The Experts below are selected from a list of 2910 Experts worldwide ranked by ideXlab platform
Richard M Pollastro - One of the best experts on this subject based on the ideXlab platform.
-
total petroleum system assessment of undiscovered resources in the giant Barnett Shale continuous unconventional gas accumulation fort worth basin texas
AAPG Bulletin, 2007Co-Authors: Richard M PollastroAbstract:Undiscovered natural gas having potential for additions to reserves in the Mississippian Barnett Shale of the Fort Worth Basin, north-central Texas, was assessed using the total petroleum system assessment unit concept and a cell-based methodology for continuous-type (unconventional) resources. The Barnett-Paleozoic total petroleum system is defined in the Bend arch–Fort Worth Basin as encompassing the area in which the organic-rich Barnett is the primary source rock for oil and gas produced from Paleozoic carbonate and clastic reservoirs. Exploration, technology, and drilling in the Barnett Shale play have rapidly evolved in recent years, with about 3500 vertical and 1000 horizontal wells completed in the Barnett through 2005 and more than 85% of the them completed since 1999. Using framework geology and historical production data, assessment of the Barnett Shale was performed by the U.S. Geological Survey using vertical wells at the peak of vertical well completions and before a transition to completions with horizontal wells. The assessment was performed after (1) mapping critical geological and geochemical parameters to define assessment unit areas with future potential, (2) defining distributions of drainage area (cell size) and estimating ultimate recovery per cell, and (3) estimating future success rates. Two assessment units are defined and assessed for the Barnett Shale continuous gas accumulation, resulting in a total mean undiscovered volume having potential for additions to reserves of 26.2 TCFG. The greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit represents a core-producing area where thick, organic-rich, siliceous Barnett Shale is within the thermal window for gas generation (Ro 1.1%) and is overlain and underlain by impermeable limestone barriers (Pennsylvanian Marble Falls Limestone and Ordovician Viola Limestone, respectively) that serve to confine induced fractures during well completion to maximize gas recovery. The extended continuous Barnett Shale gas assessment unit, which had been less explored, defines a geographic area where Barnett Shale is (1) within the thermal window for gas generation, (2) greater than 100 ft (30 m) thick, and (3) where at least one impermeable limestone barrier is absent. Mean undiscovered gas having potential for additions to reserves in the greater Newark East assessment unit is estimated at 14.6 tcf, and in the less tested extended assessment unit, a mean resource is estimated at 11.6 TCFG. A third hypothetical basin-arch Barnett Shale oil assessment unit was defined but not assessed because of a lack of production data.
-
geologic framework of the mississippian Barnett Shale Barnett paleozoic total petroleum system bend arch fort worth basin texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
-
unconventional Shale gas systems the mississippian Barnett Shale of north central texas as one model for thermogenic Shale gas assessment
AAPG Bulletin, 2007Co-Authors: Daniel M Jarvie, Ronald J Hill, Tim E Ruble, Richard M PollastroAbstract:Shale-gas resource plays can be distinguished by gas type and system characteristics. The Newark East gas field, located in the Fort Worth Basin, Texas, is defined by thermogenic gas production from low-porosity and low-permeability Barnett Shale. The Barnett Shale gas system, a self-contained source-reservoir system, has generated large amounts of gas in the key productive areas because of various characteristics and processes, including (1) excellent original organic richness and generation potential; (2) primary and secondary cracking of kerogen and retained oil, respectively; (3) retention of oil for cracking to gas by adsorption; (4) porosity resulting from organic matter decomposition; and (5) brittle mineralogical composition. The calculated total gas in place (GIP) based on estimated ultimate recovery that is based on production profiles and operator estimates is about 204 bcf/section (5.78 × 10 9 m 3 /1.73 × 10 4 m 3 ). We estimate that the Barnett Shale has a total generation potential of about 609 bbl of oil equivalent/ac-ft or the equivalent of 3657 mcf/ac-ft (84.0 m 3 /m 3 ). Assuming a thickness of 350 ft (107 m) and only sufficient hydrogen for partial cracking of retained oil to gas, a total generation potential of 820 bcf/section is estimated. Of this potential, approximately 60% was expelled, and the balance was retained for secondary cracking of oil to gas, if sufficient thermal maturity was reached. Gas storage capacity of the Barnett Shale at typical reservoir pressure, volume, and temperature conditions and 6% porosity shows a maximum storage capacity of 540 mcf/ac-ft or 159 scf/ton.
