The Experts below are selected from a list of 30633 Experts worldwide ranked by ideXlab platform

Miranda Pacheco, Mario Jimmy - One of the best experts on this subject based on the ideXlab platform.

  • Propuesta de mejora en la cadena de suministro para optimizar los procesos en el área de planificación de una planta de pinturas (Tesis parcial)
    Universidad Privada del Norte, 2018
    Co-Authors: Miranda Pacheco, Mario Jimmy
    Abstract:

    RESUMEN La presente tesis tiene como objetivo mejorar los procesos en el área de planificación de la empresa Qroma, líder en el rubro de fabricación y comercialización de pintura para decoración y recubrimiento de interiores y exteriores. Con presencia a nivel nacional y en Latinoamérica. Para ello se evaluaron los factores que afectan la cadena de suministro en el área de planificación. Debido al incremento de SKU (Stock keeping Unit) y la variedad de productos que son ofrecidos a un mercado tan amplio como automotriz, arquitectónico, marino, Industrial, madera y teniendo en cuenta que la previsión de la demanda es un factor importante en la gestión de inventarios y para tener un adecuado nivel de servicio y un stock adecuado. Se realizó en el presente trabajo una clasificación del surtido identificando los productos como make to stock (MTS), make to orden (MTO) y estratégicos, Se segmentaron los productos por categoría y se clasifico los productos de acuerdo a la matriz de rentabilidad como AA, A, B, C. Además; permitió establecer objetivos de nivel de servicio a cada cuadrante, permitiendo priorizar las decisiones en los procesos y actividades de la cadena y así mejorar la gestión de inventario y reducir los quiebres de stock y por último se estandarizó los procesos para mejorar el lead time de producción. Palabras Claves: Make to stock, make to order, SKU (Stock keeping unit)ABSTRACT The objective of the present test is to improve the processes in the planning area of the company Qroma, leader in the manufacturing and commercialization of decoration and coating of interior and exterior painting. With presence at a national level and in Latin America. For this, the factors that affect the supply chain in the planning area were evaluated. Due to the increase of SKU (Stock Keeping Unit) and the variety of products offered in such a wide market as automotive, architectural, marine, Industrial, Wood and taking into account that the forecast of demand is an important factor in the management of inventories and to have an adequate level of service and an adequate stock. The present work was carried out a classification of the assortment identifying the products as make to stock (MTS), make to order (MTO) and strategic products, were segmented by category and classified the products according to the profitability matrix as AA, A, B, C. In addition, establish service level objectives for each quadrant, allowing to prioritize the decisions in the processes and activities of the chain and thus improve the inventory management and reduce the stock breaks and finally the processes were standardized to improve production time. Key words: Make to stock, make to order, SKU (Stock keeping unit

  • Propuesta de mejora en la cadena de suministro para optimizar los procesos en el área de planificación de una planta de pinturas (Tesis parcial)
    'Dipartimento di Economia Universita di Perugia (IT)', 2018
    Co-Authors: Miranda Pacheco, Mario Jimmy
    Abstract:

    ABSTRACT The objective of the present test is to improve the processes in the planning area of the company Qroma, leader in the manufacturing and commercialization of decoration and coating of interior and exterior painting. With presence at a national level and in Latin America. For this, the factors that affect the supply chain in the planning area were evaluated. Due to the increase of SKU (Stock Keeping Unit) and the variety of products offered in such a wide market as automotive, architectural, marine, Industrial, Wood and taking into account that the forecast of demand is an important factor in the management of inventories and to have an adequate level of service and an adequate stock. The present work was carried out a classification of the assortment identifying the products as make to stock (MTS), make to order (MTO) and strategic products, were segmented by category and classified the products according to the profitability matrix as AA, A, B, C. In addition, establish service level objectives for each quadrant, allowing to prioritize the decisions in the processes and activities of the chain and thus improve the inventory management and reduce the stock breaks and finally the processes were standardized to improve production time. Key words: Make to stock, make to order, SKU (Stock keeping unit)TesisRESUMEN La presente tesis tiene como objetivo mejorar los procesos en el área de planificación de la empresa Qroma, líder en el rubro de fabricación y comercialización de pintura para decoración y recubrimiento de interiores y exteriores. Con presencia a nivel nacional y en Latinoamérica. Para ello se evaluaron los factores que afectan la cadena de suministro en el área de planificación. Debido al incremento de SKU (Stock keeping Unit) y la variedad de productos que son ofrecidos a un mercado tan amplio como automotriz, arquitectónico, marino, Industrial, madera y teniendo en cuenta que la previsión de la demanda es un factor importante en la gestión de inventarios y para tener un adecuado nivel de servicio y un stock adecuado. Se realizó en el presente trabajo una clasificación del surtido identificando los productos como make to stock (MTS), make to orden (MTO) y estratégicos, Se segmentaron los productos por categoría y se clasifico los productos de acuerdo a la matriz de rentabilidad como AA, A, B, C. Además; permitió establecer objetivos de nivel de servicio a cada cuadrante, permitiendo priorizar las decisiones en los procesos y actividades de la cadena y así mejorar la gestión de inventario y reducir los quiebres de stock y por último se estandarizó los procesos para mejorar el lead time de producción. Palabras Claves: Make to stock, make to order, SKU (Stock keeping unit

Keil, Gabriel Darío - One of the best experts on this subject based on the ideXlab platform.

