The Experts below are selected from a list of 1881 Experts worldwide ranked by ideXlab platform
Michele Modesti - One of the best experts on this subject based on the ideXlab platform.
-
Phosphinates and layered silicates in charring polymers the flame retardancy action in polyurethane foams
Polymer Degradation and Stability, 2013Co-Authors: Alessandra Lorenzetti, Bernhard Schartel, Stefano Besco, Denis Hrelja, Martina Roso, Emanuela Gallo, Michele ModestiAbstract:Abstract Nanocomposites of a charring polymer (like polyurethane foam) filled with aluminum Phosphinate (AlPi) with or without melamine cyanurate (MelCy) have been prepared by microwave processing and their thermal stability and fire behavior have been studied. Results on the interaction between flame retardants and layered silicates were provided as well as detailed investigation of the char strength, which has been carried out using a suitably developed method based on dynamic-mechanic analysis. Generally, the thermo-oxidative stability in presence of layered silicates was higher than the counterparts even if an additive rather than synergic effect took place; however, in some cases the interaction between clays and Phosphinate led to a significant decrease of weight residue. In nitrogen the residue amounts were about the same but a higher amount of phosphorus was retained in the solid phase in presence of clays. Cone calorimeter results showed that the use of Phosphinates led to a decrease of the PHRR; further addition of clays did not reduce the PHRR owing to the worse quality of char layer as demonstrated by the char strength test. However, it has been shown that the partial substitution of aluminum Phosphinate with melamine cyanurate gave improved results: the AlPi–MelCy filled foams showed similar pHRR and THE but lower TSR and higher char strength than AlPi filled foams. It was also confirmed that Phosphinate acted by flame inhibition but its action was depressed by the use of nanoclays owing to their interaction.
-
influence of phosphorus valency on thermal behaviour of flame retarded polyurethane foams
Polymer Degradation and Stability, 2011Co-Authors: Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, Michele Modesti, S DonadiAbstract:Abstract This paper reports decomposition/pyrolysis studies of polyurethane (PU) rigid foams containing Phosphinate, phosphonate or phosphate as flame retardant in order to study the effect of phosphorus oxidation state on their gas and/or solid phase action. The flame retardants analyzed were aluminium Phosphinate (IPA), dimethylpropanphosphonate (DMPP), triethylphosphate (TEP) and ammonium polyphosphate (APP), which differ in oxidation state and/or decomposition temperature. Gases evolved during TGA analyses as well as solid residues have been studied by means of MS and FTIR. The results show that phosphorus flame retardants which significantly lose weight at temperatures lower than those of neat PU foams act in the gas phase irrespective of their valency: indeed, they are completely volatilized before polymer decomposition starts and thus no interaction between flame retardant and polymer can be expected. The effect of phosphorus oxidation state becomes important when flame retardant decomposition takes place in the same temperatures range as neat polymer. In this case, it seems that at lower P oxidation state (+1) a combined gas and solid phase action takes place while at higher P oxidation state (+5) only solid phase action was observed.
-
synergism between flame retardant and modified layered silicate on thermal stability and fire behaviour of polyurethane nanocomposite foams
Polymer Degradation and Stability, 2008Co-Authors: Michele Modesti, Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, S Semenzato, Roberta Bertani, Rino A MichelinAbstract:Synergy in flame retardancy of polyurethane foams between phosphorus-based flame retardant (aluminium Phosphinate) and layered silicates has been investigated. We used pristine montmorillonite as well as ammonium modified clay (commercially available) and diphosphonium modified clay, which were synthesised by the intercalation of the quaternary diphosphonium salt according to a procedure reported here. The morphology of the foams was characterised through X-ray diffraction (XRD), while thermal properties were characterised by oxygen index test, cone calorimeter and thermogravimetric analysis (TGA). The morphological characterisation showed that pristine and diphosphonium modified clays are almost slightly intercalated, while ammonium modified one is very well dispersed. The results of thermal characterisation showed that in the presence of Phosphinate enhancements of oxygen index, fire behaviour, measured by cone calorimeter, and thermal stability have been achieved. Phosphinate is therefore an efficient flame retardant for polyurethane foams and its flame retardancy action takes place in both condensed and gas phases. Pristine and ammonium modified layered silicate bring some enhancements of thermal stability while having no important effect in decreasing peak heat release rate (PHRR) and total heat evolved (THE) when used in conjunction with Phosphinate; their main advantage is related to the enhancement of compactness of the char layer formed. Diphosphonium clay is instead effective in further improving the fire behaviour of the foams because of the flame retardancy action of phosphonium: both PHRR and THE were decreased. The analysis of cone calorimeter data showed that clays act through physical effect constituting a barrier at the surface which is effective in preventing or slowing the diffusion of volatiles and oxygen, while Phosphinate and phosphonium are more effective owing to their combined action in both condensed and gas phases.