-
Geologic framework of the Mississippian Barnett Shale, Barnett-Paleozoic total petroleum system, Bend arch–Fort Worth Basin, Texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
-
mississippian Barnett Shale fort worth basin north central texas gas Shale play with multi trillion cubic foot potential
AAPG Bulletin, 2005Co-Authors: Scott L Montgomery, Kent A Bowker, Daniel M Jarvie, Richard M PollastroAbstract:The Mississippian Barnett Shale serves as source, seal, and reservoir to a world-class unconventional natural-gas accumulation in the Fort Worth basin of north-central Texas. The formation is a lithologically complex interval of low permeability that requires artificial stimulation to produce. At present, production is mainly confined to a limited portion of the northern basin where the Barnett Shale is relatively thick (>300 ft; >92 m), organic rich (presentday total organic carbon > 3.0%), thermally mature (vitrinite reflectance > 1.1%), and enclosed by dense limestone units able to contain induced fractures. The most actively drilled area is Newark East field, currently the largest gas field in Texas. Newark East is 400 mi 2 (1036 km 2 ) in extent, with more than 2340 producing wells and about 2.7 tcf of booked gas reserves. Cumulative gas production from Barnett Shale wells through 2003 was about 0.8 tcf. Wells in Newark East field typically produce from depths of 7500 ft (2285 m) at rates ranging from 0.5 to more than 4 mmcf/day. Estimated ultimate recoveries per well range from 0.75 to as high as 7.0 bcf. Efforts to extend the current Barnett play beyond the field limits have encountered several challenges, including westward and northward increases in oil saturation and the absence of lithologic barriers to induced fracture growth. Patterns of oil and gas occurrence in the Barnett, in conjunction with maturation and burial-history data, indicate a complex, multiphased thermal evolution, with episodic expulsion of hydrocarbons and secondary cracking of primary oils to gas
Daniel M Jarvie - One of the best experts on this subject based on the ideXlab platform.
-
hydrocarbon potential of the Barnett Shale mississippian delaware basin west texas and southeastern new mexico
AAPG Bulletin, 2008Co-Authors: Travis J Kinley, Daniel M Jarvie, John A. Breyer, Lance W Cook, Arthur B BusbeyAbstract:The Barnett Shale (Mississippian) in the Delaware Basin has the potential to be a prolific gas producer. The Shale is organic rich and thermally mature over large parts of the basin. Depths to the Barnett range from 7000 ft (2133 m) along the western edge of the basin to more than 18,000 ft (5486 m) along the basin axis. The Barnett Shale began generating petroleum about 250 Ma and reached its maximum temperature about 260 Ma. Present-day thermal maturity is indicative of maximum burial and temperature. Wells in northern Reeves County are in the gas window based on measured vitrinite reflectance values and kerogen transformation ratios. The Shale can be divided into an upper clastic unit and a lower limy unit by changes in resistivity. The lower unit can be subdivided into five subunits by distinctive well-log markers. Preliminary analyses suggest that intervals in the lower Barnett marked by high resistivity and high neutron porosity readings on well logs have high gas contents. Areas in which to focus the future exploration in the lower Barnett can be delineated by mapping a net resistivity greater than 50 ohm m. The Barnett Shale contains significant gas resources in the Delaware Basin. Realizing the potential of these resources depends on the current efforts to optimize drilling and completion techniques for this Shale-gas play.
-
geologic framework of the mississippian Barnett Shale Barnett paleozoic total petroleum system bend arch fort worth basin texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
-
unconventional Shale gas systems the mississippian Barnett Shale of north central texas as one model for thermogenic Shale gas assessment
AAPG Bulletin, 2007Co-Authors: Daniel M Jarvie, Ronald J Hill, Tim E Ruble, Richard M PollastroAbstract:Shale-gas resource plays can be distinguished by gas type and system characteristics. The Newark East gas field, located in the Fort Worth Basin, Texas, is defined by thermogenic gas production from low-porosity and low-permeability Barnett Shale. The Barnett Shale gas system, a self-contained source-reservoir system, has generated large amounts of gas in the key productive areas because of various characteristics and processes, including (1) excellent original organic richness and generation potential; (2) primary and secondary cracking of kerogen and retained oil, respectively; (3) retention of oil for cracking to gas by adsorption; (4) porosity resulting from organic matter decomposition; and (5) brittle mineralogical composition. The calculated total gas in place (GIP) based on estimated ultimate recovery that is based on production profiles and operator estimates is about 204 bcf/section (5.78 × 10 9 m 3 /1.73 × 10 4 m 3 ). We estimate that the Barnett Shale has a total generation potential of about 609 bbl of oil equivalent/ac-ft or the equivalent of 3657 mcf/ac-ft (84.0 m 3 /m 3 ). Assuming a thickness of 350 ft (107 m) and only sufficient hydrogen for partial cracking of retained oil to gas, a total generation potential of 820 bcf/section is estimated. Of this potential, approximately 60% was expelled, and the balance was retained for secondary cracking of oil to gas, if sufficient thermal maturity was reached. Gas storage capacity of the Barnett Shale at typical reservoir pressure, volume, and temperature conditions and 6% porosity shows a maximum storage capacity of 540 mcf/ac-ft or 159 scf/ton.
