The Experts below are selected from a list of 1275 Experts worldwide ranked by ideXlab platform
Mercouri G Kanatzidis - One of the best experts on this subject based on the ideXlab platform.
-
organic cation alloying on intralayer a and interlayer a sites in 2d hybrid dion jacobson lead bromide perovskites a a pb2br7
Journal of the American Chemical Society, 2020Co-Authors: Mikaa L Kepenekian, Ioannis Spanopoulos, Yihui He, Claudine Katan, Jacky Even, Richard D Schaller, Ram Seshadri, Constantinos C Stoumpos, Mercouri G KanatzidisAbstract:: Hybrid layered halide perovskites have achieved impressive performance in optoelectronics. New structural types in the two-dimensional (2D) halide system such as the Dion-Jacobson phases have attracted wide research attention due to the short interlayer distance and unique layer orientation that facilitate better charge-transport and higher stability in optoelectronic devices. Here, we report the first solid solution series incorporating both A and A' cations in the 2D Dion-Jacobson family, with the general formula (A')(A)Pb2Br7 ((A' = 3-(aminomethyl)Piperidinium (3AMP) and 4-(aminomethyl)Piperidinium) (4AMP); A = methylammonium (MA) and formamidinium (FA)). Mixing the spacing A' cations and perovskitizer A cations generates the new (3AMP)a(4AMP)1-a(FA)b(MA)1-bPb2Br7 perovskites. The crystallographically refined crystal structures using single-crystal X-ray diffraction data reveal that the distortion of the inorganic framework is heavily influenced by the degree of A' and A alloying. A rising fraction of 4AMP in the structure, decreases the Pb-Br-Pb angles, making the framework more distorted. On the contrary, higher FA fractions increase the Pb-Br-Pb angles. This structural evolution fine-tunes the optical properties where the larger the Pb-Br-Pb angle, the narrower the band gap. The photoluminescence emission energy mirrors this trend. Raman spectroscopy reveals a highly dynamical lattice similar to MAPbBr3 and consistent with the local distortion environment of the [Pb2Br7] framework. Density functional theory (DFT) calculations of the electronic structures reveal the same trend as the experimental results where (3AMP)(FA)Pb2Br7 has the smallest band gap while (4AMP)(MA)Pb2Br7 has the largest band gap. The structural effects from solely the organic cations in the 2D system highlight the importance of understanding the high sensitivity of the optoelectronic properties on the structural tuning in this broad class of materials.
-
hybrid dion jacobson 2d lead iodide perovskites
Journal of the American Chemical Society, 2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Mercouri G Kanatzidis, Laurent Pedesseau, Michael R WasielewskiAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3A...
-
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Laurent Pedesseau, Michael R Wasielewski, Mercouri G KanatzidisAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3AMP series having smaller band gaps than the 4AMP series. Analysis on the crystal structures and density functional theory (DFT) calculations suggest that the origin of the systematic band gap shift is the strong but indirect influence of the organic cation on the inorganic framework. Fabrication of photovoltaic devices utilizing these materials as light absorbers reveals that (3AMP)(MA)3Pb4I13 has the best power conversion efficiency (PCE) of 7.32%, which is much higher than that of the corresponding (4AMP)(MA)3Pb4I13
Jacky Even - One of the best experts on this subject based on the ideXlab platform.
-
organic cation alloying on intralayer a and interlayer a sites in 2d hybrid dion jacobson lead bromide perovskites a a pb2br7
Journal of the American Chemical Society, 2020Co-Authors: Mikaa L Kepenekian, Ioannis Spanopoulos, Yihui He, Claudine Katan, Jacky Even, Richard D Schaller, Ram Seshadri, Constantinos C Stoumpos, Mercouri G KanatzidisAbstract:: Hybrid layered halide perovskites have achieved impressive performance in optoelectronics. New structural types in the two-dimensional (2D) halide system such as the Dion-Jacobson phases have attracted wide research attention due to the short interlayer distance and unique layer orientation that facilitate better charge-transport and higher stability in optoelectronic devices. Here, we report the first solid solution series incorporating both A and A' cations in the 2D Dion-Jacobson family, with the general formula (A')(A)Pb2Br7 ((A' = 3-(aminomethyl)Piperidinium (3AMP) and 4-(aminomethyl)Piperidinium) (4AMP); A = methylammonium (MA) and formamidinium (FA)). Mixing the spacing A' cations and perovskitizer A cations generates the new (3AMP)a(4AMP)1-a(FA)b(MA)1-bPb2Br7 perovskites. The crystallographically refined crystal structures using single-crystal X-ray diffraction data reveal that the distortion of the inorganic framework is heavily influenced by the degree of A' and A alloying. A rising fraction of 4AMP in the structure, decreases the Pb-Br-Pb angles, making the framework more distorted. On the contrary, higher FA fractions increase the Pb-Br-Pb angles. This structural evolution fine-tunes the optical properties where the larger the Pb-Br-Pb angle, the narrower the band gap. The photoluminescence emission energy mirrors this trend. Raman spectroscopy reveals a highly dynamical lattice similar to MAPbBr3 and consistent with the local distortion environment of the [Pb2Br7] framework. Density functional theory (DFT) calculations of the electronic structures reveal the same trend as the experimental results where (3AMP)(FA)Pb2Br7 has the smallest band gap while (4AMP)(MA)Pb2Br7 has the largest band gap. The structural effects from solely the organic cations in the 2D system highlight the importance of understanding the high sensitivity of the optoelectronic properties on the structural tuning in this broad class of materials.
