention of the microcontrollers most intelligent systems were designed using microprocessors. A microprocessor is the processing element of a computer, consisting of an Arithmetic and Logic Unit (ALU) and the Control Unit (CU). A microprocessor on its own is useless and it has to be supported by a large number of peripheral chips, such as memory, input-output, timer, interrupt logic and so on. Currently there are many microcontroller chips manufactured by various companies. This book is based on using the highly popular PIC16F887 type microcontroller. GSM/GPRS modems are used in all mobile phones. This book teaches the basic principles of microcontrollers and shows how they can be used in GSM/GPRS based communications projects. All of the examples and the projects in the book are based on the highly popular mikroC language, developed by Mikroelektronika.

  • Microcontroller Based GSM/Gprs Projects
    2010
    Co-Authors: Dogan Ibrahim, Ahmet Ibrahim
    Abstract:

    A microcontroller is a single-chip computer. Before the invention of the microcontrollers most intelligent systems were designed using microprocessors. A microprocessor is the processing element of a computer, consisting of an Arithmetic and Logic Unit (ALU) and the Control Unit (CU). A microprocessor on its own is useless and it has to be supported by a large number of peripheral chips, such as memory, input-output, timer, interrupt logic and so on. Currently there are many microcontroller chips manufactured by various companies. This book is based on using the highly popular PIC16F887 type microcontroller. GSM/GPRS modems are used in all mobile phones. This book teaches the basic principles of microcontrollers and shows how they can be used in GSM/GPRS based communications projects. All of the examples and the projects in the book are based on the highly popular mikroC language, developed by Mikroelektronika.

Miloljub Smiljanic - One of the best experts on this subject based on the ideXlab platform.

Konferencija Za Elektroniku Telekomunikacije Racunarstvo Automatiku Nuklearnu Tehniku I Etran - One of the best experts on this subject based on the ideXlab platform.

Mohamed Sharaf - One of the best experts on this subject based on the ideXlab platform.

  • Telemetry Over SMS-Based GSM Wireless Communication System
    2012
    Co-Authors: Noha Kamal, Sherine S. Ismail, Hala Abd Elkader, Mohamed Sharaf
    Abstract:

    this study was performed to implement a modern wireless communication system for data collection and communication by using GSM Communication Network as a platform based on SMS. The system depends on EasyPIC5 microcontroller development board as a modern digital communication system together with a smartg100 (GSM) development boards; both development boards are developed and manufactured by Mikroelektronika. This system is used to measure the water level in a field, and implement telemetry over wireless communication network system which Present a solution for irrigation system as an application. In this research a Pressure Sensor (E-Tape Million Pressure sensor) and handmade sensor are used to measure water level value, and calibrating the results. Water level measurement system includes a control center (Base station), a GSM modems, and a telemetry unit (Sub Station), on the other hand the author developed friendly user interface for the wireless telemetry by means of Visual Basic which connect the base station with substations, and create a data base to save a historical data of measured water level. In this Research the author developed an alarm system by using buzzer and flashing leds to warn if there are any errors at any station. Compared to other telemetry systems, in this system the measured data does not sent continuously but it is only sent when the data value is changed, so it provides a minimum size of data reserved in the room service and reduce the cost, on the other hand the other systems send measured data continuously so it reserve the channel all the time and increase the cost. On the other hand in this system we have two way actions, and alarm system which determine the error, where, and how to fix.