Alessandra Lorenzetti - One of the best experts on this subject based on the ideXlab platform.
-
Phosphinates and layered silicates in charring polymers the flame retardancy action in polyurethane foams
Polymer Degradation and Stability, 2013Co-Authors: Alessandra Lorenzetti, Bernhard Schartel, Stefano Besco, Denis Hrelja, Martina Roso, Emanuela Gallo, Michele ModestiAbstract:Abstract Nanocomposites of a charring polymer (like polyurethane foam) filled with aluminum Phosphinate (AlPi) with or without melamine cyanurate (MelCy) have been prepared by microwave processing and their thermal stability and fire behavior have been studied. Results on the interaction between flame retardants and layered silicates were provided as well as detailed investigation of the char strength, which has been carried out using a suitably developed method based on dynamic-mechanic analysis. Generally, the thermo-oxidative stability in presence of layered silicates was higher than the counterparts even if an additive rather than synergic effect took place; however, in some cases the interaction between clays and Phosphinate led to a significant decrease of weight residue. In nitrogen the residue amounts were about the same but a higher amount of phosphorus was retained in the solid phase in presence of clays. Cone calorimeter results showed that the use of Phosphinates led to a decrease of the PHRR; further addition of clays did not reduce the PHRR owing to the worse quality of char layer as demonstrated by the char strength test. However, it has been shown that the partial substitution of aluminum Phosphinate with melamine cyanurate gave improved results: the AlPi–MelCy filled foams showed similar pHRR and THE but lower TSR and higher char strength than AlPi filled foams. It was also confirmed that Phosphinate acted by flame inhibition but its action was depressed by the use of nanoclays owing to their interaction.
-
influence of phosphorus valency on thermal behaviour of flame retarded polyurethane foams
Polymer Degradation and Stability, 2011Co-Authors: Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, Michele Modesti, S DonadiAbstract:Abstract This paper reports decomposition/pyrolysis studies of polyurethane (PU) rigid foams containing Phosphinate, phosphonate or phosphate as flame retardant in order to study the effect of phosphorus oxidation state on their gas and/or solid phase action. The flame retardants analyzed were aluminium Phosphinate (IPA), dimethylpropanphosphonate (DMPP), triethylphosphate (TEP) and ammonium polyphosphate (APP), which differ in oxidation state and/or decomposition temperature. Gases evolved during TGA analyses as well as solid residues have been studied by means of MS and FTIR. The results show that phosphorus flame retardants which significantly lose weight at temperatures lower than those of neat PU foams act in the gas phase irrespective of their valency: indeed, they are completely volatilized before polymer decomposition starts and thus no interaction between flame retardant and polymer can be expected. The effect of phosphorus oxidation state becomes important when flame retardant decomposition takes place in the same temperatures range as neat polymer. In this case, it seems that at lower P oxidation state (+1) a combined gas and solid phase action takes place while at higher P oxidation state (+5) only solid phase action was observed.
