The Experts below are selected from a list of 9069 Experts worldwide ranked by ideXlab platform

J.ma. Rincón - One of the best experts on this subject based on the ideXlab platform.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.Peer reviewe

Manuel Miguel Jordán - One of the best experts on this subject based on the ideXlab platform.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.Peer reviewe

  • Firing transformations of Tertiary clays used in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2001
    Co-Authors: Manuel Miguel Jordán, Teófilo Sanfeliu, C. De La Fuente
    Abstract:

    The mineralogical transformations during the firing of six different raw materials used in Ceramic Tile manufacturing have been studied. Test samples have been prepared by extrusion and fired in the range of 800–1150°C. Analysis of the fired samples was carried out by X-ray diffraction (XRD). The presence of augite, gehlenite, hematite, spinel, wollastonite and abundant vitreous phase showed neomineralization. Mixtures of illitic clays containing abundant CaCO3 form gehlenite, wollastonite and anorthitic plagioclases above 950°C. Samples poor in CaCO3 give a simple mineralogical composition of quartz and hematite.

M Romero - One of the best experts on this subject based on the ideXlab platform.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.Peer reviewe

María Belén Almendro-candel - One of the best experts on this subject based on the ideXlab platform.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.

  • Application of sewage sludge in the manufacturing of Ceramic Tile bodies
    Applied Clay Science, 2005
    Co-Authors: Manuel Miguel Jordán, María Belén Almendro-candel, M Romero, J.ma. Rincón
    Abstract:

    The substitution of clayey raw materials urban sewage sludge in the production of traditional Ceramics could give place to a cost saving due to the utilisation of wastes as secondary raw material. At the same time, it can help to solve the environmental problems associated to such wastes. This research shows the results of the substitution of clay for sewage sludge in different proportions in a Ceramic body. The sludge characterisation has been carried out by an analytical protocol. After that, the most suitable products were selected regarding to the chemical composition and the technological characterisation of the resulting Ceramic material.Peer reviewe

M M Alemany Diaz - One of the best experts on this subject based on the ideXlab platform.

  • Fuzzy multi-objective optimisation for master planning in a Ceramic supply chain
    International Journal of Production Research, 2011
    Co-Authors: David Peidro, M M Alemany Diaz, Josefa Mula, F Lario
    Abstract:

    In this paper, we consider the master planning problem for a centralised replenishment, production and distribution Ceramic Tile supply chain. A fuzzy multi-objective linear programming (FMOLP) approach is presented which considers the maximisation of the fuzzy gross margin, the minimisation of the fuzzy idle time and the minimisation of the fuzzy backorder quantities. By using an interactive solution methodology to convert this FMOLP model into an auxiliary crisp single-objective linear model, a preferred compromise solution is obtained. For illustration purposes, an example based on modifications of real-world industrial problems is used.

  • Mathematical programming model for centralised master planning in Ceramic Tile supply chains
    International Journal of Production Research, 2010
    Co-Authors: M M Alemany Diaz, Jorge Boj Viudez, Josefa Mula Bru, F C L Esteban
    Abstract:

    The object of this article is to develop a centralised replenishment, production, and distribution model for Ceramic Tile supply chains. These supply chains are assumed to be multi-item, multi-supplier, multi-facility, multi-type and multi-level distribution centres. The model deals with multi-period master planning where sourcing considerations for replenishments, production facilities, and distribution centres are important to maximise an objective function involving the total net profit. This model is deterministic and has been formulated as a mixed-integer linear programming (MILP) model. An example based on modifications of real-world industrial problems is presented.