-
hybrid dion jacobson 2d lead iodide perovskites
Journal of the American Chemical Society, 2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Mercouri G Kanatzidis, Laurent Pedesseau, Michael R WasielewskiAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3A...
-
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Laurent Pedesseau, Michael R Wasielewski, Mercouri G KanatzidisAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3AMP series having smaller band gaps than the 4AMP series. Analysis on the crystal structures and density functional theory (DFT) calculations suggest that the origin of the systematic band gap shift is the strong but indirect influence of the organic cation on the inorganic framework. Fabrication of photovoltaic devices utilizing these materials as light absorbers reveals that (3AMP)(MA)3Pb4I13 has the best power conversion efficiency (PCE) of 7.32%, which is much higher than that of the corresponding (4AMP)(MA)3Pb4I13
Claudine Katan - One of the best experts on this subject based on the ideXlab platform.
-
organic cation alloying on intralayer a and interlayer a sites in 2d hybrid dion jacobson lead bromide perovskites a a pb2br7
Journal of the American Chemical Society, 2020Co-Authors: Mikaa L Kepenekian, Ioannis Spanopoulos, Yihui He, Claudine Katan, Jacky Even, Richard D Schaller, Ram Seshadri, Constantinos C Stoumpos, Mercouri G KanatzidisAbstract:: Hybrid layered halide perovskites have achieved impressive performance in optoelectronics. New structural types in the two-dimensional (2D) halide system such as the Dion-Jacobson phases have attracted wide research attention due to the short interlayer distance and unique layer orientation that facilitate better charge-transport and higher stability in optoelectronic devices. Here, we report the first solid solution series incorporating both A and A' cations in the 2D Dion-Jacobson family, with the general formula (A')(A)Pb2Br7 ((A' = 3-(aminomethyl)Piperidinium (3AMP) and 4-(aminomethyl)Piperidinium) (4AMP); A = methylammonium (MA) and formamidinium (FA)). Mixing the spacing A' cations and perovskitizer A cations generates the new (3AMP)a(4AMP)1-a(FA)b(MA)1-bPb2Br7 perovskites. The crystallographically refined crystal structures using single-crystal X-ray diffraction data reveal that the distortion of the inorganic framework is heavily influenced by the degree of A' and A alloying. A rising fraction of 4AMP in the structure, decreases the Pb-Br-Pb angles, making the framework more distorted. On the contrary, higher FA fractions increase the Pb-Br-Pb angles. This structural evolution fine-tunes the optical properties where the larger the Pb-Br-Pb angle, the narrower the band gap. The photoluminescence emission energy mirrors this trend. Raman spectroscopy reveals a highly dynamical lattice similar to MAPbBr3 and consistent with the local distortion environment of the [Pb2Br7] framework. Density functional theory (DFT) calculations of the electronic structures reveal the same trend as the experimental results where (3AMP)(FA)Pb2Br7 has the smallest band gap while (4AMP)(MA)Pb2Br7 has the largest band gap. The structural effects from solely the organic cations in the 2D system highlight the importance of understanding the high sensitivity of the optoelectronic properties on the structural tuning in this broad class of materials.
-
hybrid dion jacobson 2d lead iodide perovskites
Journal of the American Chemical Society, 2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Mercouri G Kanatzidis, Laurent Pedesseau, Michael R WasielewskiAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3A...
-
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Laurent Pedesseau, Michael R Wasielewski, Mercouri G KanatzidisAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3AMP series having smaller band gaps than the 4AMP series. Analysis on the crystal structures and density functional theory (DFT) calculations suggest that the origin of the systematic band gap shift is the strong but indirect influence of the organic cation on the inorganic framework. Fabrication of photovoltaic devices utilizing these materials as light absorbers reveals that (3AMP)(MA)3Pb4I13 has the best power conversion efficiency (PCE) of 7.32%, which is much higher than that of the corresponding (4AMP)(MA)3Pb4I13
Constantinos C Stoumpos - One of the best experts on this subject based on the ideXlab platform.