-
synergism between flame retardant and modified layered silicate on thermal stability and fire behaviour of polyurethane nanocomposite foams
Polymer Degradation and Stability, 2008Co-Authors: Michele Modesti, Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, S Semenzato, Roberta Bertani, Rino A MichelinAbstract:Synergy in flame retardancy of polyurethane foams between phosphorus-based flame retardant (aluminium Phosphinate) and layered silicates has been investigated. We used pristine montmorillonite as well as ammonium modified clay (commercially available) and diphosphonium modified clay, which were synthesised by the intercalation of the quaternary diphosphonium salt according to a procedure reported here. The morphology of the foams was characterised through X-ray diffraction (XRD), while thermal properties were characterised by oxygen index test, cone calorimeter and thermogravimetric analysis (TGA). The morphological characterisation showed that pristine and diphosphonium modified clays are almost slightly intercalated, while ammonium modified one is very well dispersed. The results of thermal characterisation showed that in the presence of Phosphinate enhancements of oxygen index, fire behaviour, measured by cone calorimeter, and thermal stability have been achieved. Phosphinate is therefore an efficient flame retardant for polyurethane foams and its flame retardancy action takes place in both condensed and gas phases. Pristine and ammonium modified layered silicate bring some enhancements of thermal stability while having no important effect in decreasing peak heat release rate (PHRR) and total heat evolved (THE) when used in conjunction with Phosphinate; their main advantage is related to the enhancement of compactness of the char layer formed. Diphosphonium clay is instead effective in further improving the fire behaviour of the foams because of the flame retardancy action of phosphonium: both PHRR and THE were decreased. The analysis of cone calorimeter data showed that clays act through physical effect constituting a barrier at the surface which is effective in preventing or slowing the diffusion of volatiles and oxygen, while Phosphinate and phosphonium are more effective owing to their combined action in both condensed and gas phases.
Nigam P Rath - One of the best experts on this subject based on the ideXlab platform.
-
synthesis and biological evaluation of a phosphonate analog of the natural acetyl cholinesterase inhibitor cyclophostin
Journal of Organic Chemistry, 2008Co-Authors: Saibal Bandyopadhyay, Christopher D Spilling, Supratik Dutta, Cynthia M Dupureur, Nigam P RathAbstract:Two diastereomers of a phosphonate analog 6 of the AChE inhibitor cyclophostin were synthesized. The substitution reaction of phosphono allylic carbonate 10a with methyl acetoacetate gave the vinyl phosphonate 9a. Attempted hydrogenation/debenzylation gave an unexpected enolether lactone. Alternatively, selective hydrogenation, demethylation, cyclization and debenzylation gave the phosphonate analog of cyclophostin as a separable mixture of diastereomers 6. The trans phosphonate isomer was more active than cis isomer against AChE from two sources.
-
synthesis and biological evaluation of a phosphonate analog of the natural acetyl cholinesterase inhibitor cyclophostin
Journal of Organic Chemistry, 2008Co-Authors: Saibal Bandyopadhyay, Christopher D Spilling, Supratik Dutta, Cynthia M Dupureur, Nigam P RathAbstract:Two diastereomers of a phosphonate analog 6 of the AChE inhibitor cyclophostin were synthesized. The substitution reaction of phosphono allylic carbonate 10a with methyl acetoacetate gave the vinyl phosphonate 9a. Attempted hydrogenation/debenzylation gave an unexpected enolether lactone. Alternatively, selective hydrogenation, demethylation, cyclization and debenzylation gave the phosphonate analog of cyclophostin as a separable mixture of diastereomers 6. The trans phosphonate isomer was more active than the cis isomer against AChE from two sources.
Stefano Besco - One of the best experts on this subject based on the ideXlab platform.
-
Phosphinates and layered silicates in charring polymers the flame retardancy action in polyurethane foams
Polymer Degradation and Stability, 2013Co-Authors: Alessandra Lorenzetti, Bernhard Schartel, Stefano Besco, Denis Hrelja, Martina Roso, Emanuela Gallo, Michele ModestiAbstract:Abstract Nanocomposites of a charring polymer (like polyurethane foam) filled with aluminum Phosphinate (AlPi) with or without melamine cyanurate (MelCy) have been prepared by microwave processing and their thermal stability and fire behavior have been studied. Results on the interaction between flame retardants and layered silicates were provided as well as detailed investigation of the char strength, which has been carried out using a suitably developed method based on dynamic-mechanic analysis. Generally, the thermo-oxidative stability in presence of layered silicates was higher than the counterparts even if an additive rather than synergic effect took place; however, in some cases the interaction between clays and Phosphinate led to a significant decrease of weight residue. In nitrogen the residue amounts were about the same but a higher amount of phosphorus was retained in the solid phase in presence of clays. Cone calorimeter results showed that the use of Phosphinates led to a decrease of the PHRR; further addition of clays did not reduce the PHRR owing to the worse quality of char layer as demonstrated by the char strength test. However, it has been shown that the partial substitution of aluminum Phosphinate with melamine cyanurate gave improved results: the AlPi–MelCy filled foams showed similar pHRR and THE but lower TSR and higher char strength than AlPi filled foams. It was also confirmed that Phosphinate acted by flame inhibition but its action was depressed by the use of nanoclays owing to their interaction.