-
Geologic framework of the Mississippian Barnett Shale, Barnett-Paleozoic total petroleum system, Bend arch–Fort Worth Basin, Texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
-
mississippian Barnett Shale fort worth basin north central texas gas Shale play with multi trillion cubic foot potential
AAPG Bulletin, 2005Co-Authors: Scott L Montgomery, Kent A Bowker, Daniel M Jarvie, Richard M PollastroAbstract:The Mississippian Barnett Shale serves as source, seal, and reservoir to a world-class unconventional natural-gas accumulation in the Fort Worth basin of north-central Texas. The formation is a lithologically complex interval of low permeability that requires artificial stimulation to produce. At present, production is mainly confined to a limited portion of the northern basin where the Barnett Shale is relatively thick (>300 ft; >92 m), organic rich (presentday total organic carbon > 3.0%), thermally mature (vitrinite reflectance > 1.1%), and enclosed by dense limestone units able to contain induced fractures. The most actively drilled area is Newark East field, currently the largest gas field in Texas. Newark East is 400 mi 2 (1036 km 2 ) in extent, with more than 2340 producing wells and about 2.7 tcf of booked gas reserves. Cumulative gas production from Barnett Shale wells through 2003 was about 0.8 tcf. Wells in Newark East field typically produce from depths of 7500 ft (2285 m) at rates ranging from 0.5 to more than 4 mmcf/day. Estimated ultimate recoveries per well range from 0.75 to as high as 7.0 bcf. Efforts to extend the current Barnett play beyond the field limits have encountered several challenges, including westward and northward increases in oil saturation and the absence of lithologic barriers to induced fracture growth. Patterns of oil and gas occurrence in the Barnett, in conjunction with maturation and burial-history data, indicate a complex, multiphased thermal evolution, with episodic expulsion of hydrocarbons and secondary cracking of primary oils to gas
Ronald J Hill - One of the best experts on this subject based on the ideXlab platform.
-
geologic framework of the mississippian Barnett Shale Barnett paleozoic total petroleum system bend arch fort worth basin texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
-
unconventional Shale gas systems the mississippian Barnett Shale of north central texas as one model for thermogenic Shale gas assessment
AAPG Bulletin, 2007Co-Authors: Daniel M Jarvie, Ronald J Hill, Tim E Ruble, Richard M PollastroAbstract:Shale-gas resource plays can be distinguished by gas type and system characteristics. The Newark East gas field, located in the Fort Worth Basin, Texas, is defined by thermogenic gas production from low-porosity and low-permeability Barnett Shale. The Barnett Shale gas system, a self-contained source-reservoir system, has generated large amounts of gas in the key productive areas because of various characteristics and processes, including (1) excellent original organic richness and generation potential; (2) primary and secondary cracking of kerogen and retained oil, respectively; (3) retention of oil for cracking to gas by adsorption; (4) porosity resulting from organic matter decomposition; and (5) brittle mineralogical composition. The calculated total gas in place (GIP) based on estimated ultimate recovery that is based on production profiles and operator estimates is about 204 bcf/section (5.78 × 10 9 m 3 /1.73 × 10 4 m 3 ). We estimate that the Barnett Shale has a total generation potential of about 609 bbl of oil equivalent/ac-ft or the equivalent of 3657 mcf/ac-ft (84.0 m 3 /m 3 ). Assuming a thickness of 350 ft (107 m) and only sufficient hydrogen for partial cracking of retained oil to gas, a total generation potential of 820 bcf/section is estimated. Of this potential, approximately 60% was expelled, and the balance was retained for secondary cracking of oil to gas, if sufficient thermal maturity was reached. Gas storage capacity of the Barnett Shale at typical reservoir pressure, volume, and temperature conditions and 6% porosity shows a maximum storage capacity of 540 mcf/ac-ft or 159 scf/ton.
