The Experts below are selected from a list of 888 Experts worldwide ranked by ideXlab platform
Georgiades A. - One of the best experts on this subject based on the ideXlab platform.
-
Analysis of Smart Piezo-Magneto-Thermo-Elastic Composite and Reinforced Plates: Part II – Applications
De Gruyter, 2014Co-Authors: Hadjiloizi D. A., Kalamkarov A.l., Georgiades A.Abstract:A comprehensive micromechanical model for the analysis of a smart composite piezo-magneto-thermoelastic thin plate with rapidly varying thickness is developed in Part I of thiswork. The asymptotichomogenization model is developed using static equilibrium equations and the quasi-static approximation of Maxwell’s equations. The work culminates in the derivation of general expressions for effective elastic, piezoelectric, piezomagnetic, dielectric permittivity and other coefficients. Among these coefficients, the so-called product coefficients are determined which are present in the behavior of the macroscopic composite as a result of the interactions between the various phases but can be absent from the constitutive behavior of some individual phases of the composite structure. The model is comprehensive enough to also allow for calculation of the local fields of mechanical stresses, electric displacement and magnetic induction. The present paper determines the effective properties of constant thickness laminates comprised of monoclinic Materials or orthotropic Materials which are rotated with respect to their Principal Material Coordinate system. A further example illustrates the determination of the effective properties of wafer-type magnetoelectric composite plates reinforced with smart ribs or stiffeners oriented along the tangential directions of the plate. For generality, it is assumed that the ribs and the base plate are made of different orthotropic Materials. It is shown in this work that for the purely elastic case the results of the derived model converge exactly to previously established models. However, in the more general case where some or all of the phases exhibit piezoelectric and/or piezomagnetic behavior, the expressions for the derived effective coefficients are shown to be dependent on not only the elastic properties but also on the piezoelectric and piezomagnetic parameters of the constituent Materials. Thus, the results presented here represent a significant refinement of previously obtained results
Georgiades Tasos - One of the best experts on this subject based on the ideXlab platform.
-
Analysis of Smart Piezo-magneto-thermo-elastic composite and reinforced plates: Part II - Applications
'Walter de Gruyter GmbH', 2014Co-Authors: Hadjiloizi Demetra, Kalamkarov A. L., Ch Metti, Georgiades TasosAbstract:A comprehensive micromechanical model for the analysis of a smart composite piezo-magneto-thermoelastic thin plate with rapidly varying thickness is developed in Part I of thiswork. The asymptotichomogenization model is developed using static equilibrium equations and the quasi-static approximation of Maxwell's equations. The work culminates in the derivation of general expressions for effective elastic, piezoelectric, piezomagnetic, dielectric permittivity and other coefficients. Among these coefficients, the so-called product coefficients are determined which are present in the behavior of the macroscopic composite as a result of the interactions between the various phases but can be absent from the constitutive behavior of some individual phases of the composite structure. The model is comprehensive enough to also allow for calculation of the local fields of mechanical stresses, electric displacement and magnetic induction. The present paper determines the effective properties of constant thickness laminates comprised of monoclinic Materials or orthotropic Materials which are rotated with respect to their Principal Material Coordinate system. A further example illustrates the determination of the effective properties of wafer-type magnetoelectric composite plates reinforced with smart ribs or stiffeners oriented along the tangential directions of the plate. For generality, it is assumed that the ribs and the base plate are made of different orthotropic Materials. It is shown in this work that for the purely elastic case the results of the derived model converge exactly to previously established models. However, in the more general case where some or all of the phases exhibit piezoelectric and/or piezomagnetic behavior, the expressions for the derived effective coefficients are shown to be dependent on not only the elastic properties but also on the piezoelectric and piezomagnetic parameters of the constituent Materials. Thus, the results presented here represent a significant refinement of previously obtained results
Liu Liu - One of the best experts on this subject based on the ideXlab platform.
