The Experts below are selected from a list of 264 Experts worldwide ranked by ideXlab platform
Jing Zhu - One of the best experts on this subject based on the ideXlab platform.
-
Electroless nickel plating on Silicon Carbide nanoparticles
Surface and Coatings Technology, 2003Co-Authors: Yujin Chen, Maosheng Cao, Qiang Xu, Jing ZhuAbstract:By a simple and controlled method, that is, by electroless plating, nickel has been deposited on the surfaces of Silicon carbon nanoparticles. Energy dispersive spectrometry (EDS) spectra show that pre-treatments of the Silicon Carbide nanoparticles have an important influence on the effect of electroless nickel plating. Transmission electron microscopy images and EDS spectra of Silicon Carbide nanoparticles before and after electroless nickel plating reveal that nickel has been deposited on the surface of Silicon Carbide nanoparticles and the deposited nickel and Silicon Carbide nanoparticles are bound tightly. © 2003 Elsevier Science B.V. All rights reserved.
Yaw-shun Hong - One of the best experts on this subject based on the ideXlab platform.
-
Effect of Silicon Carbide dispersion on the microwave absorbing properties of Silicon Carbide-epoxy composites in 2–40 GHz
Journal of Polymer Research, 2016Co-Authors: Tzu-hao Ting, Chih-chia Chiang, Ken-fa Cheng, Yaw-shun HongAbstract:In this study, Silicon Carbide powders were manufactured successfully by the method of preheating combustion synthesis in nitrogen atmosphere where it was introduced into an epoxy resin to produce a microwave absorber. The structure of the Silicon Carbide was characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Composite based on the various loadings of Silicon Carbide and epoxy resin specimens were prepared and the reflection losses of these composite samples were studied using the free space method. Based on the microwave measurements, microwave absorber specimens of Silicon Carbide with thermal plastic resin at frequencies between 2 and 18 and 18–40 GHz could be obtained from a matching thickness of 2.0 mm by controlling the content of Silicon Carbide.
-
Effect of Silicon Carbide dispersion on the microwave absorbing properties of Silicon Carbide-epoxy composites in 2–40 GHz
Journal of Polymer Research, 2016Co-Authors: Tzu-hao Ting, Chih-chia Chiang, Ken-fa Cheng, Yaw-shun HongAbstract:In this study, Silicon Carbide powders were manufactured successfully by the method of preheating combustion synthesis in nitrogen atmosphere where it was introduced into an epoxy resin to produce a microwave absorber. The structure of the Silicon Carbide was characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Composite based on the various loadings of Silicon Carbide and epoxy resin specimens were prepared and the reflection losses of these composite samples were studied using the free space method. Based on the microwave measurements, microwave absorber specimens of Silicon Carbide with thermal plastic resin at frequencies between 2 and 18 and 18–40 GHz could be obtained from a matching thickness of 2.0 mm by controlling the content of Silicon Carbide.
Yujin Chen - One of the best experts on this subject based on the ideXlab platform.
-
Electroless nickel plating on Silicon Carbide nanoparticles
Surface & Coatings Technology, 2003Co-Authors: Yujin Chen, Qiang XuAbstract:By a simple and controlled method, that is, by electroless plating, nickel has been deposited on the surfaces of Silicon carbon nanoparticles. Energy dispersive spectrometry (EDS) spectra show that pre-treatments of the Silicon Carbide nanoparticles have an important influence on the effect of electroless nickel plating. Transmission electron microscopy images and EDS spectra of Silicon Carbide nanoparticles before and after electroless nickel plating reveal that nickel has been deposited on the surface of Silicon Carbide nanoparticles and the deposited nickel and Silicon Carbide nanoparticles are bound tightly.
