The Experts below are selected from a list of 474 Experts worldwide ranked by ideXlab platform
Zhihong Wang - One of the best experts on this subject based on the ideXlab platform.
-
corrosion resistant systems of formate Packer Fluid for g3 n80 tp110ss pipes at high temperature high pressure and high h2s co2 ratios
Royal Society Open Science, 2018Co-Authors: Zhengwu Tao, Zhihong WangAbstract:A series of corrosion problems caused by high-temperature, high-pressure and high-acid gas environments has been an issue in oil and gas production for a long time. During the development of a high...
Zhengwu Tao - One of the best experts on this subject based on the ideXlab platform.
-
corrosion resistant systems of formate Packer Fluid for g3 n80 tp110ss pipes at high temperature high pressure and high h2s co2 ratios
Royal Society Open Science, 2018Co-Authors: Zhengwu Tao, Zhihong WangAbstract:A series of corrosion problems caused by high-temperature, high-pressure and high-acid gas environments has been an issue in oil and gas production for a long time. During the development of a high...
Fadhil Sarhan Kadhim - One of the best experts on this subject based on the ideXlab platform.
-
Investigation of Carbon Steel Corrosion in Water Base Drilling Mud
2016Co-Authors: Fadhil Sarhan KadhimAbstract:Carbon steel, the most widely used engineering material, accounts for approximately 85%, of the annual steel production worldwide. Despite its relatively limited corrosion resistance, carbon steel is used in large tonnages in marine applications, nuclear power and fossil fuel power plants, transportation, chemical processing, petroleum production and refining, pipelines, mining, construction and metal-processing equipment. This paper Investigate Carbon steel corrosion in water. The corrosion rate in production and casing pipes in water base drilling mud (Packer Fluid), different salt concentration (100gm/L, 150 gm/L, 200gm/L) have been used and different temperature (30co, 50 co, 70 co) have been investigated. Weight loss and polarization methods were applied. The results indicate that the corrosion rates decrease with the increasing of salt concentration while the corrosion rates increase with increasing of temperatur
-
investigation of carbon steel corrosion in water base drilling mud
Mathematical Models and Methods in Applied Sciences, 2011Co-Authors: Fadhil Sarhan KadhimAbstract:Carbon steel, the most widely used engineering material, accounts for approximately 85%, of the annual steel production worldwide. Despite its relatively limited corrosion resistance, carbon steel is used in large tonnages in marine applications, nuclear power and fossil fuel power plants, transportation, chemical processing, petroleum production and refining, pipelines, mining, construction and metal-processing equipment. This paper Investigate Carbon steel corrosion in water. The corrosion rate in production and casing pipes in water base drilling mud (Packer Fluid), different salt concentration (100gm/L , 150 gm/L , 200gm/L) have been used and different temperature (30co , 50 co , 70 co) have been investigated. Weight loss and polarization methods were applied. The results indicate that the corrosion rates decrease with the increasing of salt concentration while the corrosion rates increase with increasing of temperature
Mohammad Mahlil Nasution - One of the best experts on this subject based on the ideXlab platform.
-
Completion Fluid dengan Nitrat - Formate Base
Jurnal Jaring SainTek, 2020Co-Authors: Mohammad Mahlil NasutionAbstract:Completion Fluid is a Liquid of Salt Solution (Brine), used during the Well Completion, also to Killing Well job, when doing Work Over Wells and Well Services Jobs and Fishing Job and also functions as Packer Fluid. Completion Fluid is generally used in Reservoir formations that are sensitive to Shales, Clay or other minerals. The purpose of using Completion Fluid is to avoid or reduce formation demage. The formation damage causes reservoir formation that has hydrocarbon potential, after being drilled and produced the flow of oil becomes small and even difficult to flow. Formation damage need to be given very serious attention so that the Oil production in our country can increase significantly because the impact is that production does not increase significantly, Cost of production is high. If an effort to minimize damage is done optimally, it is expected that production will increase significantly so that the production target from year to year can be achieved. This invention relates to the method of making Completion Fluid for Drilling, Work Over and Well Services as Drilling activities in the Oil and Gas industry, using fresh water and solids as the material, more specifically is a solid which is a soluble solid as a base formula for making the Fluid. In this case, the basic material of the solid material used for completion Fluid is Nitrate and Alkali Formate. This completion Fluid can reach SG (Specific Gravity) up to 2.0. This completion Fluid has very low corrosivity (Corrosivity), which is stable at very high temperatures and high pressures.
Nasution Mahlil - One of the best experts on this subject based on the ideXlab platform.
-
Completion Fluid dengan Nitrat - Formate Base
Fakultas Teknik Universitas Bhayangkara Jakarta, 2024Co-Authors: Nasution MahlilAbstract:ABSTRACT – Completion Fluid1 is a Liquid of Salt Solution (Brine2), used during the Well Completion, also to Killing Well job, when doing Work Over Wells and Well Services Jobs and Fishing Job3 and also functions as Packer Fluid. Completion Fluid is generally used in Reservoir formations that are sensitive to Shales, Clay or other minerals. The purpose of using Completion Fluid is to avoid or reduce formation demage4. The damage formation causes reservoir formation that has hydrocarbon potential, after being drilled and produced the flow of oil becomes small and even difficult to flow. Damage formations need to be given very serious attention so that the Oil production in our country can increase significantly because the impact is that production does not increase significantly, Cost of production is high. If an effort to minimize damage is done optimally, it is expected that production will increase significantly so that the production target from year to year can be achieved. This invention relates to the method of making Completion Fluid for Drilling, Work Over and Well Services as Drilling activities in the Oil and Gas industry, using fresh water and solids as the material, more specifically is a solid which is a soluble solid as a base formula for making the Fluid. In this case, the basic material of the solid material used for completion Fluid is Nitrate and Alkali Formate. This completion Fluid can reach SG (Specific Gravity5) up to 2.0. This completion Fluid has very low corrosivity (Corrosivity6), which is stable at very high temperatures and high pressures. Keywords: Completion Fluid, Brine, Fishing Job, Formation Damage, Specific Gravity, Corrosivity
