The Experts below are selected from a list of 243864 Experts worldwide ranked by ideXlab platform

Gibergans Bàguena José - One of the best experts on this subject based on the ideXlab platform.

  • A recent Electronic Control circuit to a throttle device
    'MDPI AG', 2020
    Co-Authors: Acho Zuppa Leonardo, Pujol Vázquez Gisela, Gibergans Bàguena José
    Abstract:

    The main objective of this paper is to conceive a recent Electronic Control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different Control strategies recently reported, an easy to implement Control scheme is an open research topic in the analog Electronic engineering field. Hence, by using the nonlinear dwell switching Control theory, an analog Electronic Control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable Controllers, the resultant closed-loop system is enough robust to the Control objective This fact is experimentally evidenced. The proposed Electronic Controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an Electronic Control circuit to the throttle device.Peer ReviewedPostprint (published version

  • A recent Electronic Control circuit to a throttle device
    'MDPI AG', 2020
    Co-Authors: Acho Zuppa Leonardo, Pujol Vázquez Gisela, Gibergans Bàguena José
    Abstract:

    The main objective of this paper is to conceive a recent Electronic Control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different Control strategies recently reported, an easy to implement Control scheme is an open research topic in the analog Electronic engineering field. Hence, by using the nonlinear dwell switching Control theory, an analog Electronic Control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable Controllers, the resultant closed-loop system is enough robust to the Control objective This fact is experimentally evidenced. The proposed Electronic Controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an Electronic Control circuit to the throttle device.Peer Reviewe

Acho Zuppa Leonardo - One of the best experts on this subject based on the ideXlab platform.

  • A recent Electronic Control circuit to a throttle device
    'MDPI AG', 2020
    Co-Authors: Acho Zuppa Leonardo, Pujol Vázquez Gisela, Gibergans Bàguena José
    Abstract:

    The main objective of this paper is to conceive a recent Electronic Control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different Control strategies recently reported, an easy to implement Control scheme is an open research topic in the analog Electronic engineering field. Hence, by using the nonlinear dwell switching Control theory, an analog Electronic Control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable Controllers, the resultant closed-loop system is enough robust to the Control objective This fact is experimentally evidenced. The proposed Electronic Controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an Electronic Control circuit to the throttle device.Peer ReviewedPostprint (published version

  • A recent Electronic Control circuit to a throttle device
    'MDPI AG', 2020
    Co-Authors: Acho Zuppa Leonardo, Pujol Vázquez Gisela, Gibergans Bàguena José
    Abstract:

    The main objective of this paper is to conceive a recent Electronic Control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different Control strategies recently reported, an easy to implement Control scheme is an open research topic in the analog Electronic engineering field. Hence, by using the nonlinear dwell switching Control theory, an analog Electronic Control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable Controllers, the resultant closed-loop system is enough robust to the Control objective This fact is experimentally evidenced. The proposed Electronic Controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an Electronic Control circuit to the throttle device.Peer Reviewe

Pak Kin Wong - One of the best experts on this subject based on the ideXlab platform.

  • case based adaptation for automotive engine Electronic Control unit calibration
    Expert Systems With Applications, 2010
    Co-Authors: Chiman Vong, Pak Kin Wong
    Abstract:

    The automotive engine performance is greatly affected by the calibration of its Electronic Control unit (ECU). The method for ECU calibration is traditionally done by trial-and-error. This traditional method consumes a large amount of time and money. To resolve this problem, case-based reasoning (CBR) is employed, so that an existing and effective ECU setup can be adapted to fit another similar class of engines. The adaptation procedure is done through a more sophisticated step called case-based adaptation (CBA) (Craw, Jarmulak, & Rowe, 2001; Craw, Wiratunga, & Rowe, 2006; Leake, Kinley, & Wilson, 1996, 1997). CBA is an effective knowledge management tool, which can interactively learn the expert adaptation knowledge. The paper briefly reviews the methodologies of CBR and CBA. Then the application to ECU calibration is described via a case study. With CBR and CBA, the efficiency of calibrating an ECU can be enhanced. A prototype system has also been developed to verify the usefulness of CBR in ECU calibration.

Wongpak-kin - One of the best experts on this subject based on the ideXlab platform.

Pujol Vázquez Gisela - One of the best experts on this subject based on the ideXlab platform.

  • A recent Electronic Control circuit to a throttle device
    'MDPI AG', 2020
    Co-Authors: Acho Zuppa Leonardo, Pujol Vázquez Gisela, Gibergans Bàguena José
    Abstract:

    The main objective of this paper is to conceive a recent Electronic Control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different Control strategies recently reported, an easy to implement Control scheme is an open research topic in the analog Electronic engineering field. Hence, by using the nonlinear dwell switching Control theory, an analog Electronic Control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable Controllers, the resultant closed-loop system is enough robust to the Control objective This fact is experimentally evidenced. The proposed Electronic Controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an Electronic Control circuit to the throttle device.Peer ReviewedPostprint (published version

  • A recent Electronic Control circuit to a throttle device
    'MDPI AG', 2020
    Co-Authors: Acho Zuppa Leonardo, Pujol Vázquez Gisela, Gibergans Bàguena José
    Abstract:

    The main objective of this paper is to conceive a recent Electronic Control circuit to the throttle device. The throttle mechanical actuator is the most important part in an automotive gasoline engine. Among the different Control strategies recently reported, an easy to implement Control scheme is an open research topic in the analog Electronic engineering field. Hence, by using the nonlinear dwell switching Control theory, an analog Electronic Control unit is proposed to manipulate an automotive throttle plate. Due to the switching mechanism is commuting between a stable and an unstable Controllers, the resultant closed-loop system is enough robust to the Control objective This fact is experimentally evidenced. The proposed Electronic Controller uses operational amplifiers along with an Arduino unit. This unit is just employed to generate the related switching signal that can be replaced by using, for instance, the timer IC555. Thus, this study is a contribution on design and realization of an Electronic Control circuit to the throttle device.Peer Reviewe