  • Evaluación del comportamiento de soluciones con potencialidad funguicida mediante ensayos de biodegradación en laboratorio y FT-IR
    2020
    Co-Authors: Murace, Mónica Adriana, Saparrat, Mario Carlos Nazareno, Maly, Laura Elizabeth, Keil, Gabriel Darío
    Abstract:

    En la República Argentina, el Arseniato de cobre cromatado (CCA-C) es una de las sustancias más utilizadas en el campo de la preservación Industrial de las maderas. La toxicidad y fijación de dicho preservante aseguran para el material tratado una vida útil superior a los 30 años en condiciones de uso extremas.El reemplazo del CCA es tendencia mundial debido a la presencia de arsénico (Ar) y cromo hexavalente (Cr+6) en su composición. En este contexto, existe un creciente interés en el desarrollo de compuestos no tóxicos y con igual efectividad que el CCA.El objetivo del trabajo fue evaluar el comportamiento de soluciones hidrosolubles de bajo compromiso ambiental en madera de Pinus ponderosa mediante su resistencia a la degradación fúngica y espectroscopía infrarroja transformada de Fourier (FT-IR). Se trabajó con albura de P. ponderosa Dougl. ex Laws. proveniente de ejemplares de una forestación de 22 años de edad ubicada en Neuquén (Argentina). Parte del material fue impregnado en autoclave con paraformaldehído (3 concentraciones); metaborato de sodio (2 concentraciones); fosfato-borato; preservante biodegradable en desarrollo y CCA-C (preservante de referencia).En el material tratado fueron determinadas la penetración, absorción, retención nominal y real (IRAM 9600). Los ensayos de biodegradación se realizaron según IRAM 9518 con Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., hongo causante de pudrición castaña. Fueron utilizadas 360 probetas (40 por tratamiento/solución y concentración incluyendo al testigo). Del total, 180 fueron expuestas a situaciones de intemperismo simuladas en laboratorio a fin de determinar la permanencia de las soluciones de ensayo; el resto permitió determinar toxicidad. Toxicidad y permanencia fueron estimadas indirectamente, mediante la media de pérdida de peso (Pp %) obtenida para cada tratamiento.Estos datos permitieron determinar la clase de resistencia a la degradación fúngica y consecuentemente el comportamiento de las soluciones. Asimismo se procedió al análisis químico de las probetas de la totalidad de los tratamientos pertenecientes a ambos tipos de ensayo mediante FT-IR como tambien de aquellas tratadas sin exposición a la cepa fúngica (testigo de cada tratamiento).Los espectros de absorción FT-IR fueron registrados entre los 4000 y 400 cm-1. Se seleccionaron bandas de referencia dentro de la región 800-1800 cm-1 que reflejan grupos funcionales característicos de los polímeros de la madera, y se estimaron sus intensidades relativas. El preservante biodegradable poseería el mayor potencial como sustituto del CCA. La toxicidad de dicha solución evidenciada mediante los ensayos de biodegradación (la madera resultó altamente resistente al igual que la tratada con CCA) y FT-IR como también mediante los parámetros de preservación obtenidos en el material, avalarían su aptitud. Por su parte, si bien manifestó tendencia al lixiviado, el material mantuvo su clase de resistencia/durabilidad.In the Argentine Republic, the chromated copper arsenate (CCA-C) is one of the most commonly used substances in the Industrial Wood preservation. The toxicity and fixing of this preservative ensure for the treated material a useful life more than 30 years in extreme conditions of use. The replacement of the CCA is a world trend due to the presence of arsenic (Ar) and chrome hexavalent (Cr+6) in its composition. In this context, there is a growing interest in the development of non toxic compounds and with equal effectiveness to the CCA. The objective of the work was to evaluate the behavior of water-soluble solutions of low commitment environmental in Wood of Pinus ponderosa through its resistance to fungal degradation and spectroscopy infrared transformed of Fourier (FT-IR). It worked with P. ponderosa Dougl. ex Laws. sapWood from 22 years old forestry located in Neuquén (Argentine). Part of the material was impregnated in autoclave with paraformaldehyde (3 concentration); metaborate of sodium (2 concentration); fosfato-borato; biodegradable preservative in development and CCA-C (preservative of reference). In the treated material, penetration, absorption, nominal and real retention (IRAM 9600) were determined. The biodegradation tests were carried out according to IRAM 9518 with Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., a brown rot fungus. 360 specimens (40 by treatment / solution and concentration including control) were used. Of total, 180 were exposed to situations of weathering simulated in laboratory to determine the permanence of the solutions; the rest allowed to determine the toxicity. Toxicity and permanence were indirectly estimated, through the average weight loss obtained for each treatment. These data allowed to determine the class of resistance to fungal degradation and consequently the behavior of the solutions. Also is proceeded to the chemical analysis of the specimens of all treatments belonging to both types of essay by FT-IR as well as those treated without exposition to the fungal strain (witness of each treatment). The absorption spectra of FT-IR were registered between the 4000 and 400 cm-1. Bands of reference within the region 800-1800 cm-1 that reflect functional groups characteristic of the Wood polymers were selected, and their intensities relating were estimated. Biodegradable preservative would possess the greatest potential as substitute of the CCA. The toxicity of this solution, evidenced by the biodegradation tests (the Wood was highly resistant as well as the CCA-treated) and FT-IR as also the preservation parameters obtained in material, would endorse their aptitude. Moreover, although tendency to leach, the material maintained its strength/durability class.Facultad de Ciencias Agrarias y ForestalesInstituto de Fisiología Vegeta