-
influence of phosphorus valency on thermal behaviour of flame retarded polyurethane foams
Polymer Degradation and Stability, 2011Co-Authors: Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, Michele Modesti, S DonadiAbstract:Abstract This paper reports decomposition/pyrolysis studies of polyurethane (PU) rigid foams containing Phosphinate, phosphonate or phosphate as flame retardant in order to study the effect of phosphorus oxidation state on their gas and/or solid phase action. The flame retardants analyzed were aluminium Phosphinate (IPA), dimethylpropanphosphonate (DMPP), triethylphosphate (TEP) and ammonium polyphosphate (APP), which differ in oxidation state and/or decomposition temperature. Gases evolved during TGA analyses as well as solid residues have been studied by means of MS and FTIR. The results show that phosphorus flame retardants which significantly lose weight at temperatures lower than those of neat PU foams act in the gas phase irrespective of their valency: indeed, they are completely volatilized before polymer decomposition starts and thus no interaction between flame retardant and polymer can be expected. The effect of phosphorus oxidation state becomes important when flame retardant decomposition takes place in the same temperatures range as neat polymer. In this case, it seems that at lower P oxidation state (+1) a combined gas and solid phase action takes place while at higher P oxidation state (+5) only solid phase action was observed.
-
synergism between flame retardant and modified layered silicate on thermal stability and fire behaviour of polyurethane nanocomposite foams
Polymer Degradation and Stability, 2008Co-Authors: Michele Modesti, Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, S Semenzato, Roberta Bertani, Rino A MichelinAbstract:Synergy in flame retardancy of polyurethane foams between phosphorus-based flame retardant (aluminium Phosphinate) and layered silicates has been investigated. We used pristine montmorillonite as well as ammonium modified clay (commercially available) and diphosphonium modified clay, which were synthesised by the intercalation of the quaternary diphosphonium salt according to a procedure reported here. The morphology of the foams was characterised through X-ray diffraction (XRD), while thermal properties were characterised by oxygen index test, cone calorimeter and thermogravimetric analysis (TGA). The morphological characterisation showed that pristine and diphosphonium modified clays are almost slightly intercalated, while ammonium modified one is very well dispersed. The results of thermal characterisation showed that in the presence of Phosphinate enhancements of oxygen index, fire behaviour, measured by cone calorimeter, and thermal stability have been achieved. Phosphinate is therefore an efficient flame retardant for polyurethane foams and its flame retardancy action takes place in both condensed and gas phases. Pristine and ammonium modified layered silicate bring some enhancements of thermal stability while having no important effect in decreasing peak heat release rate (PHRR) and total heat evolved (THE) when used in conjunction with Phosphinate; their main advantage is related to the enhancement of compactness of the char layer formed. Diphosphonium clay is instead effective in further improving the fire behaviour of the foams because of the flame retardancy action of phosphonium: both PHRR and THE were decreased. The analysis of cone calorimeter data showed that clays act through physical effect constituting a barrier at the surface which is effective in preventing or slowing the diffusion of volatiles and oxygen, while Phosphinate and phosphonium are more effective owing to their combined action in both condensed and gas phases.
Denis Hrelja - One of the best experts on this subject based on the ideXlab platform.
