The Experts below are selected from a list of 24 Experts worldwide ranked by ideXlab platform

Chen Z - One of the best experts on this subject based on the ideXlab platform.

  • Preparation of antibacterial microFibre
    National Institute of Science Communication and Information Resources, 2016
    Co-Authors: Miao D, Zhao H, Jiang S, Shang S, Chen Z
    Abstract:

    Three different kinds of antibacterial microFibres (270D, 300D and 330D) have been developed by adding 2-4 wt % nano silver masterbatch in the melt spinning process. The mechanical properties, silver content and morphology have been examined with tensile tester, inductively coupled plasma-optical emission spectrometer and scanning electron microscope respectively. Their antibacterial abilities are also studied with KS K 0693: 2011. The results show that the added nanoparticles have little influence on mechanical properties of antibacterial microFibres and their max strain and tenacity are similar to that of common Manmade Fibre. The fineness of the 270D, 300D and 330D samples are found to be 0.23, 0.26 and 0.30 den, and the corresponding added silver contents are 265.5, 231 and 259 ppm respectively. It is also observed that all samples bacteriostatic reduction rates are about 99.9% for both Staphylococcus aureus and Klebsiella pneumonia before washing. But after washing, it drops to 65.4%/75%, 91.9%/97.7% and 94.8%/99.9% respectively for both the bacteria in case of 270D, 300D and 330D samples. It is concluded that 300D and 330D microFibre samples have good antibacterial ability before and after washing.Institute of Textiles and Clothing2015-2016 > Academic research: refereed > Publication in refereed journa

  • Preparation of antibacterial microFibre
    National Institute of Science Communication and Information Resources, 2016
    Co-Authors: Miao D, Zhao H, Jiang S, Shang S, Chen Z
    Abstract:

    Three different kinds of antibacterial microFibres (270D, 300D and 330D) have been developed by adding 2-4 wt % nano silver masterbatch in the melt spinning process. The mechanical properties, silver content and morphology have been examined with tensile tester, inductively coupled plasma-optical emission spectrometer and scanning electron microscope respectively. Their antibacterial abilities are also studied with KS K 0693: 2011. The results show that the added nanoparticles have little influence on mechanical properties of antibacterial microFibres and their max strain and tenacity are similar to that of common Manmade Fibre. The fineness of the 270D, 300D and 330D samples are found to be 0.23, 0.26 and 0.30 den, and the corresponding added silver contents are 265.5, 231 and 259 ppm respectively. It is also observed that all samples bacteriostatic reduction rates are about 99.9% for both Staphylococcus aureus and Klebsiella pneumonia before washing. But after washing, it drops to 65.4%/75%, 91.9%/97.7% and 94.8%/99.9% respectively for both the bacteria in case of 270D, 300D and 330D samples. It is concluded that 300D and 330D microFibre samples have good antibacterial ability before and after washing.Institute of Textiles and Clothin

Zhao Wei - One of the best experts on this subject based on the ideXlab platform.

  • a new kind of Manmade Fibre soybean protein Fibre
    Journal of Zhengzhou Institute of Technology, 2003
    Co-Authors: Zhao Wei
    Abstract:

    As a new kind of Manmade protein Fibre, the soybean protein Fibre interests those in the textile field. On the basis of the batch production soybean protein Fibre whose length is similar to the cotton Fibre, the paper introduces the Fibre's producing process, fundamental properties, products feature, analyses and predicts the development and defaults of the Fibre.

Miao D - One of the best experts on this subject based on the ideXlab platform.

  • Preparation of antibacterial microFibre
    National Institute of Science Communication and Information Resources, 2016
    Co-Authors: Miao D, Zhao H, Jiang S, Shang S, Chen Z
    Abstract:

    Three different kinds of antibacterial microFibres (270D, 300D and 330D) have been developed by adding 2-4 wt % nano silver masterbatch in the melt spinning process. The mechanical properties, silver content and morphology have been examined with tensile tester, inductively coupled plasma-optical emission spectrometer and scanning electron microscope respectively. Their antibacterial abilities are also studied with KS K 0693: 2011. The results show that the added nanoparticles have little influence on mechanical properties of antibacterial microFibres and their max strain and tenacity are similar to that of common Manmade Fibre. The fineness of the 270D, 300D and 330D samples are found to be 0.23, 0.26 and 0.30 den, and the corresponding added silver contents are 265.5, 231 and 259 ppm respectively. It is also observed that all samples bacteriostatic reduction rates are about 99.9% for both Staphylococcus aureus and Klebsiella pneumonia before washing. But after washing, it drops to 65.4%/75%, 91.9%/97.7% and 94.8%/99.9% respectively for both the bacteria in case of 270D, 300D and 330D samples. It is concluded that 300D and 330D microFibre samples have good antibacterial ability before and after washing.Institute of Textiles and Clothing2015-2016 > Academic research: refereed > Publication in refereed journa

