The Experts below are selected from a list of 48 Experts worldwide ranked by ideXlab platform
Takanori Ichiki - One of the best experts on this subject based on the ideXlab platform.
-
measurement of the electrophoretic mobility of sheep erythrocytes using microcapillary chips
Electrophoresis, 2005Co-Authors: Fumihiro Omasu, Takanori Ichiki, Yuta NakanoAbstract:Cell electrophoretic mobility (EPM) can be used to characterize individual cells. The purpose of this study is to establish reproducible and reliable cell EPM values obtained using microcapillary electrophoresis (microCE) chips. We studied cell electrophoresis on microCE chips through the comprehensive measurement of EPM and zeta potential. The inner wall of microchannels in microCE chips was coated with three kinds of reagents, namely bovine serum albumin (BSA), gelatin, and 2-Methacryloyloxyethylphosphorylcholine (MPC) polymer to prevent nonspecific adhesion and interaction between cells and the inner wall. Electrophoresis was conducted in phosphate-buffered saline (pH 4-9) using erythrocytes extracted from sheep whole blood. Electroosmotic flow (EOF) mobility was measured using noncharged particles, and then the true EPM was calculated by subtracting the EOF mobility from the electromigration. MPC polymer coatings in microCE chips reduced the zeta potential of the inner wall and fully prevented nonspecific adhesion. EPM data obtained using microCE chips were almost the same and reproducible over a wide range of pH irrespective of the coating reagent used. In conclusion, reliability in the measurement of cell EPM using microCE chips was realized.
-
Electroosmosis injection of blood serum into biocompatible microcapillary chip fabricated on quartz plate
Electrophoresis, 2001Co-Authors: Akio Oki, Sakuichiro Adachi, Yoshitaka Ito, Yuzuru Takamura, Takanori Ichiki, Hiroki Ogawa, Kazuhiko Ishihara, Yasuhiro HoriikeAbstract:A chip which allows the detection of various human health markers from a trace amount of blood has been studied. As a goal, a microcapillary with a 30 x 30 microm cross-section was fabricated using all-dry etching technologies on a 2 x 2 cm SiO2 chip. The coating of the biocompatible 2-Methacryloyloxyethylphosphorylcholine (MPC) polymer on the inner quartz wall of the microcapillary demonstrated a sufficiently long adsorption suppression of proteins in the serum on the quartz surface, while rapid stopping occurred for serum injected into the microcapillary with a bare quartz surface. The latter rapid stopping corresponded well to fast electroosmosis flow due to the negatively increasing zeta-potential by the adsorption of proteins on the quartz surface. The electroosmosis pump arranged a downstream of the microcapillary was also developed to inject serum into it. As a preliminary application, a given concentration-standard solution was injected into the ion-sensitive field-effect transistor (ISFET) embedded in the chip, employing the electroosmosis pump arranged downstream of the sensor position. Hence, the pH and Na+ and K+ cation concentrations were measured.
Yasuhiro Horiike - One of the best experts on this subject based on the ideXlab platform.
-
Electroosmosis injection of blood serum into biocompatible microcapillary chip fabricated on quartz plate
Electrophoresis, 2001Co-Authors: Akio Oki, Sakuichiro Adachi, Yoshitaka Ito, Yuzuru Takamura, Takanori Ichiki, Hiroki Ogawa, Kazuhiko Ishihara, Yasuhiro HoriikeAbstract:A chip which allows the detection of various human health markers from a trace amount of blood has been studied. As a goal, a microcapillary with a 30 x 30 microm cross-section was fabricated using all-dry etching technologies on a 2 x 2 cm SiO2 chip. The coating of the biocompatible 2-Methacryloyloxyethylphosphorylcholine (MPC) polymer on the inner quartz wall of the microcapillary demonstrated a sufficiently long adsorption suppression of proteins in the serum on the quartz surface, while rapid stopping occurred for serum injected into the microcapillary with a bare quartz surface. The latter rapid stopping corresponded well to fast electroosmosis flow due to the negatively increasing zeta-potential by the adsorption of proteins on the quartz surface. The electroosmosis pump arranged a downstream of the microcapillary was also developed to inject serum into it. As a preliminary application, a given concentration-standard solution was injected into the ion-sensitive field-effect transistor (ISFET) embedded in the chip, employing the electroosmosis pump arranged downstream of the sensor position. Hence, the pH and Na+ and K+ cation concentrations were measured.