-
Electroless nickel plating on Silicon Carbide nanoparticles
Surface and Coatings Technology, 2003Co-Authors: Yujin Chen, Maosheng Cao, Qiang Xu, Jing ZhuAbstract:By a simple and controlled method, that is, by electroless plating, nickel has been deposited on the surfaces of Silicon carbon nanoparticles. Energy dispersive spectrometry (EDS) spectra show that pre-treatments of the Silicon Carbide nanoparticles have an important influence on the effect of electroless nickel plating. Transmission electron microscopy images and EDS spectra of Silicon Carbide nanoparticles before and after electroless nickel plating reveal that nickel has been deposited on the surface of Silicon Carbide nanoparticles and the deposited nickel and Silicon Carbide nanoparticles are bound tightly. © 2003 Elsevier Science B.V. All rights reserved.
Qiang Xu - One of the best experts on this subject based on the ideXlab platform.
-
Electroless nickel plating on Silicon Carbide nanoparticles
Surface & Coatings Technology, 2003Co-Authors: Yujin Chen, Qiang XuAbstract:By a simple and controlled method, that is, by electroless plating, nickel has been deposited on the surfaces of Silicon carbon nanoparticles. Energy dispersive spectrometry (EDS) spectra show that pre-treatments of the Silicon Carbide nanoparticles have an important influence on the effect of electroless nickel plating. Transmission electron microscopy images and EDS spectra of Silicon Carbide nanoparticles before and after electroless nickel plating reveal that nickel has been deposited on the surface of Silicon Carbide nanoparticles and the deposited nickel and Silicon Carbide nanoparticles are bound tightly.
-
Electroless nickel plating on Silicon Carbide nanoparticles
Surface and Coatings Technology, 2003Co-Authors: Yujin Chen, Maosheng Cao, Qiang Xu, Jing ZhuAbstract:By a simple and controlled method, that is, by electroless plating, nickel has been deposited on the surfaces of Silicon carbon nanoparticles. Energy dispersive spectrometry (EDS) spectra show that pre-treatments of the Silicon Carbide nanoparticles have an important influence on the effect of electroless nickel plating. Transmission electron microscopy images and EDS spectra of Silicon Carbide nanoparticles before and after electroless nickel plating reveal that nickel has been deposited on the surface of Silicon Carbide nanoparticles and the deposited nickel and Silicon Carbide nanoparticles are bound tightly. © 2003 Elsevier Science B.V. All rights reserved.
Tzu-hao Ting - One of the best experts on this subject based on the ideXlab platform.
-
Effect of Silicon Carbide dispersion on the microwave absorbing properties of Silicon Carbide-epoxy composites in 2–40 GHz
Journal of Polymer Research, 2016Co-Authors: Tzu-hao Ting, Chih-chia Chiang, Ken-fa Cheng, Yaw-shun HongAbstract:In this study, Silicon Carbide powders were manufactured successfully by the method of preheating combustion synthesis in nitrogen atmosphere where it was introduced into an epoxy resin to produce a microwave absorber. The structure of the Silicon Carbide was characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Composite based on the various loadings of Silicon Carbide and epoxy resin specimens were prepared and the reflection losses of these composite samples were studied using the free space method. Based on the microwave measurements, microwave absorber specimens of Silicon Carbide with thermal plastic resin at frequencies between 2 and 18 and 18–40 GHz could be obtained from a matching thickness of 2.0 mm by controlling the content of Silicon Carbide.
-
Effect of Silicon Carbide dispersion on the microwave absorbing properties of Silicon Carbide-epoxy composites in 2–40 GHz
Journal of Polymer Research, 2016Co-Authors: Tzu-hao Ting, Chih-chia Chiang, Ken-fa Cheng, Yaw-shun HongAbstract:In this study, Silicon Carbide powders were manufactured successfully by the method of preheating combustion synthesis in nitrogen atmosphere where it was introduced into an epoxy resin to produce a microwave absorber. The structure of the Silicon Carbide was characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Composite based on the various loadings of Silicon Carbide and epoxy resin specimens were prepared and the reflection losses of these composite samples were studied using the free space method. Based on the microwave measurements, microwave absorber specimens of Silicon Carbide with thermal plastic resin at frequencies between 2 and 18 and 18–40 GHz could be obtained from a matching thickness of 2.0 mm by controlling the content of Silicon Carbide.