The Experts below are selected from a list of 24 Experts worldwide ranked by ideXlab platform
Chiechi, Ryan C - One of the best experts on this subject based on the ideXlab platform.
-
In-Place Modulation of Rectification in Tunneling Junctions Comprising Self-Assembled Monolayers
2018Co-Authors: Ai Yong, Kovalchuk Andrii, Qiu Xinkai, Zhang Yanxi, Kumar Sumit, Wang Xintai, Kühnel Martin, Nørgaard Kasper, Chiechi, Ryan CAbstract:This paper describes tunneling junctions comprising self-assembled monolayers that can be converted between resistor and diode functionality in-place. The rectification ratio is affected by the hydration of densely packed carboxylic acid groups at the interface between the top-contact and the monolayer. We studied this process by treatment with water and a water scavenger using three different top-contacts, eutectic Ga-In (EGaIn), conducting-probe atomic force microscopy (CP-AFM), and reduced graphene oxide (rGO), demonstrating that the phenomena is molecular in nature and is not platform-speciffc. We propose a mechanism in which the tunneling junctions convert to diode behavior through the lowering of the LUMO, which is suffcient to bring it close to resonance at positive bias, potentially assisted by a Stark shift. This shift in energy is supported by calculations and a change in polarization observed by X-ray photoelectron spectroscopy and Kelvin probe measurements. We demonstrate light-driven modulation using spiropyran as a photoacid, suggesting that any chemical process that is coupled to the release of small molecules that can tightly bind carboxylic acid groups can be used as an external stimulus to modulate rectification. The ability to convert a tunneling junction reversibly between a diode and a resistor via an effect that is intrinsic to the molecules in the junction extends the possible applications of Molecular Electronics to reconfigurable circuits and other new functionalities that do not have Direct Analogs in conventional semiconductor devices
Ryan C. Chiechi - One of the best experts on this subject based on the ideXlab platform.
-
In-Place Modulation of Rectification in Tunneling Junctions Comprising Self-Assembled Monolayers
2018Co-Authors: Andrii Kovalchuk, Xinkai Qiu, Yanxi Zhang, Sumit Kumar, Xintai Wang, Martin Kühnel, Kasper Nørgaard, Ryan C. ChiechiAbstract:This paper describes tunneling junctions comprising self-assembled monolayers that can be converted between resistor and diode functionality in-place. The rectification ratio is affected by the hydration of densely packed carboxylic acid groups at the interface between the top-contact and the monolayer. We studied this process by treatment with water and a water scavenger using three different top-contacts, eutectic Ga–In (EGaIn), conducting-probe atomic force microscopy (CP-AFM), and reduced graphene oxide (rGO), demonstrating that the phenomena is molecular in nature and is not platform-speciffc. We propose a mechanism in which the tunneling junctions convert to diode behavior through the lowering of the LUMO, which is suffcient to bring it close to resonance at positive bias, potentially assisted by a Stark shift. This shift in energy is supported by calculations and a change in polarization observed by X-ray photoelectron spectroscopy and Kelvin probe measurements. We demonstrate light-driven modulation using spiropyran as a photoacid, suggesting that any chemical process that is coupled to the release of small molecules that can tightly bind carboxylic acid groups can be used as an external stimulus to modulate rectification. The ability to convert a tunneling junction reversibly between a diode and a resistor via an effect that is intrinsic to the molecules in the junction extends the possible applications of Molecular Electronics to reconfigurable circuits and other new functionalities that do not have Direct Analogs in conventional semiconductor devices
Ai Yong - One of the best experts on this subject based on the ideXlab platform.