Akio Oki - One of the best experts on this subject based on the ideXlab platform.
-
Electroosmosis injection of blood serum into biocompatible microcapillary chip fabricated on quartz plate
Electrophoresis, 2001Co-Authors: Akio Oki, Sakuichiro Adachi, Yoshitaka Ito, Yuzuru Takamura, Takanori Ichiki, Hiroki Ogawa, Kazuhiko Ishihara, Yasuhiro HoriikeAbstract:A chip which allows the detection of various human health markers from a trace amount of blood has been studied. As a goal, a microcapillary with a 30 x 30 microm cross-section was fabricated using all-dry etching technologies on a 2 x 2 cm SiO2 chip. The coating of the biocompatible 2-Methacryloyloxyethylphosphorylcholine (MPC) polymer on the inner quartz wall of the microcapillary demonstrated a sufficiently long adsorption suppression of proteins in the serum on the quartz surface, while rapid stopping occurred for serum injected into the microcapillary with a bare quartz surface. The latter rapid stopping corresponded well to fast electroosmosis flow due to the negatively increasing zeta-potential by the adsorption of proteins on the quartz surface. The electroosmosis pump arranged a downstream of the microcapillary was also developed to inject serum into it. As a preliminary application, a given concentration-standard solution was injected into the ion-sensitive field-effect transistor (ISFET) embedded in the chip, employing the electroosmosis pump arranged downstream of the sensor position. Hence, the pH and Na+ and K+ cation concentrations were measured.
Fumihiro Omasu - One of the best experts on this subject based on the ideXlab platform.
-
measurement of the electrophoretic mobility of sheep erythrocytes using microcapillary chips
Electrophoresis, 2005Co-Authors: Fumihiro Omasu, Takanori Ichiki, Yuta NakanoAbstract:Cell electrophoretic mobility (EPM) can be used to characterize individual cells. The purpose of this study is to establish reproducible and reliable cell EPM values obtained using microcapillary electrophoresis (microCE) chips. We studied cell electrophoresis on microCE chips through the comprehensive measurement of EPM and zeta potential. The inner wall of microchannels in microCE chips was coated with three kinds of reagents, namely bovine serum albumin (BSA), gelatin, and 2-Methacryloyloxyethylphosphorylcholine (MPC) polymer to prevent nonspecific adhesion and interaction between cells and the inner wall. Electrophoresis was conducted in phosphate-buffered saline (pH 4-9) using erythrocytes extracted from sheep whole blood. Electroosmotic flow (EOF) mobility was measured using noncharged particles, and then the true EPM was calculated by subtracting the EOF mobility from the electromigration. MPC polymer coatings in microCE chips reduced the zeta potential of the inner wall and fully prevented nonspecific adhesion. EPM data obtained using microCE chips were almost the same and reproducible over a wide range of pH irrespective of the coating reagent used. In conclusion, reliability in the measurement of cell EPM using microCE chips was realized.
Sakuichiro Adachi - One of the best experts on this subject based on the ideXlab platform.
-
Electroosmosis injection of blood serum into biocompatible microcapillary chip fabricated on quartz plate
Electrophoresis, 2001Co-Authors: Akio Oki, Sakuichiro Adachi, Yoshitaka Ito, Yuzuru Takamura, Takanori Ichiki, Hiroki Ogawa, Kazuhiko Ishihara, Yasuhiro HoriikeAbstract:A chip which allows the detection of various human health markers from a trace amount of blood has been studied. As a goal, a microcapillary with a 30 x 30 microm cross-section was fabricated using all-dry etching technologies on a 2 x 2 cm SiO2 chip. The coating of the biocompatible 2-Methacryloyloxyethylphosphorylcholine (MPC) polymer on the inner quartz wall of the microcapillary demonstrated a sufficiently long adsorption suppression of proteins in the serum on the quartz surface, while rapid stopping occurred for serum injected into the microcapillary with a bare quartz surface. The latter rapid stopping corresponded well to fast electroosmosis flow due to the negatively increasing zeta-potential by the adsorption of proteins on the quartz surface. The electroosmosis pump arranged a downstream of the microcapillary was also developed to inject serum into it. As a preliminary application, a given concentration-standard solution was injected into the ion-sensitive field-effect transistor (ISFET) embedded in the chip, employing the electroosmosis pump arranged downstream of the sensor position. Hence, the pH and Na+ and K+ cation concentrations were measured.