-
modeling of gas generation from the Barnett Shale fort worth basin texas
AAPG Bulletin, 2007Co-Authors: Ronald J Hill, Etuan Zhang, Barry Katz, Yongchun TangAbstract:The generative gas potential of the Mississippian Barnett Shale in the Fort Worth Basin, Texas, was quantitatively evaluated by sealed gold-tube pyrolysis. Kinetic parameters for gas generation and vitrinite reflectance (Ro) changes were calculated from pyrolysis data and the results used to estimate the amount of gas generated from the Barnett Shale at geologic heating rates. Using derived kinetics for Ro evolution and gas generation, quantities of hydrocarbon gas generated at Ro 1.1% are about 230 L/t (7.4 scf/t) and increase to more that 5800 L/t (186 scf/t) at Ro 2.0% for a sample with an initial total organic carbon content of 5.5% and Ro = 0.44%. The volume of Shale gas generated will depend on the organic richness, thickness, and thermal maturity of the Shale and also the amount of petroleum that is retained in the Shale during migration. Gas that is reservoired in Shales appears to be generated from the cracking of kerogen and petroleum that is retained in Shales, and that cracking of the retained petroleum starts by Ro 1.1%. This result suggests that the cracking of petroleum retained in source rocks occurs at rates that are faster than what is predicted for conventional siliciclastic and carbonate reservoirs, and that contact of retained petroleum with kerogen and Shale mineralogy may be a critical factor in Shale-gas generation. Shale-gas systems, together with overburden, can be considered complete petroleum systems, although the processes of petroleum migration, accumulation, and trap formation are different from what is defined for conventional petroleum systems.
-
Geologic framework of the Mississippian Barnett Shale, Barnett-Paleozoic total petroleum system, Bend arch–Fort Worth Basin, Texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
Craig W Adams - One of the best experts on this subject based on the ideXlab platform.
-
geologic framework of the mississippian Barnett Shale Barnett paleozoic total petroleum system bend arch fort worth basin texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
-
Geologic framework of the Mississippian Barnett Shale, Barnett-Paleozoic total petroleum system, Bend arch–Fort Worth Basin, Texas
AAPG Bulletin, 2007Co-Authors: Richard M Pollastro, Daniel M Jarvie, Ronald J Hill, Craig W AdamsAbstract:This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as assessment units, the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch–Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch–Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells–Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (300 ft; 91 m) Barnett Shale that is within the gas-generation window (Ro 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent.
John A. Breyer - One of the best experts on this subject based on the ideXlab platform.
-
Lithologic and Stratigraphic Variation in a Continuous Shale-gas Reservoir: The Barnett Shale (Mississippian), Fort Worth Basin, Texas
2012Co-Authors: John A. Breyer, Philip J. Bunting, Rachael M. Monroe, Michael B. SteedAbstract:Shale reservoirs are continuous accumulations in which the same formation commonly serves as the source, reservoir, and seal for commercial accumulations of natural gas. Intrabasinal differences within continuous accumulations account for the indistinctly bound areas of better gas production termed sweet spots by operators. Generally similar sets of facies have been recognized in the Barnett Shale in the Fort Worth Basin by all recent workers. Dark mudstone to claystone with a matrix of clay minerals and cryptocrystalline quartz is the most common depositional facies in the Barnett Shale. Two predominantly calcareous depositional facies are next in abundance: argillaceous lime mudstone and skeletal argillaceous lime packstone. A variety of minor depositional and diagenetic facies are also present. The abundance and distribution of facies change with geographic location within the basin and stratigraphic position within the Barnett Shale. The most obvious example of this is the relative abundance of calcareous depositional facies in the northern part of the basin compared with their relative scarcity in the central part of the basin. All of the major facies recognized in the Barnett Shale have high concentrations of organic matter. The variation in facies is greater than the variation in organic matter content. The location of sweet spots with higher production rates within the Barnett Shale may ultimately be explained by the distribution of facies that respond differently to various completion procedures. As the play matures, it is likely that a detailed understanding of the geology, especially the distribution of facies, will become increasingly important in selecting well locations, intervals in which to land laterals, and which fracture stimulation techniques to use.
