Integrated Circuits

14,000,000 Leading Edge Experts on the ideXlab platform

Scan Science and Technology

Contact Leading Edge Experts & Companies

Scan Science and Technology

Contact Leading Edge Experts & Companies

The Experts below are selected from a list of 100476 Experts worldwide ranked by ideXlab platform

Lian-mao Peng - One of the best experts on this subject based on the ideXlab platform.

  • cmos based carbon nanotube pass transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Weiwei Zhou, Zhiyong Zhang, Yan Li, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors fabricated from carbon nanotubes have been investigated extensively over the past two decades. This study demonstrates a nanotube-based Integrated circuit design that substantially improves the speed and power consumption with respect to silicon-based Integrated Circuits.

  • CMOS-based carbon nanotube pass-transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Tian Pei, Weiwei Zhou, Zhiyong Zhang, Yan Li, Jie Liu, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for Integrated Circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based Integrated Circuits based on a pass-transistor logic configuration, rather than a complementary metal-oxide semiconductor configuration. Logic gates are constructed on individual carbon nanotubes via a doping-free approach and with a single power supply at voltages as low as 0.4 V. The pass-transistor logic configurarion provides a significant simplification of the carbon nanotube-based circuit design, a higher potential circuit speed and a significant reduction in power consumption. In particular, a full adder, which requires a total of 28 field-effect transistors to construct in the usual complementary metal-oxide semiconductor circuit, uses only three pairs of n- and p-field-effect transistors in the pass-transistor logic configuration.

Li Ding - One of the best experts on this subject based on the ideXlab platform.

  • cmos based carbon nanotube pass transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Weiwei Zhou, Zhiyong Zhang, Yan Li, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors fabricated from carbon nanotubes have been investigated extensively over the past two decades. This study demonstrates a nanotube-based Integrated circuit design that substantially improves the speed and power consumption with respect to silicon-based Integrated Circuits.

  • CMOS-based carbon nanotube pass-transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Tian Pei, Weiwei Zhou, Zhiyong Zhang, Yan Li, Jie Liu, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for Integrated Circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based Integrated Circuits based on a pass-transistor logic configuration, rather than a complementary metal-oxide semiconductor configuration. Logic gates are constructed on individual carbon nanotubes via a doping-free approach and with a single power supply at voltages as low as 0.4 V. The pass-transistor logic configurarion provides a significant simplification of the carbon nanotube-based circuit design, a higher potential circuit speed and a significant reduction in power consumption. In particular, a full adder, which requires a total of 28 field-effect transistors to construct in the usual complementary metal-oxide semiconductor circuit, uses only three pairs of n- and p-field-effect transistors in the pass-transistor logic configuration.

Zhiyong Zhang - One of the best experts on this subject based on the ideXlab platform.

  • cmos based carbon nanotube pass transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Weiwei Zhou, Zhiyong Zhang, Yan Li, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors fabricated from carbon nanotubes have been investigated extensively over the past two decades. This study demonstrates a nanotube-based Integrated circuit design that substantially improves the speed and power consumption with respect to silicon-based Integrated Circuits.

  • CMOS-based carbon nanotube pass-transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Tian Pei, Weiwei Zhou, Zhiyong Zhang, Yan Li, Jie Liu, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for Integrated Circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based Integrated Circuits based on a pass-transistor logic configuration, rather than a complementary metal-oxide semiconductor configuration. Logic gates are constructed on individual carbon nanotubes via a doping-free approach and with a single power supply at voltages as low as 0.4 V. The pass-transistor logic configurarion provides a significant simplification of the carbon nanotube-based circuit design, a higher potential circuit speed and a significant reduction in power consumption. In particular, a full adder, which requires a total of 28 field-effect transistors to construct in the usual complementary metal-oxide semiconductor circuit, uses only three pairs of n- and p-field-effect transistors in the pass-transistor logic configuration.

Weiwei Zhou - One of the best experts on this subject based on the ideXlab platform.

  • cmos based carbon nanotube pass transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Weiwei Zhou, Zhiyong Zhang, Yan Li, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors fabricated from carbon nanotubes have been investigated extensively over the past two decades. This study demonstrates a nanotube-based Integrated circuit design that substantially improves the speed and power consumption with respect to silicon-based Integrated Circuits.

  • CMOS-based carbon nanotube pass-transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Tian Pei, Weiwei Zhou, Zhiyong Zhang, Yan Li, Jie Liu, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for Integrated Circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based Integrated Circuits based on a pass-transistor logic configuration, rather than a complementary metal-oxide semiconductor configuration. Logic gates are constructed on individual carbon nanotubes via a doping-free approach and with a single power supply at voltages as low as 0.4 V. The pass-transistor logic configurarion provides a significant simplification of the carbon nanotube-based circuit design, a higher potential circuit speed and a significant reduction in power consumption. In particular, a full adder, which requires a total of 28 field-effect transistors to construct in the usual complementary metal-oxide semiconductor circuit, uses only three pairs of n- and p-field-effect transistors in the pass-transistor logic configuration.

Sheng Wang - One of the best experts on this subject based on the ideXlab platform.

  • cmos based carbon nanotube pass transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Weiwei Zhou, Zhiyong Zhang, Yan Li, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors fabricated from carbon nanotubes have been investigated extensively over the past two decades. This study demonstrates a nanotube-based Integrated circuit design that substantially improves the speed and power consumption with respect to silicon-based Integrated Circuits.

  • CMOS-based carbon nanotube pass-transistor logic Integrated Circuits
    Nature Communications, 2012
    Co-Authors: Li Ding, Shibo Liang, Tian Pei, Weiwei Zhou, Zhiyong Zhang, Yan Li, Jie Liu, Sheng Wang, Lian-mao Peng
    Abstract:

    Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for Integrated Circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based Integrated Circuits based on a pass-transistor logic configuration, rather than a complementary metal-oxide semiconductor configuration. Logic gates are constructed on individual carbon nanotubes via a doping-free approach and with a single power supply at voltages as low as 0.4 V. The pass-transistor logic configurarion provides a significant simplification of the carbon nanotube-based circuit design, a higher potential circuit speed and a significant reduction in power consumption. In particular, a full adder, which requires a total of 28 field-effect transistors to construct in the usual complementary metal-oxide semiconductor circuit, uses only three pairs of n- and p-field-effect transistors in the pass-transistor logic configuration.