  • Preparation of antibacterial microFibre
    National Institute of Science Communication and Information Resources, 2016
    Co-Authors: Miao D, Zhao H, Jiang S, Shang S, Chen Z
    Abstract:

    Three different kinds of antibacterial microFibres (270D, 300D and 330D) have been developed by adding 2-4 wt % nano silver masterbatch in the melt spinning process. The mechanical properties, silver content and morphology have been examined with tensile tester, inductively coupled plasma-optical emission spectrometer and scanning electron microscope respectively. Their antibacterial abilities are also studied with KS K 0693: 2011. The results show that the added nanoparticles have little influence on mechanical properties of antibacterial microFibres and their max strain and tenacity are similar to that of common Manmade Fibre. The fineness of the 270D, 300D and 330D samples are found to be 0.23, 0.26 and 0.30 den, and the corresponding added silver contents are 265.5, 231 and 259 ppm respectively. It is also observed that all samples bacteriostatic reduction rates are about 99.9% for both Staphylococcus aureus and Klebsiella pneumonia before washing. But after washing, it drops to 65.4%/75%, 91.9%/97.7% and 94.8%/99.9% respectively for both the bacteria in case of 270D, 300D and 330D samples. It is concluded that 300D and 330D microFibre samples have good antibacterial ability before and after washing.Institute of Textiles and Clothin

Jinsheng Roan - One of the best experts on this subject based on the ideXlab platform.

  • the growth stage model of quality information systems an example of Manmade Fibre industry
    Total Quality Management & Business Excellence, 2019
    Co-Authors: Chunnan Lin, Jinsheng Roan
    Abstract:

    This study focused on a man-made Fibre industry to explore the quality information systems (QISs) development in an enterprise and to construct a QIS growth stage model. Empirical analyses based on the data collected from a series of quality promotion projects spanned 67 months. Several quality performance measurement indicators, namely quality cost indicator (QCI), defect rate, zero defect rate (ZDR), and defect class, were defined and applied to identify the characteristics of each stage. A five-stage QIS growth model, comprising Planning, Control, Integration, Extension, and Maturity Stages, was developed. During the planning stage, the QIS was to provide quality reports and subsequently integrate the QIS with the ISO-9000 system at the control stage; the integration stage focused on the integration of the QIS and TQM; at the extension stage, the QIS was extended to material processing; and the maturity stage emphasised the integration of the QIS with the enterprise’s internal and external information ...

Zhuoming Chen - One of the best experts on this subject based on the ideXlab platform.

  • Preparation of antibacterial microFibre
    Indian Journal of Fibre & Textile Research (IJFTR), 2016
    Co-Authors: Dagang Miao, Hongmei Zhao, Shouxiang Jiang, Songmin Shang, Zhuoming Chen
    Abstract:

    Three different kinds of antibacterial microFibres (270D, 300D and 330D) have been developed by adding 2-4 wt % nano silver masterbatch in the melt spinning process. The mechanical properties, silver content and morphology have been examined with tensile tester, inductively coupled plasma-optical emission spectrometer and scanning electron microscope respectively. Their antibacterial abilities are also studied with KS K 0693:2011. The results show that the added nano-particles have little influence on mechanical properties of antibacterial microFibres and their max strain and tenacity are similar to that of common Manmade Fibre. The fineness of the 270D, 300D and 330D samples are found to be 0.23, 0.26 and 0.30 den, and the corresponding added silver contents are 265.5, 231 and 259 ppm respectively. It is also observed that all samples bacteriostatic reduction rates are about 99.9% for both Staphylococcus aureus and Klebsiella pneumonia before washing. But after washing, it drops to 65.4%/75%, 91.9%/97.7% and 94.8%/99.9% respectively for both the bacteria in case of 270D, 300D and 330D samples. It is concluded that 300D and 330D microFibre samples have good antibacterial ability before and after washing