The Experts below are selected from a list of 1623 Experts worldwide ranked by ideXlab platform
Villa Diego - One of the best experts on this subject based on the ideXlab platform.
-
A pactical tool for the hydro-acoustic optimization of naval Propellers
CIMNE, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri’s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri’s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company’s cluster, which operates under Linux.An ad-hoc ‘2D modeler’ has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
-
A practical tool for the hydro-acoustic optimization of naval Propellers
R. Bensow and J. Ringsberg, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri\u2019s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri\u2019s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company\u2019s cluster, which operates under Linux.An ad-hoc \u20182D modeler\u2019 has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
Valdenazzi Federica - One of the best experts on this subject based on the ideXlab platform.
-
A pactical tool for the hydro-acoustic optimization of naval Propellers
CIMNE, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri’s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri’s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company’s cluster, which operates under Linux.An ad-hoc ‘2D modeler’ has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
-
A practical tool for the hydro-acoustic optimization of naval Propellers
R. Bensow and J. Ringsberg, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri\u2019s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri\u2019s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company\u2019s cluster, which operates under Linux.An ad-hoc \u20182D modeler\u2019 has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
Vaccaro Cristina - One of the best experts on this subject based on the ideXlab platform.
-
A pactical tool for the hydro-acoustic optimization of naval Propellers
CIMNE, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri’s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri’s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company’s cluster, which operates under Linux.An ad-hoc ‘2D modeler’ has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
-
A practical tool for the hydro-acoustic optimization of naval Propellers
R. Bensow and J. Ringsberg, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri\u2019s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri\u2019s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company\u2019s cluster, which operates under Linux.An ad-hoc \u20182D modeler\u2019 has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
Grassi Davide - One of the best experts on this subject based on the ideXlab platform.
-
A pactical tool for the hydro-acoustic optimization of naval Propellers
CIMNE, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri’s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri’s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company’s cluster, which operates under Linux.An ad-hoc ‘2D modeler’ has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
-
A practical tool for the hydro-acoustic optimization of naval Propellers
R. Bensow and J. Ringsberg, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri\u2019s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri\u2019s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company\u2019s cluster, which operates under Linux.An ad-hoc \u20182D modeler\u2019 has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
Conti Francesco - One of the best experts on this subject based on the ideXlab platform.
-
A pactical tool for the hydro-acoustic optimization of naval Propellers
CIMNE, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri’s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri’s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company’s cluster, which operates under Linux.An ad-hoc ‘2D modeler’ has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
-
A practical tool for the hydro-acoustic optimization of naval Propellers
R. Bensow and J. Ringsberg, 2019Co-Authors: Valdenazzi Federica, Conti Francesco, Gaggero Stefano, Vaccaro Cristina, Grassi Davide, Villa DiegoAbstract:Propeller optimisation is always the focus of the Propeller Design Process, as such Process is aimed at finding the best compromise between often conflicting objectives accounting for many Design constraints. The use of optimization algorithms combined with blade shape modification techniques has been proposed by a number of research groups in the past few years and has proved to have a potential for practical applications, but integration in the everyday Propeller Design Process is still beyond to be so consolidated. In the past one and a half year, CETENA, University of Genoa and the Fincantieri\u2019s Naval Vessels Business unit have teamed to set up a Propeller optimization software environment to be used by Fincantieri\u2019s Propeller Designers in their everyday Design work. A specification of the optimisation environment was worked out based on an analysis of the current Design Process, in order for the new procedures and tools to allow continuity of current practices while offering new possibilities in the comparative investigation of Design variants and the identification of the very best Design solution.The resulting optimisation environment integrates different software tools and consists of three main components linked by JAVA script architecture: a software tool for blade shape modification and definition (1), a BEM code for the evaluation of the Propeller performance (2) and the open-source software DAKOTA to guide the optimisation (3).The software suite has been setup such as to be compatible with both Windows and Linux operating systems, in order to take advantage of all available computational resources, from single Windows workstations to the company\u2019s cluster, which operates under Linux.An ad-hoc \u20182D modeler\u2019 has been developed by the University of Genoa to model and modify the Propeller Design table, while a 3D modeller has been developed by CETENA to generate the 3D Propeller description suitable for CFD RANS computations, starting from the 2D Propeller Design curves. The Propeller performance is evaluated using CRS BEM code PROCAL and the CRS Empirical Tip Vortex model. Measures of merit usually include: the Propeller efficiency, pressure coefficients at specific locations on the blade back and face sides and, for an hydro-acoustic optimization, also the tip vortex induced pressure.The paper will provide details of the setup of the optimization environment focusing on an industrial application to Design by optimization a naval Propeller. The specific needs of the final users of the optimization suite will be highlighted and the expected benefits will be discussed, related to the time frame of the Design Process and the possibility of performing thorough investigations of Design variants
