The Experts below are selected from a list of 8910 Experts worldwide ranked by ideXlab platform

Zou Zhi-xing - One of the best experts on this subject based on the ideXlab platform.

  • Simulation Study on Crosstalk and Radiation of Wire inside Automobile
    Computer Simulation, 2008
    Co-Authors: Zou Zhi-xing
    Abstract:

    The electromagnetic Compatibility already becomes the important aspect in automobile design,especially when designing the wires’ distribution. The numerical simulation method used to study automobile’s EMC (Electro Magnetic Compatibility) problem has many merits. How to establish the suitable simulation model for automobile was discussed. Through analyzing the coupling between wires due to connected wires or holes,it is known that when the connected wires drill through the holes,the coupling degree between wires is growing rapidly. The automobile body affects the electrical filed inside and outside. To the automobile model and the receiving antenna in 100MHz,the reserved carriage is the proper place to fix the receiving antenna because of less interference.

Duan Wan-li - One of the best experts on this subject based on the ideXlab platform.

  • Application of EMC design in power system design
    Chinese Journal of Power Sources, 2010
    Co-Authors: Duan Wan-li
    Abstract:

    Electro magnetic Compatibility(EMC) is an important index to value the quality of electronic product,and the EMC design can improve the safety of electronic products.Based on the influence of electromagnetic Compatibility on electronic products,the main application methods and the attentions in power system design were introduced,and the examples were given to explain the effects of EMC design on power control system.

T.l. Madsen - One of the best experts on this subject based on the ideXlab platform.

  • Hearing aids-acoustic and EMC test methods/standards
    Proceedings of 18th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 1996
    Co-Authors: G. Ravn, T.l. Madsen
    Abstract:

    A general requirement standard for hearing aids regarding the medical devices directive is being prepared at the moment. The basis of this standard (EN 50220) is the IEC 118 series of standards, which are widely used for documenting the electroacoustic performance of hearing aids. In 1995 standardisation initiatives were taken to include measurements and classification of hearing aids with regard to Electro Magnetic Compatibility (EMC) in the IEC 118 series of standards. This paper describes the technical aspects of the IEC hearing aid test standards.

Amirhossein Shahirini - One of the best experts on this subject based on the ideXlab platform.

  • A new high-frequency simulation model for multi-winding transformers used in switched-mode power supplies
    2016 IEEE Energy Conversion Congress and Exposition (ECCE), 2016
    Co-Authors: Ripunjoy Phukan, Lakshmi Ravi, Rangarajan M. Tallam, Amirhossein Shahirini
    Abstract:

    In this paper, a new high-frequency simulation model for multi-winding transformers used in switched-mode power supplies (SMPS) is presented. The model can be constructed from simple impedance measurements on a transformer and using information that can typically be found on component datasheets. The model can be applied to the design of an SMPS to determine peak voltage and current stress on the switching device, and to predict conducted emissions for Electro-Magnetic Compatibility (EMC). The model can be implemented through any commercially available circuit simulation package. Simulation and experimental results obtained on a high-voltage one-switch and two-switch Flyback SMPS are provided to validate the modeling method.

G. Ravn - One of the best experts on this subject based on the ideXlab platform.

  • Hearing aids-acoustic and EMC test methods/standards
    Proceedings of 18th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 1996
    Co-Authors: G. Ravn, T.l. Madsen
    Abstract:

    A general requirement standard for hearing aids regarding the medical devices directive is being prepared at the moment. The basis of this standard (EN 50220) is the IEC 118 series of standards, which are widely used for documenting the electroacoustic performance of hearing aids. In 1995 standardisation initiatives were taken to include measurements and classification of hearing aids with regard to Electro Magnetic Compatibility (EMC) in the IEC 118 series of standards. This paper describes the technical aspects of the IEC hearing aid test standards.