  • Evaluación del comportamiento de soluciones con potencialidad funguicida mediante ensayos de biodegradación en laboratorio y FT -IR
    Instituto Forestal, 2016
    Co-Authors: Murace, Mónica Adriana, Saparrat, Mario Carlos Nazareno, Maly Laura, Keil, Gabriel Darío
    Abstract:

    En la República Argentina, el Arseniato de cobre cromatado (CCA-C) es una de las sustancias más utilizadas en el campo de la preservación Industrial de las maderas. La toxicidad y fijación de dicho preservante aseguran para el material tratado una vida útil superior a los 30 años en condiciones de uso extremas.El reemplazo del CCA es tendencia mundial debido a la presencia de arsénico (Ar) y cromo hexavalente (Cr+6) en su composición. En este contexto, existe un creciente interés en el desarrollo de compuestos no tóxicos y con igual efectividad que el CCA.El objetivo del trabajo fue evaluar el comportamiento de soluciones hidrosolubles de bajo compromiso ambiental en madera de Pinus ponderosa mediante su resistencia a la degradación fúngica y espectroscopía infrarroja transformada de Fourier (FT-IR). Se trabajó con albura de P. ponderosa Dougl. ex Laws. proveniente de ejemplares de una forestación de 22 años de edad ubicada en Neuquén (Argentina). Parte del material fue impregnado en autoclave con paraformaldehído (3 concentraciones); metaborato de sodio (2 concentraciones); fosfato-borato; preservante biodegradable en desarrollo y CCA-C (preservante de referencia).En el material tratado fueron determinadas la penetración, absorción, retención nominal y real (IRAM 9600). Los ensayos de biodegradación se realizaron según IRAM 9518 con Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., hongo causante de pudrición castaña. Fueron utilizadas 360 probetas (40 por tratamiento/solución y concentración incluyendo al testigo). Del total, 180 fueron expuestas a situaciones de intemperismo simuladas en laboratorio a fin de determinar la permanencia de las soluciones de ensayo; el resto permitió determinar toxicidad. Toxicidad y permanencia fueron estimadas indirectamente, mediante la media de pérdida de peso (Pp %) obtenida para cada tratamiento.Estos datos permitieron determinar la clase de resistencia a la degradación fúngica y consecuentemente el comportamiento de las soluciones. Asimismo se procedió al análisis químico de las probetas de la totalidad de los tratamientos pertenecientes a ambos tipos de ensayo mediante FT-IR como tambien de aquellas tratadas sin exposición a la cepa fúngica (testigo de cada tratamiento).Los espectros de absorción FT-IR fueron registrados entre los 4000 y 400 cm-1. Se seleccionaron bandas de referencia dentro de la región 800-1800 cm-1 que reflejan grupos funcionales característicos de los polímeros de la madera, y se estimaron sus intensidades relativas. El preservante biodegradable poseería el mayor potencial como sustituto del CCA. La toxicidad de dicha solución evidenciada mediante los ensayos de biodegradación (la madera resultó altamente resistente al igual que la tratada con CCA) y FT-IR como también mediante los parámetros de preservación obtenidos en el material, avalarían su aptitud. Por su parte, si bien manifestó tendencia al lixiviado, el material mantuvo su clase de resistencia/durabilidad.In the Argentine Republic, the chromated copper arsenate (CCA-C) is one of the most commonly used substances in the Industrial Wood preservation. The toxicity and fixing of this preservative ensure for the treated material a useful life more than 30 years in extreme conditions of use. The replacement of the CCA is a world trend due to the presence of arsenic (Ar) and chrome hexavalent (Cr+6) in its composition. In this context, there is a growing interest in the development of non toxic compounds and with equal effectiveness to the CCA. The objective of the work was to evaluate the behavior of water-soluble solutions of low commitment environmental in Wood of Pinus ponderosa through its resistance to fungal degradation and spectroscopy infrared transformed of Fourier (FT-IR). It worked with P. ponderosa Dougl. ex Laws. sapWood from 22 years old forestry located in Neuquén (Argentine). Part of the material was impregnated in autoclave with paraformaldehyde (3 concentration); metaborate of sodium (2 concentration); fosfato-borato; biodegradable preservative in development and CCA-C (preservative of reference). In the treated material, penetration, absorption, nominal and real retention (IRAM 9600) were determined. The biodegradation tests were carried out according to IRAM 9518 with Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., a brown rot fungus. 360 specimens (40 by treatment / solution and concentration including control) were used. Of total, 180 were exposed to situations of weathering simulated in laboratory to determine the permanence of the solutions; the rest allowed to determine the toxicity. Toxicity and permanence were indirectly estimated, through the average weight loss obtained for each treatment. These data allowed to determine the class of resistance to fungal degradation and consequently the behavior of the solutions. Also is proceeded to the chemical analysis of the specimens of all treatments belonging to both types of essay by FT-IR as well as those treated without exposition to the fungal strain (witness of each treatment). The absorption spectra of FT-IR were registered between the 4000 and 400 cm-1. Bands of reference within the region 800-1800 cm-1 that reflect functional groups characteristic of the Wood polymers were selected, and their intensities relating were estimated. Biodegradable preservative would possess the greatest potential as substitute of the CCA. The toxicity of this solution, evidenced by the biodegradation tests (the Wood was highly resistant as well as the CCA-treated) and FT-IR as also the preservation parameters obtained in material, would endorse their aptitude. Moreover, although tendency to leach, the material maintained its strength/durability class.Fil: Murace, Mónica Adriana. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Saparrat, Mario Carlos Nazareno. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Fisiología Vegetal. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Instituto de Fisiología Vegetal; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Maly, Laura. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Keil, Gabriel Dario. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; Argentin