-
Phosphinates and layered silicates in charring polymers the flame retardancy action in polyurethane foams
Polymer Degradation and Stability, 2013Co-Authors: Alessandra Lorenzetti, Bernhard Schartel, Stefano Besco, Denis Hrelja, Martina Roso, Emanuela Gallo, Michele ModestiAbstract:Abstract Nanocomposites of a charring polymer (like polyurethane foam) filled with aluminum Phosphinate (AlPi) with or without melamine cyanurate (MelCy) have been prepared by microwave processing and their thermal stability and fire behavior have been studied. Results on the interaction between flame retardants and layered silicates were provided as well as detailed investigation of the char strength, which has been carried out using a suitably developed method based on dynamic-mechanic analysis. Generally, the thermo-oxidative stability in presence of layered silicates was higher than the counterparts even if an additive rather than synergic effect took place; however, in some cases the interaction between clays and Phosphinate led to a significant decrease of weight residue. In nitrogen the residue amounts were about the same but a higher amount of phosphorus was retained in the solid phase in presence of clays. Cone calorimeter results showed that the use of Phosphinates led to a decrease of the PHRR; further addition of clays did not reduce the PHRR owing to the worse quality of char layer as demonstrated by the char strength test. However, it has been shown that the partial substitution of aluminum Phosphinate with melamine cyanurate gave improved results: the AlPi–MelCy filled foams showed similar pHRR and THE but lower TSR and higher char strength than AlPi filled foams. It was also confirmed that Phosphinate acted by flame inhibition but its action was depressed by the use of nanoclays owing to their interaction.
-
influence of phosphorus valency on thermal behaviour of flame retarded polyurethane foams
Polymer Degradation and Stability, 2011Co-Authors: Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, Michele Modesti, S DonadiAbstract:Abstract This paper reports decomposition/pyrolysis studies of polyurethane (PU) rigid foams containing Phosphinate, phosphonate or phosphate as flame retardant in order to study the effect of phosphorus oxidation state on their gas and/or solid phase action. The flame retardants analyzed were aluminium Phosphinate (IPA), dimethylpropanphosphonate (DMPP), triethylphosphate (TEP) and ammonium polyphosphate (APP), which differ in oxidation state and/or decomposition temperature. Gases evolved during TGA analyses as well as solid residues have been studied by means of MS and FTIR. The results show that phosphorus flame retardants which significantly lose weight at temperatures lower than those of neat PU foams act in the gas phase irrespective of their valency: indeed, they are completely volatilized before polymer decomposition starts and thus no interaction between flame retardant and polymer can be expected. The effect of phosphorus oxidation state becomes important when flame retardant decomposition takes place in the same temperatures range as neat polymer. In this case, it seems that at lower P oxidation state (+1) a combined gas and solid phase action takes place while at higher P oxidation state (+5) only solid phase action was observed.
-
synergism between flame retardant and modified layered silicate on thermal stability and fire behaviour of polyurethane nanocomposite foams
Polymer Degradation and Stability, 2008Co-Authors: Michele Modesti, Alessandra Lorenzetti, Stefano Besco, Denis Hrelja, S Semenzato, Roberta Bertani, Rino A MichelinAbstract:Synergy in flame retardancy of polyurethane foams between phosphorus-based flame retardant (aluminium Phosphinate) and layered silicates has been investigated. We used pristine montmorillonite as well as ammonium modified clay (commercially available) and diphosphonium modified clay, which were synthesised by the intercalation of the quaternary diphosphonium salt according to a procedure reported here. The morphology of the foams was characterised through X-ray diffraction (XRD), while thermal properties were characterised by oxygen index test, cone calorimeter and thermogravimetric analysis (TGA). The morphological characterisation showed that pristine and diphosphonium modified clays are almost slightly intercalated, while ammonium modified one is very well dispersed. The results of thermal characterisation showed that in the presence of Phosphinate enhancements of oxygen index, fire behaviour, measured by cone calorimeter, and thermal stability have been achieved. Phosphinate is therefore an efficient flame retardant for polyurethane foams and its flame retardancy action takes place in both condensed and gas phases. Pristine and ammonium modified layered silicate bring some enhancements of thermal stability while having no important effect in decreasing peak heat release rate (PHRR) and total heat evolved (THE) when used in conjunction with Phosphinate; their main advantage is related to the enhancement of compactness of the char layer formed. Diphosphonium clay is instead effective in further improving the fire behaviour of the foams because of the flame retardancy action of phosphonium: both PHRR and THE were decreased. The analysis of cone calorimeter data showed that clays act through physical effect constituting a barrier at the surface which is effective in preventing or slowing the diffusion of volatiles and oxygen, while Phosphinate and phosphonium are more effective owing to their combined action in both condensed and gas phases.