The Experts below are selected from a list of 9579 Experts worldwide ranked by ideXlab platform
Tingju Li - One of the best experts on this subject based on the ideXlab platform.
-
a new strategy to design eutectic high entropy alloys using mixing enthalpy
Intermetallics, 2017Co-Authors: Yiping Lu, Tongmin Wang, Hui Jiang, Tingju LiAbstract:Although eutectic high entropy alloys (EHEAs) display homogeneously fine microstructure, excellent castability and promising industrial application potential, how to design eutectic compositions in high entropy alloys (HEAs) remains to be challenging. Here, a novel strategy, specifically, through calculation of mixing enthalpy, was used to locate eutectic compositions in HEAs. As a proof of this concept, a series of EHEAs were located and prepared following the mixing enthalpy method. Using this new strategy, eutectic compositions can be designed conveniently, once one can classify elements into two different groups. This new alloy design strategy can be readily adapted to locate new EHEAs.
-
directly cast bulk eutectic and near eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Acta Materialia, 2017Co-Authors: Yiping Lu, Li Jiang, Zongning Chen, Tongmin Wang, Huijun Kang, Yubo Zhang, Haihui Ruan, Yonghao Zhao, Tingju LiAbstract:High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
Tongmin Wang - One of the best experts on this subject based on the ideXlab platform.
-
a new strategy to design eutectic high entropy alloys using mixing enthalpy
Intermetallics, 2017Co-Authors: Yiping Lu, Tongmin Wang, Hui Jiang, Tingju LiAbstract:Although eutectic high entropy alloys (EHEAs) display homogeneously fine microstructure, excellent castability and promising industrial application potential, how to design eutectic compositions in high entropy alloys (HEAs) remains to be challenging. Here, a novel strategy, specifically, through calculation of mixing enthalpy, was used to locate eutectic compositions in HEAs. As a proof of this concept, a series of EHEAs were located and prepared following the mixing enthalpy method. Using this new strategy, eutectic compositions can be designed conveniently, once one can classify elements into two different groups. This new alloy design strategy can be readily adapted to locate new EHEAs.
-
directly cast bulk eutectic and near eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Acta Materialia, 2017Co-Authors: Yiping Lu, Li Jiang, Zongning Chen, Tongmin Wang, Huijun Kang, Yubo Zhang, Haihui Ruan, Yonghao Zhao, Tingju LiAbstract:High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
-
directly cast bulk eutectic and near eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Acta Materialia, 2017Co-Authors: Xuzhou Gao, Li Jiang, Zongning Chen, Tongmin Wang, Huijun Kang, Yubo Zhang, Haihui Ruan, Jinchuan Jie, Sheng Guo, Yonghao ZhaoAbstract:High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
Yonghao Zhao - One of the best experts on this subject based on the ideXlab platform.
-
directly cast bulk eutectic and near eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Acta Materialia, 2017Co-Authors: Yiping Lu, Li Jiang, Zongning Chen, Tongmin Wang, Huijun Kang, Yubo Zhang, Haihui Ruan, Yonghao Zhao, Tingju LiAbstract:High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
-
directly cast bulk eutectic and near eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Acta Materialia, 2017Co-Authors: Xuzhou Gao, Li Jiang, Zongning Chen, Tongmin Wang, Huijun Kang, Yubo Zhang, Haihui Ruan, Jinchuan Jie, Sheng Guo, Yonghao ZhaoAbstract:High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
Yiping Lu - One of the best experts on this subject based on the ideXlab platform.
-
a new strategy to design eutectic high entropy alloys using mixing enthalpy
Intermetallics, 2017Co-Authors: Yiping Lu, Tongmin Wang, Hui Jiang, Tingju LiAbstract:Although eutectic high entropy alloys (EHEAs) display homogeneously fine microstructure, excellent castability and promising industrial application potential, how to design eutectic compositions in high entropy alloys (HEAs) remains to be challenging. Here, a novel strategy, specifically, through calculation of mixing enthalpy, was used to locate eutectic compositions in HEAs. As a proof of this concept, a series of EHEAs were located and prepared following the mixing enthalpy method. Using this new strategy, eutectic compositions can be designed conveniently, once one can classify elements into two different groups. This new alloy design strategy can be readily adapted to locate new EHEAs.
-
directly cast bulk eutectic and near eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Acta Materialia, 2017Co-Authors: Yiping Lu, Li Jiang, Zongning Chen, Tongmin Wang, Huijun Kang, Yubo Zhang, Haihui Ruan, Yonghao Zhao, Tingju LiAbstract:High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
Hideyuki Murakami - One of the best experts on this subject based on the ideXlab platform.
-
an oxidation resistant refractory high entropy alloy protected by crtao 4 based oxide
Scientific Reports, 2019Co-Authors: Kai Chi Lo, Yaojen Chang, Hideyuki MurakamiAbstract:Although refractory high entropy alloys (Rheas) have shown potentials to be developed as structural materials for elevated temperature applications, most of the reported oxidation behaviours of RHEA were associated with short term exposures for only up to 48 hours, and there is a lack of understanding on the oxidation mechanism of any RHEA to-date. In this work, by using thermogravimetric analysis, isothermal oxidation was conducted on a novel RHEA at 1000 °C and 1100 °C for up to 200 hours, which is an unprecedented testing duration. The external oxide layer strongly influenced the weight gain behaviours, and it consisted of CrTaO4-based oxide with some dispersion of Al2O3 and Cr2O3. At 1000 °C, the inability to form dense CrTaO4-based oxide layer resulted an exponential dependence of weight gain throughout 200 hours. At 1100 °C, mass gain curve showed two parabolic dependences associated with the formation of protective CrTaO4-based oxide layer and the weight gain after 200 hours was 4.03 mg/cm2, which indicates that it is one of the most oxidation resistant Rheas comparing to literature data to-date. This work can also provide insights on how to further develop RHEA to withstand long term oxidation at elevated temperatures.