Murace, Mónica Adriana - One of the best experts on this subject based on the ideXlab platform.

  • Evaluación del comportamiento de soluciones con potencialidad funguicida mediante ensayos de biodegradación en laboratorio y FT-IR
    2020
    Co-Authors: Murace, Mónica Adriana, Saparrat, Mario Carlos Nazareno, Maly, Laura Elizabeth, Keil, Gabriel Darío
    Abstract:

    En la República Argentina, el Arseniato de cobre cromatado (CCA-C) es una de las sustancias más utilizadas en el campo de la preservación Industrial de las maderas. La toxicidad y fijación de dicho preservante aseguran para el material tratado una vida útil superior a los 30 años en condiciones de uso extremas.El reemplazo del CCA es tendencia mundial debido a la presencia de arsénico (Ar) y cromo hexavalente (Cr+6) en su composición. En este contexto, existe un creciente interés en el desarrollo de compuestos no tóxicos y con igual efectividad que el CCA.El objetivo del trabajo fue evaluar el comportamiento de soluciones hidrosolubles de bajo compromiso ambiental en madera de Pinus ponderosa mediante su resistencia a la degradación fúngica y espectroscopía infrarroja transformada de Fourier (FT-IR). Se trabajó con albura de P. ponderosa Dougl. ex Laws. proveniente de ejemplares de una forestación de 22 años de edad ubicada en Neuquén (Argentina). Parte del material fue impregnado en autoclave con paraformaldehído (3 concentraciones); metaborato de sodio (2 concentraciones); fosfato-borato; preservante biodegradable en desarrollo y CCA-C (preservante de referencia).En el material tratado fueron determinadas la penetración, absorción, retención nominal y real (IRAM 9600). Los ensayos de biodegradación se realizaron según IRAM 9518 con Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., hongo causante de pudrición castaña. Fueron utilizadas 360 probetas (40 por tratamiento/solución y concentración incluyendo al testigo). Del total, 180 fueron expuestas a situaciones de intemperismo simuladas en laboratorio a fin de determinar la permanencia de las soluciones de ensayo; el resto permitió determinar toxicidad. Toxicidad y permanencia fueron estimadas indirectamente, mediante la media de pérdida de peso (Pp %) obtenida para cada tratamiento.Estos datos permitieron determinar la clase de resistencia a la degradación fúngica y consecuentemente el comportamiento de las soluciones. Asimismo se procedió al análisis químico de las probetas de la totalidad de los tratamientos pertenecientes a ambos tipos de ensayo mediante FT-IR como tambien de aquellas tratadas sin exposición a la cepa fúngica (testigo de cada tratamiento).Los espectros de absorción FT-IR fueron registrados entre los 4000 y 400 cm-1. Se seleccionaron bandas de referencia dentro de la región 800-1800 cm-1 que reflejan grupos funcionales característicos de los polímeros de la madera, y se estimaron sus intensidades relativas. El preservante biodegradable poseería el mayor potencial como sustituto del CCA. La toxicidad de dicha solución evidenciada mediante los ensayos de biodegradación (la madera resultó altamente resistente al igual que la tratada con CCA) y FT-IR como también mediante los parámetros de preservación obtenidos en el material, avalarían su aptitud. Por su parte, si bien manifestó tendencia al lixiviado, el material mantuvo su clase de resistencia/durabilidad.In the Argentine Republic, the chromated copper arsenate (CCA-C) is one of the most commonly used substances in the Industrial Wood preservation. The toxicity and fixing of this preservative ensure for the treated material a useful life more than 30 years in extreme conditions of use. The replacement of the CCA is a world trend due to the presence of arsenic (Ar) and chrome hexavalent (Cr+6) in its composition. In this context, there is a growing interest in the development of non toxic compounds and with equal effectiveness to the CCA. The objective of the work was to evaluate the behavior of water-soluble solutions of low commitment environmental in Wood of Pinus ponderosa through its resistance to fungal degradation and spectroscopy infrared transformed of Fourier (FT-IR). It worked with P. ponderosa Dougl. ex Laws. sapWood from 22 years old forestry located in Neuquén (Argentine). Part of the material was impregnated in autoclave with paraformaldehyde (3 concentration); metaborate of sodium (2 concentration); fosfato-borato; biodegradable preservative in development and CCA-C (preservative of reference). In the treated material, penetration, absorption, nominal and real retention (IRAM 9600) were determined. The biodegradation tests were carried out according to IRAM 9518 with Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., a brown rot fungus. 360 specimens (40 by treatment / solution and concentration including control) were used. Of total, 180 were exposed to situations of weathering simulated in laboratory to determine the permanence of the solutions; the rest allowed to determine the toxicity. Toxicity and permanence were indirectly estimated, through the average weight loss obtained for each treatment. These data allowed to determine the class of resistance to fungal degradation and consequently the behavior of the solutions. Also is proceeded to the chemical analysis of the specimens of all treatments belonging to both types of essay by FT-IR as well as those treated without exposition to the fungal strain (witness of each treatment). The absorption spectra of FT-IR were registered between the 4000 and 400 cm-1. Bands of reference within the region 800-1800 cm-1 that reflect functional groups characteristic of the Wood polymers were selected, and their intensities relating were estimated. Biodegradable preservative would possess the greatest potential as substitute of the CCA. The toxicity of this solution, evidenced by the biodegradation tests (the Wood was highly resistant as well as the CCA-treated) and FT-IR as also the preservation parameters obtained in material, would endorse their aptitude. Moreover, although tendency to leach, the material maintained its strength/durability class.Facultad de Ciencias Agrarias y ForestalesInstituto de Fisiología Vegeta

