The Experts below are selected from a list of 4254 Experts worldwide ranked by ideXlab platform
Zhan Zhong-xian - One of the best experts on this subject based on the ideXlab platform.
-
Study on One Component Moisture Curing Polyurethane Hot Melt Adhesive
Chemistry and Adhesion, 2008Co-Authors: Zhan Zhong-xianAbstract:The one component moisture curing polyurethane hot melt Adhesives with different-NCO contents were synthesized from polyol and diisocyanate.The curing mechanism was expatiated,and the effects of structure of soft-segment,-NCO content,curing time and other fillers on the performance were discussed.The results showed that the one component moisture curing polyurethane hot melt Adhesives had the optimal performance with the-NCO content was 3.0% and addition of proper amount of terpene-resin and EVA.The tensile strength,initial adhesion and shear strength could reach9.5MPa,0.38MPa and 8.4MPa respectively when the curing time was 24 h.
-
Preparation and application of polyurethane Hot-Melt Adhesive
China Adhesives, 2006Co-Authors: Zhan Zhong-xianAbstract:Polyurethane Hot-Melt Adhesive was prepared which based on home-made polyester glycol、 chain-extender、isocyanate and other. It is influenced on tensile strength,shear strength,300% tensile strength, MI and application-temperature. This paper introduced applications of polyurethane Hot-Melt Adhesive on shoes、bookbinding and so on.
Liang Guozheng - One of the best experts on this subject based on the ideXlab platform.
-
Research and Development of Polyester Hot Melt Adhesive
Materials review, 2006Co-Authors: Liang GuozhengAbstract:The research and development of polyester hot melt Adhesive are reviewed. The recent development in biodegradable,water souluble,curable and functional polyester hot melt Adhesives are particularly discussed. Reactive polyester hot melt Adhesive with high-temperature resistance and solvent resistance and environmental friendly polyester hot melt Adhesive which is biodegradable or water-soluble are the development trend of polyester hot melt Adhesive.
Yang Ling - One of the best experts on this subject based on the ideXlab platform.
-
Research of Ethylene-vinyl Acetate Copolymer Resin Hot Melt Adhesive String
Forestry Machinery and Woodworking Equipment, 2012Co-Authors: Yang LingAbstract:Analysis and study of using ethylene-vinyl acetate copolymer resin and glass fiber yarn to produce hot melt Adhesive string is made,and the optimum method for producing hot melt Adhesive using ethylene-vinyl acetate copolymer resin and glass fiber yarn is determined through orthogonal experiments.
Lin Li-fen - One of the best experts on this subject based on the ideXlab platform.
-
Research progress in modification of polyester hot melt Adhesive
2013Co-Authors: Lin Li-fenAbstract:This paper introduced the research works on the modification of polyester hot melt Adhesives for the recent years.The works included the mobility improving,crystallization rate increasing,hydrolysis resistance,thermal stability,flame retardancy,transparency and other aspects.The environment friendly and functional type polyester hot melt Adhesives will be the main direction of future development.
Zhang Yu-qing - One of the best experts on this subject based on the ideXlab platform.
-
Preparation and Performance Research of Reactive Polyurethane Hot-Melt Adhesive
Chemical Propellants & Polymeric Materials, 2006Co-Authors: Zhang Yu-qingAbstract:The reactive polyurethane Hot-Melt Adhesive was synthesized by using polytetramethylene glycol(PTMG),methylene-4,4'-diphenylene diisocyanate(MDI) and ethylene-vinyl acetate copolymer(EVA) as main raw materials. The effect of different relativemolecular mass PTMG, NCO and EVA contents on mechanical properties of reactive Hot-Melt Adhesive was studied. The results showedthat flexibility and elongation of Adhesive increased with increasing of polyether relative molecular mass. The mechanical properties ofAdhesive were better when NCO mass fraction was 4%￣6%. The comprehensive performance of Adhesive was better when EVA massfraction was 30%.