-
Shale Wedges and Stratal Architecture, Barnett Shale (Mississippian), Southern Fort Worth Basin, Texas
2012Co-Authors: Rachael M. Monroe, John A. BreyerAbstract:A thick Shale section cored in the EOG Resources Gordon saltwater disposal (SWD) well in the southern Fort Worth Basin contains six different lithologies. Gamma-ray readings on well logs can be used to distinguish the Barnett Shale (Mississippian) from the overlying Pennsylvanian Shales and to divide the Barnett Shale into upper and lower units referred to informally as the Barnett A and Barnett B. Laminated silty claystone to mudstone is the dominant lithology in the Pennsylvanian Shales above the Barnett Shale. The relative abundance of this lithology decreases downward in the core. It makes up a significant part of the Barnett A, but only a minor part of the Barnett B. A dark claystone shows the opposite trend, decreasing in relative abundance upward in the core. Sponge spicules are the most common silt- and sand-size grains in both the laminated claystone to mudstone and the dark claystone. Thin shell layers and phosphatic intervals are also found throughout the core. Shell layers are more common in the Pennsylvanian Shales. Phosphatic material is most abundant in the Barnett B at the base of the core. Claystones and mudstones, lacking sponge spicules, but containing significant amounts of silt-size quartz are found only in the Barnett B. Isopach maps show that the Barnett B is part of a large Shale wedge that prograded into the central and southern parts of the Fort Worth Basin from the northeast and that the Barnett A is part of a smaller Shale wedge that prograded from east to west across Johnson County. The upper wedge onlaps and dies out against the flank of the lower wedge. The distribution of lithologies in the Gordon SWD well can be related to the position of the well site on the Shale wedges. The site was far removed from areas of active sedimentation during the deposition of the Barnett B and closer to the main sources of sediment and areas of sedimentation during deposition of the Barnett A.
-
Lithology of the Barnett Shale (Mississippian), Southern Fort Worth Basin, Texas
2012Co-Authors: Philip J. Bunting, John A. BreyerAbstract:Five lithologies are present in the Barnett Shale (Mississippian) in a core taken in Johnson County, Texas, in the southern part of the Fort Worth Basin. Dark claystone to mudstone makes up 86% of the cored interval. Sponge spicules are the most common silt-size grain in this lithology. The clay-size material comprising the matrix is a mixture of cryptocrystalline quartz, probably derived from radiolarian tests, and clay minerals. The rock is highly siliceous, hard, dense, and brittle. Three calcareous lithologies are present in the core: limy layers, shell layers, and concretions. Together, these lithologies make up only 7% of the cored interval. The limy layers and concretions consist almost entirely of micrite. The shell layers contain gravel-size fragments of brachiopods, pelecypods, and cephalopods. The calcareous lithologies are found as thin interbeds in the dark claystone to mudstone throughout the core. A laminated siltstone to mudstone containing abundant sponge spicules is found only at the top of the cored interval. Glauconite and phosphatic material are conspicuous components of this lithology. The phosphatic material includes phosphate-coated grains of glauconite, quartz, and fossil fragments. The lithologies in the core resemble those described in the core from the northern part of the basin. However, the relative abundance of the various lithologies changes greatly from the northern part to the southern part of the basin. Understanding lithologic variation within the Barnett Shale is key to locating sweet spots within the play and then selecting intervals within the reservoir in which to land horizontals wells.
-
hydrocarbon potential of the Barnett Shale mississippian delaware basin west texas and southeastern new mexico
AAPG Bulletin, 2008Co-Authors: Travis J Kinley, Daniel M Jarvie, John A. Breyer, Lance W Cook, Arthur B BusbeyAbstract:The Barnett Shale (Mississippian) in the Delaware Basin has the potential to be a prolific gas producer. The Shale is organic rich and thermally mature over large parts of the basin. Depths to the Barnett range from 7000 ft (2133 m) along the western edge of the basin to more than 18,000 ft (5486 m) along the basin axis. The Barnett Shale began generating petroleum about 250 Ma and reached its maximum temperature about 260 Ma. Present-day thermal maturity is indicative of maximum burial and temperature. Wells in northern Reeves County are in the gas window based on measured vitrinite reflectance values and kerogen transformation ratios. The Shale can be divided into an upper clastic unit and a lower limy unit by changes in resistivity. The lower unit can be subdivided into five subunits by distinctive well-log markers. Preliminary analyses suggest that intervals in the lower Barnett marked by high resistivity and high neutron porosity readings on well logs have high gas contents. Areas in which to focus the future exploration in the lower Barnett can be delineated by mapping a net resistivity greater than 50 ohm m. The Barnett Shale contains significant gas resources in the Delaware Basin. Realizing the potential of these resources depends on the current efforts to optimize drilling and completion techniques for this Shale-gas play.