  • Evaluación del comportamiento de soluciones con potencialidad funguicida mediante ensayos de biodegradación en laboratorio y FT -IR
    Instituto Forestal, 2016
    Co-Authors: Murace, Mónica Adriana, Saparrat, Mario Carlos Nazareno, Maly Laura, Keil, Gabriel Darío
    Abstract:

    En la República Argentina, el Arseniato de cobre cromatado (CCA-C) es una de las sustancias más utilizadas en el campo de la preservación Industrial de las maderas. La toxicidad y fijación de dicho preservante aseguran para el material tratado una vida útil superior a los 30 años en condiciones de uso extremas.El reemplazo del CCA es tendencia mundial debido a la presencia de arsénico (Ar) y cromo hexavalente (Cr+6) en su composición. En este contexto, existe un creciente interés en el desarrollo de compuestos no tóxicos y con igual efectividad que el CCA.El objetivo del trabajo fue evaluar el comportamiento de soluciones hidrosolubles de bajo compromiso ambiental en madera de Pinus ponderosa mediante su resistencia a la degradación fúngica y espectroscopía infrarroja transformada de Fourier (FT-IR). Se trabajó con albura de P. ponderosa Dougl. ex Laws. proveniente de ejemplares de una forestación de 22 años de edad ubicada en Neuquén (Argentina). Parte del material fue impregnado en autoclave con paraformaldehído (3 concentraciones); metaborato de sodio (2 concentraciones); fosfato-borato; preservante biodegradable en desarrollo y CCA-C (preservante de referencia).En el material tratado fueron determinadas la penetración, absorción, retención nominal y real (IRAM 9600). Los ensayos de biodegradación se realizaron según IRAM 9518 con Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., hongo causante de pudrición castaña. Fueron utilizadas 360 probetas (40 por tratamiento/solución y concentración incluyendo al testigo). Del total, 180 fueron expuestas a situaciones de intemperismo simuladas en laboratorio a fin de determinar la permanencia de las soluciones de ensayo; el resto permitió determinar toxicidad. Toxicidad y permanencia fueron estimadas indirectamente, mediante la media de pérdida de peso (Pp %) obtenida para cada tratamiento.Estos datos permitieron determinar la clase de resistencia a la degradación fúngica y consecuentemente el comportamiento de las soluciones. Asimismo se procedió al análisis químico de las probetas de la totalidad de los tratamientos pertenecientes a ambos tipos de ensayo mediante FT-IR como tambien de aquellas tratadas sin exposición a la cepa fúngica (testigo de cada tratamiento).Los espectros de absorción FT-IR fueron registrados entre los 4000 y 400 cm-1. Se seleccionaron bandas de referencia dentro de la región 800-1800 cm-1 que reflejan grupos funcionales característicos de los polímeros de la madera, y se estimaron sus intensidades relativas. El preservante biodegradable poseería el mayor potencial como sustituto del CCA. La toxicidad de dicha solución evidenciada mediante los ensayos de biodegradación (la madera resultó altamente resistente al igual que la tratada con CCA) y FT-IR como también mediante los parámetros de preservación obtenidos en el material, avalarían su aptitud. Por su parte, si bien manifestó tendencia al lixiviado, el material mantuvo su clase de resistencia/durabilidad.In the Argentine Republic, the chromated copper arsenate (CCA-C) is one of the most commonly used substances in the Industrial Wood preservation. The toxicity and fixing of this preservative ensure for the treated material a useful life more than 30 years in extreme conditions of use. The replacement of the CCA is a world trend due to the presence of arsenic (Ar) and chrome hexavalent (Cr+6) in its composition. In this context, there is a growing interest in the development of non toxic compounds and with equal effectiveness to the CCA. The objective of the work was to evaluate the behavior of water-soluble solutions of low commitment environmental in Wood of Pinus ponderosa through its resistance to fungal degradation and spectroscopy infrared transformed of Fourier (FT-IR). It worked with P. ponderosa Dougl. ex Laws. sapWood from 22 years old forestry located in Neuquén (Argentine). Part of the material was impregnated in autoclave with paraformaldehyde (3 concentration); metaborate of sodium (2 concentration); fosfato-borato; biodegradable preservative in development and CCA-C (preservative of reference). In the treated material, penetration, absorption, nominal and real retention (IRAM 9600) were determined. The biodegradation tests were carried out according to IRAM 9518 with Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., a brown rot fungus. 360 specimens (40 by treatment / solution and concentration including control) were used. Of total, 180 were exposed to situations of weathering simulated in laboratory to determine the permanence of the solutions; the rest allowed to determine the toxicity. Toxicity and permanence were indirectly estimated, through the average weight loss obtained for each treatment. These data allowed to determine the class of resistance to fungal degradation and consequently the behavior of the solutions. Also is proceeded to the chemical analysis of the specimens of all treatments belonging to both types of essay by FT-IR as well as those treated without exposition to the fungal strain (witness of each treatment). The absorption spectra of FT-IR were registered between the 4000 and 400 cm-1. Bands of reference within the region 800-1800 cm-1 that reflect functional groups characteristic of the Wood polymers were selected, and their intensities relating were estimated. Biodegradable preservative would possess the greatest potential as substitute of the CCA. The toxicity of this solution, evidenced by the biodegradation tests (the Wood was highly resistant as well as the CCA-treated) and FT-IR as also the preservation parameters obtained in material, would endorse their aptitude. Moreover, although tendency to leach, the material maintained its strength/durability class.Fil: Murace, Mónica Adriana. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Saparrat, Mario Carlos Nazareno. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Fisiología Vegetal. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Instituto de Fisiología Vegetal; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Maly, Laura. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Keil, Gabriel Dario. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; Argentin