-
experimental and numerical investigation of progressive damage and failure behavior for 2 5d woven alumina fiber silica matrix composites under a complex in plane stress state
Composite Structures, 2021Co-Authors: Linlin Deng, Ziqing Hao, Lei Zhang, Liu LiuAbstract:Abstract The focus of this work is to characterize the progressive damage and failure behavior of 2.5D woven alumina fiber reinforced silica ceramic matrix thin composite specimen under a planar tension-shear stress state. The tensile and shear stress–strain diagrams in the Principal Material Coordinate system were obtained using the off-axis tension test with the digital image correlation technique. A mesoscale finite element model of the composite Material was developed within the framework of continuum damage mechanics. The thickness effect on the macroscopic mechanical response was considered by removing the periodic boundary conditions along the thickness direction. The macroscopic stress–strain response given by the numerical model was validated by the experimental results. The interaction of the planar biaxial tension and shear stresses was taken into account in the model, quantified using a shear contribution coefficient in the modified 3D Hashin failure criterion. The results from the damage evolution analysis indicate that the linear tensile stress–strain response with a brittle fracture characteristic for the on-axis tension specimen is governed by the axial fiber bundle. The nonlinear tensile stress–strain response with the significantly reduced ultimate stress under biaxial tension and shear stress state results from multiple damages with evolution in both axial and transverse fiber bundles. Both the effective tensile modulus and the ultimate tensile strength increase with increasing the thickness of the specimen due to the increase of the fiber volume fraction. The strengthening induced by the size effect is less significant for the specimen under biaxial tension and shear stress state than that for the on-axis tension specimen owing to the involvement of shear response dominated by the matrix of the Material. The results of this study provide new insight into the failure of 2.5D woven ceramic-based composite Material, which contributes to the optimal design of the reusable thermal protection system structure.
Hadjiloizi D. A. - One of the best experts on this subject based on the ideXlab platform.
-
Analysis of Smart Piezo-Magneto-Thermo-Elastic Composite and Reinforced Plates: Part II – Applications
De Gruyter, 2014Co-Authors: Hadjiloizi D. A., Kalamkarov A.l., Georgiades A.Abstract:A comprehensive micromechanical model for the analysis of a smart composite piezo-magneto-thermoelastic thin plate with rapidly varying thickness is developed in Part I of thiswork. The asymptotichomogenization model is developed using static equilibrium equations and the quasi-static approximation of Maxwell’s equations. The work culminates in the derivation of general expressions for effective elastic, piezoelectric, piezomagnetic, dielectric permittivity and other coefficients. Among these coefficients, the so-called product coefficients are determined which are present in the behavior of the macroscopic composite as a result of the interactions between the various phases but can be absent from the constitutive behavior of some individual phases of the composite structure. The model is comprehensive enough to also allow for calculation of the local fields of mechanical stresses, electric displacement and magnetic induction. The present paper determines the effective properties of constant thickness laminates comprised of monoclinic Materials or orthotropic Materials which are rotated with respect to their Principal Material Coordinate system. A further example illustrates the determination of the effective properties of wafer-type magnetoelectric composite plates reinforced with smart ribs or stiffeners oriented along the tangential directions of the plate. For generality, it is assumed that the ribs and the base plate are made of different orthotropic Materials. It is shown in this work that for the purely elastic case the results of the derived model converge exactly to previously established models. However, in the more general case where some or all of the phases exhibit piezoelectric and/or piezomagnetic behavior, the expressions for the derived effective coefficients are shown to be dependent on not only the elastic properties but also on the piezoelectric and piezomagnetic parameters of the constituent Materials. Thus, the results presented here represent a significant refinement of previously obtained results
Hadjiloizi Demetra - One of the best experts on this subject based on the ideXlab platform.
-
Analysis of Smart Piezo-magneto-thermo-elastic composite and reinforced plates: Part II - Applications
'Walter de Gruyter GmbH', 2014Co-Authors: Hadjiloizi Demetra, Kalamkarov A. L., Ch Metti, Georgiades TasosAbstract:A comprehensive micromechanical model for the analysis of a smart composite piezo-magneto-thermoelastic thin plate with rapidly varying thickness is developed in Part I of thiswork. The asymptotichomogenization model is developed using static equilibrium equations and the quasi-static approximation of Maxwell's equations. The work culminates in the derivation of general expressions for effective elastic, piezoelectric, piezomagnetic, dielectric permittivity and other coefficients. Among these coefficients, the so-called product coefficients are determined which are present in the behavior of the macroscopic composite as a result of the interactions between the various phases but can be absent from the constitutive behavior of some individual phases of the composite structure. The model is comprehensive enough to also allow for calculation of the local fields of mechanical stresses, electric displacement and magnetic induction. The present paper determines the effective properties of constant thickness laminates comprised of monoclinic Materials or orthotropic Materials which are rotated with respect to their Principal Material Coordinate system. A further example illustrates the determination of the effective properties of wafer-type magnetoelectric composite plates reinforced with smart ribs or stiffeners oriented along the tangential directions of the plate. For generality, it is assumed that the ribs and the base plate are made of different orthotropic Materials. It is shown in this work that for the purely elastic case the results of the derived model converge exactly to previously established models. However, in the more general case where some or all of the phases exhibit piezoelectric and/or piezomagnetic behavior, the expressions for the derived effective coefficients are shown to be dependent on not only the elastic properties but also on the piezoelectric and piezomagnetic parameters of the constituent Materials. Thus, the results presented here represent a significant refinement of previously obtained results