The Experts below are selected from a list of 84 Experts worldwide ranked by ideXlab platform
K.t. Hindy - One of the best experts on this subject based on the ideXlab platform.
-
Influence of selected fixed parameters on Pulse-Jet Fabric Filter operation
Atmospheric Environment, 2003Co-Authors: K.t. HindyAbstract:Abstract The effect of (a) fixing the time interval between cleaning pulses or (b) fixing the maximum pressure drop at which cleaning is started, on the performance of the Fabric Filter was investigated. A maximum pressure drop value of 2500 Pa: 1. (a) minimized the effect of the Filter medium resistance; 2. (b) reduced the energy consumption by the Filter; 3. (c) minimized the dust emission from the Fabric Filter to the surrounding atmosphere.
Henry W Pennline - One of the best experts on this subject based on the ideXlab platform.
-
recent advances in mercury removal technology at the national energy technology laboratory
Fuel Processing Technology, 2004Co-Authors: William J Odowd, Richard A Hargis, Evan J Granite, Henry W PennlineAbstract:Abstract The in-house research effort on mercury studies at the National Energy Technology Laboratory is an integrated, multi-task approach, including experimentation at both the laboratory-scale and the pilot-scale, as well as a numerical modeling effort to aid in interpretation of pilot-scale results. In the laboratory-scale work, novel sorbents and techniques for the removal of mercury from flue gas are being investigated using a small packed-bed reactor. The reactor system is used to screen novel sorbents for their capability to remove mercury from gas streams. The capacities of these novel sorbents are determined as a function of gas composition and temperature and are compared to results with commercially available activated carbons. In the pilot-scale work, an existing pilot unit has been characterized with respect to the distribution and fate of hazardous air pollutants in flue gas, with an emphasis on mercury. The pilot unit is a 500-lb/h (227-kg/h) pulverized coal-fired (PCFC) combustion system that includes a furnace, air preheater, spray dryer, ductwork and a Pulse-Jet Fabric Filter. The investigations with this unit have entailed evaluation of various activated carbons and novel sorbents, as well as comparisons of various sampling techniques for the determination of total and speciated forms of mercury. The impact of various parameters (temperature, sorbent-to-mercury ratio, baghouse pressure drop) on the removal of mercury has been investigated. Additionally, a slipstream allows for the investigation of sorbent injection in a fly ash-free flue gas over a wide range of operating conditions, including residence time. A summary of the results for mercury measurement and control from the 500-lb/h (227-kg/h) PCFC combustion system will be presented, as well as the evaluation of methods for measurement of in-duct removals using the slipstream. Finally, a discussion of the numerical modeling effort will be given.
William J Odowd - One of the best experts on this subject based on the ideXlab platform.
-
recent advances in mercury removal technology at the national energy technology laboratory
Fuel Processing Technology, 2004Co-Authors: William J Odowd, Richard A Hargis, Evan J Granite, Henry W PennlineAbstract:Abstract The in-house research effort on mercury studies at the National Energy Technology Laboratory is an integrated, multi-task approach, including experimentation at both the laboratory-scale and the pilot-scale, as well as a numerical modeling effort to aid in interpretation of pilot-scale results. In the laboratory-scale work, novel sorbents and techniques for the removal of mercury from flue gas are being investigated using a small packed-bed reactor. The reactor system is used to screen novel sorbents for their capability to remove mercury from gas streams. The capacities of these novel sorbents are determined as a function of gas composition and temperature and are compared to results with commercially available activated carbons. In the pilot-scale work, an existing pilot unit has been characterized with respect to the distribution and fate of hazardous air pollutants in flue gas, with an emphasis on mercury. The pilot unit is a 500-lb/h (227-kg/h) pulverized coal-fired (PCFC) combustion system that includes a furnace, air preheater, spray dryer, ductwork and a Pulse-Jet Fabric Filter. The investigations with this unit have entailed evaluation of various activated carbons and novel sorbents, as well as comparisons of various sampling techniques for the determination of total and speciated forms of mercury. The impact of various parameters (temperature, sorbent-to-mercury ratio, baghouse pressure drop) on the removal of mercury has been investigated. Additionally, a slipstream allows for the investigation of sorbent injection in a fly ash-free flue gas over a wide range of operating conditions, including residence time. A summary of the results for mercury measurement and control from the 500-lb/h (227-kg/h) PCFC combustion system will be presented, as well as the evaluation of methods for measurement of in-duct removals using the slipstream. Finally, a discussion of the numerical modeling effort will be given.
Javier Carrillo-valle - One of the best experts on this subject based on the ideXlab platform.
-
Conversion of an existing electrostatic precipitator casing to Pulse Jet Fabric Filter in fossil power plants
Universidad Nacional de Colombia, 2016Co-Authors: Francisco Manzano-agugliaro, Javier Carrillo-valleAbstract:The combustion process of power generation plants originates particulates. There are different technologies to collecting particulate such as electrostatic precipitators (ESPs) or Fabric Filters. Currently, these ESPs take 25 or 35 years in service and if the performance expectations of their Plants are positives, improving investments required which can adapt to the new particulate emission limits becoming more stringent. This paper analyzes an alternative means great savings in investment costs; Conversion of the existing ESP casing to a Pulse Jet Fabric Filter. This study also presents a real case, implementing this conversion with good results in unit of 660 MW power plants of Italy
Terry Hunt - One of the best experts on this subject based on the ideXlab platform.
-
Investigation and Demonstration of Dry Carbon-Based Sorbent Injection for Mercury Control
1997Co-Authors: Jason Ruhl, Justin Smith, Sharon Sjostrom, Sheila Haythorthwaite, Terry HuntAbstract:The U.S. Department of Energy (DOE) issued Public Service Company of Colorado (PSCO) a cost sharing contract to evaluate carbon-based sorbents for mercury control on a 600 acfm laboratory-scale particulate control module (PCM). The PCM can be configured as simulate an electrostatic precipitator, a Pulse-Jet Fabric Filter, or a reverse-gas Fabric Filter and is installed on an operating coal-fired power plant. Three different dry carbon-based sorbents were tested this quarter to determine their mercury removal capability in the different configurations. The project is currently in the seventh quarter of an eight-quarter Phase I project. Testing in all configurations is nearly complete. Original plans included the use of an on-line mercury analyzer to collect test data. However, due to very low baseline mercury concentration, on-line measurement did not provide accurate data. The project used a modified MESA method grab sample technique to determine inlet and outlet mercury concentrations. A major concern during sorbent evaluations was the natural ability of the flyash at the test site to remove mercury. This often made determination of sorbent only mercury removal difficult. The PCM was configured as a reverse-gas baghouse and brought online with "clean" flue gas on March 10* at an A/C of 2.0 ft/min. The dustcake forms the Filtering media in a reverse gas baghouse. In the absence of flyash, the bags were precoated with a commercially available alumina silicate material to form an inert dustcake. Some baseline tests were completed with clean gas for comparison to clean gas pulse jet tests. The PCM was reconfigured as a TOXECON unit in April 1997 with testing completed in May 1997. TOXECON, an EPIU patented technology, is a Pulse-Jet baghouse operating at a high A/C ratio downstream of a primary particulate colIector with sorbent injection upstream of the baghouse for air toxics removal. Mercury removals of O to 97o/0 were obtained depending on test conditions