Maria Cristina Area - One of the best experts on this subject based on the ideXlab platform.

  • second generation bioethanol from Industrial Wood waste of south american species
    Biofuel Research Journal, 2017
    Co-Authors: María E. Vallejos, Julia Kruyeniski, Maria Cristina Area
    Abstract:

    Fil: Vallejos, Maria Evangelina. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Centro Cientifico Tecnologico Conicet - Nordeste. Instituto de Materiales de Misiones. Universidad Nacional de Misiones. Facultad de Ciencias Exactas Quimicas y Naturales. Instituto de Materiales de Misiones; Argentina

  • Second-generation bioethanol from Industrial Wood waste of South American species
    Green Wave Publishing of Canada, 2017
    Co-Authors: María E. Vallejos, Julia Kruyeniski, Maria Cristina Area
    Abstract:

    There is a global interest in replacing fossil fuels with renewable sources of energy. The present review evaluates the significance of South-American Wood Industrial wastes for bioethanol production. Four countries have been chosen for this review, i.e., Argentina, Brazil, Chile, and Uruguay, based on their current or potential forestry industry. It should be noted that although Brazil has a global bioethanol market share of 25%, its production is mainly first-generation bioethanol from sugarcane. The situation in the other countries is even worse, in spite of the fact that they have regulatory frameworks in place already allowing the substitution of a percentage of gasoline by ethanol. Pines and eucalyptus are the usually forested plants in these countries, and their Industrial wastes, as chips and sawdust, could serve as promising raw materials to produce second-generation bioethanol in the context of a forest biorefinery. The process to convert Woody biomass involves three stages: pretreatment, enzymatic saccharification, and fermentation. The operational conditions of the pretreatment method used are generally defined according to the physical and chemical characteristics of the raw materials and subsequently determine the characteristics of the treated substrates. This article also reviews and discusses the available pretreatment technologies for eucalyptus and pines applicable to South-American Industrial Wood wastes, their enzymatic hydrolysis yields, and the feasibility of implementing such processes in the mentioned countries in the frame of a biorefinery

Saparrat, Mario Carlos Nazareno - One of the best experts on this subject based on the ideXlab platform.

  • Evaluación del comportamiento de soluciones con potencialidad funguicida mediante ensayos de biodegradación en laboratorio y FT-IR
    2020
    Co-Authors: Murace, Mónica Adriana, Saparrat, Mario Carlos Nazareno, Maly, Laura Elizabeth, Keil, Gabriel Darío
    Abstract:

    En la República Argentina, el Arseniato de cobre cromatado (CCA-C) es una de las sustancias más utilizadas en el campo de la preservación Industrial de las maderas. La toxicidad y fijación de dicho preservante aseguran para el material tratado una vida útil superior a los 30 años en condiciones de uso extremas.El reemplazo del CCA es tendencia mundial debido a la presencia de arsénico (Ar) y cromo hexavalente (Cr+6) en su composición. En este contexto, existe un creciente interés en el desarrollo de compuestos no tóxicos y con igual efectividad que el CCA.El objetivo del trabajo fue evaluar el comportamiento de soluciones hidrosolubles de bajo compromiso ambiental en madera de Pinus ponderosa mediante su resistencia a la degradación fúngica y espectroscopía infrarroja transformada de Fourier (FT-IR). Se trabajó con albura de P. ponderosa Dougl. ex Laws. proveniente de ejemplares de una forestación de 22 años de edad ubicada en Neuquén (Argentina). Parte del material fue impregnado en autoclave con paraformaldehído (3 concentraciones); metaborato de sodio (2 concentraciones); fosfato-borato; preservante biodegradable en desarrollo y CCA-C (preservante de referencia).En el material tratado fueron determinadas la penetración, absorción, retención nominal y real (IRAM 9600). Los ensayos de biodegradación se realizaron según IRAM 9518 con Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., hongo causante de pudrición castaña. Fueron utilizadas 360 probetas (40 por tratamiento/solución y concentración incluyendo al testigo). Del total, 180 fueron expuestas a situaciones de intemperismo simuladas en laboratorio a fin de determinar la permanencia de las soluciones de ensayo; el resto permitió determinar toxicidad. Toxicidad y permanencia fueron estimadas indirectamente, mediante la media de pérdida de peso (Pp %) obtenida para cada tratamiento.Estos datos permitieron determinar la clase de resistencia a la degradación fúngica y consecuentemente el comportamiento de las soluciones. Asimismo se procedió al análisis químico de las probetas de la totalidad de los tratamientos pertenecientes a ambos tipos de ensayo mediante FT-IR como tambien de aquellas tratadas sin exposición a la cepa fúngica (testigo de cada tratamiento).Los espectros de absorción FT-IR fueron registrados entre los 4000 y 400 cm-1. Se seleccionaron bandas de referencia dentro de la región 800-1800 cm-1 que reflejan grupos funcionales característicos de los polímeros de la madera, y se estimaron sus intensidades relativas. El preservante biodegradable poseería el mayor potencial como sustituto del CCA. La toxicidad de dicha solución evidenciada mediante los ensayos de biodegradación (la madera resultó altamente resistente al igual que la tratada con CCA) y FT-IR como también mediante los parámetros de preservación obtenidos en el material, avalarían su aptitud. Por su parte, si bien manifestó tendencia al lixiviado, el material mantuvo su clase de resistencia/durabilidad.In the Argentine Republic, the chromated copper arsenate (CCA-C) is one of the most commonly used substances in the Industrial Wood preservation. The toxicity and fixing of this preservative ensure for the treated material a useful life more than 30 years in extreme conditions of use. The replacement of the CCA is a world trend due to the presence of arsenic (Ar) and chrome hexavalent (Cr+6) in its composition. In this context, there is a growing interest in the development of non toxic compounds and with equal effectiveness to the CCA. The objective of the work was to evaluate the behavior of water-soluble solutions of low commitment environmental in Wood of Pinus ponderosa through its resistance to fungal degradation and spectroscopy infrared transformed of Fourier (FT-IR). It worked with P. ponderosa Dougl. ex Laws. sapWood from 22 years old forestry located in Neuquén (Argentine). Part of the material was impregnated in autoclave with paraformaldehyde (3 concentration); metaborate of sodium (2 concentration); fosfato-borato; biodegradable preservative in development and CCA-C (preservative of reference). In the treated material, penetration, absorption, nominal and real retention (IRAM 9600) were determined. The biodegradation tests were carried out according to IRAM 9518 with Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., a brown rot fungus. 360 specimens (40 by treatment / solution and concentration including control) were used. Of total, 180 were exposed to situations of weathering simulated in laboratory to determine the permanence of the solutions; the rest allowed to determine the toxicity. Toxicity and permanence were indirectly estimated, through the average weight loss obtained for each treatment. These data allowed to determine the class of resistance to fungal degradation and consequently the behavior of the solutions. Also is proceeded to the chemical analysis of the specimens of all treatments belonging to both types of essay by FT-IR as well as those treated without exposition to the fungal strain (witness of each treatment). The absorption spectra of FT-IR were registered between the 4000 and 400 cm-1. Bands of reference within the region 800-1800 cm-1 that reflect functional groups characteristic of the Wood polymers were selected, and their intensities relating were estimated. Biodegradable preservative would possess the greatest potential as substitute of the CCA. The toxicity of this solution, evidenced by the biodegradation tests (the Wood was highly resistant as well as the CCA-treated) and FT-IR as also the preservation parameters obtained in material, would endorse their aptitude. Moreover, although tendency to leach, the material maintained its strength/durability class.Facultad de Ciencias Agrarias y ForestalesInstituto de Fisiología Vegeta

  • Evaluación del comportamiento de soluciones con potencialidad funguicida mediante ensayos de biodegradación en laboratorio y FT -IR
    Instituto Forestal, 2016
    Co-Authors: Murace, Mónica Adriana, Saparrat, Mario Carlos Nazareno, Maly Laura, Keil, Gabriel Darío
    Abstract:

    En la República Argentina, el Arseniato de cobre cromatado (CCA-C) es una de las sustancias más utilizadas en el campo de la preservación Industrial de las maderas. La toxicidad y fijación de dicho preservante aseguran para el material tratado una vida útil superior a los 30 años en condiciones de uso extremas.El reemplazo del CCA es tendencia mundial debido a la presencia de arsénico (Ar) y cromo hexavalente (Cr+6) en su composición. En este contexto, existe un creciente interés en el desarrollo de compuestos no tóxicos y con igual efectividad que el CCA.El objetivo del trabajo fue evaluar el comportamiento de soluciones hidrosolubles de bajo compromiso ambiental en madera de Pinus ponderosa mediante su resistencia a la degradación fúngica y espectroscopía infrarroja transformada de Fourier (FT-IR). Se trabajó con albura de P. ponderosa Dougl. ex Laws. proveniente de ejemplares de una forestación de 22 años de edad ubicada en Neuquén (Argentina). Parte del material fue impregnado en autoclave con paraformaldehído (3 concentraciones); metaborato de sodio (2 concentraciones); fosfato-borato; preservante biodegradable en desarrollo y CCA-C (preservante de referencia).En el material tratado fueron determinadas la penetración, absorción, retención nominal y real (IRAM 9600). Los ensayos de biodegradación se realizaron según IRAM 9518 con Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., hongo causante de pudrición castaña. Fueron utilizadas 360 probetas (40 por tratamiento/solución y concentración incluyendo al testigo). Del total, 180 fueron expuestas a situaciones de intemperismo simuladas en laboratorio a fin de determinar la permanencia de las soluciones de ensayo; el resto permitió determinar toxicidad. Toxicidad y permanencia fueron estimadas indirectamente, mediante la media de pérdida de peso (Pp %) obtenida para cada tratamiento.Estos datos permitieron determinar la clase de resistencia a la degradación fúngica y consecuentemente el comportamiento de las soluciones. Asimismo se procedió al análisis químico de las probetas de la totalidad de los tratamientos pertenecientes a ambos tipos de ensayo mediante FT-IR como tambien de aquellas tratadas sin exposición a la cepa fúngica (testigo de cada tratamiento).Los espectros de absorción FT-IR fueron registrados entre los 4000 y 400 cm-1. Se seleccionaron bandas de referencia dentro de la región 800-1800 cm-1 que reflejan grupos funcionales característicos de los polímeros de la madera, y se estimaron sus intensidades relativas. El preservante biodegradable poseería el mayor potencial como sustituto del CCA. La toxicidad de dicha solución evidenciada mediante los ensayos de biodegradación (la madera resultó altamente resistente al igual que la tratada con CCA) y FT-IR como también mediante los parámetros de preservación obtenidos en el material, avalarían su aptitud. Por su parte, si bien manifestó tendencia al lixiviado, el material mantuvo su clase de resistencia/durabilidad.In the Argentine Republic, the chromated copper arsenate (CCA-C) is one of the most commonly used substances in the Industrial Wood preservation. The toxicity and fixing of this preservative ensure for the treated material a useful life more than 30 years in extreme conditions of use. The replacement of the CCA is a world trend due to the presence of arsenic (Ar) and chrome hexavalent (Cr+6) in its composition. In this context, there is a growing interest in the development of non toxic compounds and with equal effectiveness to the CCA. The objective of the work was to evaluate the behavior of water-soluble solutions of low commitment environmental in Wood of Pinus ponderosa through its resistance to fungal degradation and spectroscopy infrared transformed of Fourier (FT-IR). It worked with P. ponderosa Dougl. ex Laws. sapWood from 22 years old forestry located in Neuquén (Argentine). Part of the material was impregnated in autoclave with paraformaldehyde (3 concentration); metaborate of sodium (2 concentration); fosfato-borato; biodegradable preservative in development and CCA-C (preservative of reference). In the treated material, penetration, absorption, nominal and real retention (IRAM 9600) were determined. The biodegradation tests were carried out according to IRAM 9518 with Gloeophyllum sepiarium (Wulf.: Fr.) P. Karst., a brown rot fungus. 360 specimens (40 by treatment / solution and concentration including control) were used. Of total, 180 were exposed to situations of weathering simulated in laboratory to determine the permanence of the solutions; the rest allowed to determine the toxicity. Toxicity and permanence were indirectly estimated, through the average weight loss obtained for each treatment. These data allowed to determine the class of resistance to fungal degradation and consequently the behavior of the solutions. Also is proceeded to the chemical analysis of the specimens of all treatments belonging to both types of essay by FT-IR as well as those treated without exposition to the fungal strain (witness of each treatment). The absorption spectra of FT-IR were registered between the 4000 and 400 cm-1. Bands of reference within the region 800-1800 cm-1 that reflect functional groups characteristic of the Wood polymers were selected, and their intensities relating were estimated. Biodegradable preservative would possess the greatest potential as substitute of the CCA. The toxicity of this solution, evidenced by the biodegradation tests (the Wood was highly resistant as well as the CCA-treated) and FT-IR as also the preservation parameters obtained in material, would endorse their aptitude. Moreover, although tendency to leach, the material maintained its strength/durability class.Fil: Murace, Mónica Adriana. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Saparrat, Mario Carlos Nazareno. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Fisiología Vegetal. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Instituto de Fisiología Vegetal; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Maly, Laura. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; ArgentinaFil: Keil, Gabriel Dario. Universidad Nacional de La Plata. Facultad de Ciencias Agrarias y Forestales; Argentin