-
organic cation alloying on intralayer a and interlayer a sites in 2d hybrid dion jacobson lead bromide perovskites a a pb2br7
Journal of the American Chemical Society, 2020Co-Authors: Mikaa L Kepenekian, Ioannis Spanopoulos, Yihui He, Claudine Katan, Jacky Even, Richard D Schaller, Ram Seshadri, Constantinos C Stoumpos, Mercouri G KanatzidisAbstract:: Hybrid layered halide perovskites have achieved impressive performance in optoelectronics. New structural types in the two-dimensional (2D) halide system such as the Dion-Jacobson phases have attracted wide research attention due to the short interlayer distance and unique layer orientation that facilitate better charge-transport and higher stability in optoelectronic devices. Here, we report the first solid solution series incorporating both A and A' cations in the 2D Dion-Jacobson family, with the general formula (A')(A)Pb2Br7 ((A' = 3-(aminomethyl)Piperidinium (3AMP) and 4-(aminomethyl)Piperidinium) (4AMP); A = methylammonium (MA) and formamidinium (FA)). Mixing the spacing A' cations and perovskitizer A cations generates the new (3AMP)a(4AMP)1-a(FA)b(MA)1-bPb2Br7 perovskites. The crystallographically refined crystal structures using single-crystal X-ray diffraction data reveal that the distortion of the inorganic framework is heavily influenced by the degree of A' and A alloying. A rising fraction of 4AMP in the structure, decreases the Pb-Br-Pb angles, making the framework more distorted. On the contrary, higher FA fractions increase the Pb-Br-Pb angles. This structural evolution fine-tunes the optical properties where the larger the Pb-Br-Pb angle, the narrower the band gap. The photoluminescence emission energy mirrors this trend. Raman spectroscopy reveals a highly dynamical lattice similar to MAPbBr3 and consistent with the local distortion environment of the [Pb2Br7] framework. Density functional theory (DFT) calculations of the electronic structures reveal the same trend as the experimental results where (3AMP)(FA)Pb2Br7 has the smallest band gap while (4AMP)(MA)Pb2Br7 has the largest band gap. The structural effects from solely the organic cations in the 2D system highlight the importance of understanding the high sensitivity of the optoelectronic properties on the structural tuning in this broad class of materials.
-
hybrid dion jacobson 2d lead iodide perovskites
Journal of the American Chemical Society, 2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Mercouri G Kanatzidis, Laurent Pedesseau, Michael R WasielewskiAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3A...
-
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Laurent Pedesseau, Michael R Wasielewski, Mercouri G KanatzidisAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3AMP series having smaller band gaps than the 4AMP series. Analysis on the crystal structures and density functional theory (DFT) calculations suggest that the origin of the systematic band gap shift is the strong but indirect influence of the organic cation on the inorganic framework. Fabrication of photovoltaic devices utilizing these materials as light absorbers reveals that (3AMP)(MA)3Pb4I13 has the best power conversion efficiency (PCE) of 7.32%, which is much higher than that of the corresponding (4AMP)(MA)3Pb4I13
Michael R Wasielewski - One of the best experts on this subject based on the ideXlab platform.
-
hybrid dion jacobson 2d lead iodide perovskites
Journal of the American Chemical Society, 2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Mercouri G Kanatzidis, Laurent Pedesseau, Michael R WasielewskiAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3A...
-
Hybrid Dion–Jacobson 2D Lead Iodide Perovskites
2018Co-Authors: Lingling Mao, Claudine Katan, Jacky Even, Constantinos C Stoumpos, Laurent Pedesseau, Michael R Wasielewski, Mercouri G KanatzidisAbstract:The three-dimensional hybrid organic–inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion–Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A′An–1PbnI3n+1 (A′ = 3-(aminomethyl)Piperidinium (3AMP) or 4-(aminomethyl)Piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3AMP series having smaller band gaps than the 4AMP series. Analysis on the crystal structures and density functional theory (DFT) calculations suggest that the origin of the systematic band gap shift is the strong but indirect influence of the organic cation on the inorganic framework. Fabrication of photovoltaic devices utilizing these materials as light absorbers reveals that (3AMP)(MA)3Pb4I13 has the best power conversion efficiency (PCE) of 7.32%, which is much higher than that of the corresponding (4AMP)(MA)3Pb4I13