-
In-Place Modulation of Rectification in Tunneling Junctions Comprising Self-Assembled Monolayers
2018Co-Authors: Ai Yong, Kovalchuk Andrii, Qiu Xinkai, Zhang Yanxi, Kumar Sumit, Wang Xintai, Kühnel Martin, Nørgaard Kasper, Chiechi, Ryan CAbstract:This paper describes tunneling junctions comprising self-assembled monolayers that can be converted between resistor and diode functionality in-place. The rectification ratio is affected by the hydration of densely packed carboxylic acid groups at the interface between the top-contact and the monolayer. We studied this process by treatment with water and a water scavenger using three different top-contacts, eutectic Ga-In (EGaIn), conducting-probe atomic force microscopy (CP-AFM), and reduced graphene oxide (rGO), demonstrating that the phenomena is molecular in nature and is not platform-speciffc. We propose a mechanism in which the tunneling junctions convert to diode behavior through the lowering of the LUMO, which is suffcient to bring it close to resonance at positive bias, potentially assisted by a Stark shift. This shift in energy is supported by calculations and a change in polarization observed by X-ray photoelectron spectroscopy and Kelvin probe measurements. We demonstrate light-driven modulation using spiropyran as a photoacid, suggesting that any chemical process that is coupled to the release of small molecules that can tightly bind carboxylic acid groups can be used as an external stimulus to modulate rectification. The ability to convert a tunneling junction reversibly between a diode and a resistor via an effect that is intrinsic to the molecules in the junction extends the possible applications of Molecular Electronics to reconfigurable circuits and other new functionalities that do not have Direct Analogs in conventional semiconductor devices
Andrii Kovalchuk - One of the best experts on this subject based on the ideXlab platform.
-
In-Place Modulation of Rectification in Tunneling Junctions Comprising Self-Assembled Monolayers
2018Co-Authors: Andrii Kovalchuk, Xinkai Qiu, Yanxi Zhang, Sumit Kumar, Xintai Wang, Martin Kühnel, Kasper Nørgaard, Ryan C. ChiechiAbstract:This paper describes tunneling junctions comprising self-assembled monolayers that can be converted between resistor and diode functionality in-place. The rectification ratio is affected by the hydration of densely packed carboxylic acid groups at the interface between the top-contact and the monolayer. We studied this process by treatment with water and a water scavenger using three different top-contacts, eutectic Ga–In (EGaIn), conducting-probe atomic force microscopy (CP-AFM), and reduced graphene oxide (rGO), demonstrating that the phenomena is molecular in nature and is not platform-speciffc. We propose a mechanism in which the tunneling junctions convert to diode behavior through the lowering of the LUMO, which is suffcient to bring it close to resonance at positive bias, potentially assisted by a Stark shift. This shift in energy is supported by calculations and a change in polarization observed by X-ray photoelectron spectroscopy and Kelvin probe measurements. We demonstrate light-driven modulation using spiropyran as a photoacid, suggesting that any chemical process that is coupled to the release of small molecules that can tightly bind carboxylic acid groups can be used as an external stimulus to modulate rectification. The ability to convert a tunneling junction reversibly between a diode and a resistor via an effect that is intrinsic to the molecules in the junction extends the possible applications of Molecular Electronics to reconfigurable circuits and other new functionalities that do not have Direct Analogs in conventional semiconductor devices
Berben, Louise A - One of the best experts on this subject based on the ideXlab platform.
-
A pendant proton shuttle on [Fe4N(CO)12]- alters product selectivity in formate vs. H2 production via the hydride [H-Fe4N(CO)12].
eScholarship University of California, 2016Co-Authors: Loewen, Natalia D, Thompson, Emily J, Kagan Michael, Banales, Carolina L, Myers, Thomas W, Fettinger, James C, Berben, Louise AAbstract:Proton relays are known to increase reaction rates for H2 evolution and lower overpotentials in electrocatalytic reactions. In this report we describe two electrocatalysts, [Fe4N(CO)11(PPh3)]- (1-) which has no proton relay, and hydroxyl-containing [Fe4N(CO)11(Ph2P(CH2)2OH)]- (2-). Solid state structures indicate that these phosphine-substituted clusters are Direct Analogs of [Fe4N(CO)12]- where one CO ligand has been replaced by a phosphine. We show that the proton relay changes the selectivity of reactions: CO2 is reduced selectively to formate by 1- in the absence of a relay, and protons are reduced to H2 under a CO2 atmosphere by 2-. These results implicate a hydride intermediate in the mechanism of the reactions and demonstrate the importance of controlling proton delivery to control product selectivity. Thermochemical measurements performed using infrared spectroelectrochemistry provided pKa and hydricity values for [HFe4N(CO)11(PPh3)]-, which are 23.7, and 45.5 kcal mol-1, respectively. The pKa of the hydroxyl group in 2- was determined to fall between 29 and 41, and this suggests that the proximity of the proton relay to the active catalytic site plays a significant role in the product selectivity observed, since the acidity alone does not account for the observed results. More generally, this work emphasizes the importance of substrate delivery kinetics in determining the selectivity of CO2 reduction reactions that proceed through metal-hydride intermediates