The Experts below are selected from a list of 165 Experts worldwide ranked by ideXlab platform

Shahrul Naim Sidek - One of the best experts on this subject based on the ideXlab platform.

  • mechanical design and Simulation of two wheeled wheelchair using Solidworks
    IOP Conference Series: Materials Science and Engineering, 2013
    Co-Authors: Tareq Altalmas, Salmiah Ahmad, Abqori Aula, Rini Akmeliawati, Shahrul Naim Sidek
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

  • mechanical design and Simulation of wwo wheeled wheelchair using Solidworks
    2013
    Co-Authors: Altalmas Tareq M, Salmiah Ahmad, Rini Akmeliawati, Shahrul Naim Sidek, Abqori Aula
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

Abqori Aula - One of the best experts on this subject based on the ideXlab platform.

  • mechanical design and Simulation of two wheeled wheelchair using Solidworks
    IOP Conference Series: Materials Science and Engineering, 2013
    Co-Authors: Tareq Altalmas, Salmiah Ahmad, Abqori Aula, Rini Akmeliawati, Shahrul Naim Sidek
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

  • mechanical design and Simulation of wwo wheeled wheelchair using Solidworks
    2013
    Co-Authors: Altalmas Tareq M, Salmiah Ahmad, Rini Akmeliawati, Shahrul Naim Sidek, Abqori Aula
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

John R Steffen - One of the best experts on this subject based on the ideXlab platform.

  • machine elements using Solidworks Simulation 2009
    2009
    Co-Authors: John R Steffen
    Abstract:

    Engineering Analysis with Solidworks Simulation 2009 goes beyond the standard software manual because its unique approach concurrently introduces you to the Solidworks Simulation 2009 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of Solidworks Simulation. This book covers the following FEA functionality of Solidworks Simulation 2009: Linear static analysis of parts and assemblies Frequency (modal) analysis Buckling analysis Thermal analysis Drop test analysis Optimization analysis Nonlinear analysis Dynamic analysis Table of Contents Before You Start 1. Introduction 2. Static analysis of a plate 3. Static analysis of an L-bracket 4. Stress and frequency analysis of a thin plate 5. Static analysis of a link 6. Frequency analysis of a tuning fork 7. Thermal analysis of a pipeline component and heater 8. Thermal analysis of a heat sink 9. Static analysis of a hanger 10. Analysis of contact stress between two plates 11. Thermal stress analysis of a bi-metal beam 12. Buckling analysis of an L-beam 13. Design optimization of a plate in tension 14. Static analysis of a bracket using adaptive solution methods 15. Design sensitivity analysis of hinge supported beam 16. Drop test of a porcelain ring 17. Selected nonlinear problems 18. Mixed meshing problem 19. Analysis of a weldment using beam elements 20. Dynamic Analysis - Modal Time History and Harmonic 21. Analysis of random vibration 22. Miscellaneous topics 23. Implementation of FEA into the design process 24. Glossary of terms 25. Resources available to FEA Users

Rini Akmeliawati - One of the best experts on this subject based on the ideXlab platform.

  • mechanical design and Simulation of two wheeled wheelchair using Solidworks
    IOP Conference Series: Materials Science and Engineering, 2013
    Co-Authors: Tareq Altalmas, Salmiah Ahmad, Abqori Aula, Rini Akmeliawati, Shahrul Naim Sidek
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

  • mechanical design and Simulation of wwo wheeled wheelchair using Solidworks
    2013
    Co-Authors: Altalmas Tareq M, Salmiah Ahmad, Rini Akmeliawati, Shahrul Naim Sidek, Abqori Aula
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

Salmiah Ahmad - One of the best experts on this subject based on the ideXlab platform.

  • mechanical design and Simulation of two wheeled wheelchair using Solidworks
    IOP Conference Series: Materials Science and Engineering, 2013
    Co-Authors: Tareq Altalmas, Salmiah Ahmad, Abqori Aula, Rini Akmeliawati, Shahrul Naim Sidek
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight

  • mechanical design and Simulation of wwo wheeled wheelchair using Solidworks
    2013
    Co-Authors: Altalmas Tareq M, Salmiah Ahmad, Rini Akmeliawati, Shahrul Naim Sidek, Abqori Aula
    Abstract:

    This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using Solidworks Software. Nowadays, Solidworks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. Solidworks Simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight