The Experts below are selected from a list of 17334 Experts worldwide ranked by ideXlab platform
Tian Yu - One of the best experts on this subject based on the ideXlab platform.
-
logistics service quantity discount return Subcontract model
Industrial Engineering and Management, 2006Co-Authors: Tian YuAbstract:This paper considers the problem of coordination mechanism between third-party logistics supplier and Subcontractor.Comparing with the return contract opinion which focuses on optimization from the third-party logistics supplier,s perspective proposed by Alfredsson M,a three-stage logistics service quantity discount—return Subcontract model is proposed from the Subcontractor,s perspective which is composed by return contract models,subgame Nash-perfect equilibrium model and quantity discount—return model,comparing them with the initial model gradually,it is demonstrated that Pareto efficiency can be attained in the model and the scenarios are illustrated through a numerical example.
-
quality game behavior in thirdparty logistics service Subcontract management
Management Sciences in China, 2006Co-Authors: Tian YuAbstract:This paper analyzes the problem of controlling the Subcontractor service quality, making it accordance with the quality standard of thirdparty logistics service demander, proposes the thirdparty logistics service quality Subcontract models of Nash equilibrium model, Stackelberg equilibrium game and Cooperate game, which focus on the quality policy made by the thirdparty logistics supplier and Subcontractor. After the comparison of these three game models, the paper concludes that thirdparty logistics provider prefer to the Stackelberg equilibrium model, while Subcontractor would rather choose the Stackelberg equilibrium model than the Nash equilibrium model just on some conditions; meanwhile, the quality investment under the Cooperate game model is greater than that is under the Stackelberg equilibrium model, but it is less than that is under the Nash equilibrium model on some conditions.
-
research on third party logistics Subcontract design based on stackelberg game being nash equilibrium
Industrial Engineering and Engineering Management, 2005Co-Authors: Tian YuAbstract:The research theme of this paper is about how third-party logistics provider design a kind of effective incentive mechanism which can not only avoid the moral hazard behavior of the Subcontractor,but also promote Subcontractor to raise the serving performance constantly,until obtaining the best TPL performance.This paper through building Stackelberg game model where constructing the Nash equilibrium model assuming Subcontract decision variable as endogenetic variable firsts:and then analysis the optimal solution with the restraint of Nash equilibrium at the time of decision variable as exogenous variable,pushes the Subcontract relationship research at the principal-agent level into the lay that principal-agent combining with whole contract performance optimal decision.
-
logistics service quantity discount return Subcontract model
Journal of Hanzhou University of Commerce, 2005Co-Authors: Tian YuAbstract:This paper considers the problem of coordination mechanism between third-party logistics supplier and Subcontractor.Compared with the return contract opinion which focuses on optimization from the third-party logistics supplier's,s perspective proposed by Berglund M,a three-stage logistics service quantity discount—return Subcontract model is proposed from the Subcontractor's perspective which is composed by return contract models,subgame Nash-perfect equilibrium model and quantity discount—return model.Compared with the initial model gradually,it is demonstrated that Pareto efficiency can be attained in the model and the scenarios are illustrated through a numerical example.
-
research on third party logistics Subcontract design facing screening
Soft science, 2004Co-Authors: Tian YuAbstract:By analyzing the relation between Subcontract parameter, the author finds that the Subcontract offered to the Subcontractor with capability does not include any penalty scheme, neither does a gain-share scheme. However, the contract offered to the Subcontractor with high capability includes either a penalty scheme or a gain-sharing scheme. Furthermore, the more attractive the gain sharing scheme, the less the initial remuneration and vice versa.
Shi Jinfa - One of the best experts on this subject based on the ideXlab platform.
-
A study of the demonstration on KPI performance examination for aviation SP enterprise of XAC
Communications in Computer and Information Science, 2011Co-Authors: Jiang Zhiqiang, Feng Xilan, Feng Xianzhang, Shi JinfaAbstract:An often real problem encountered in performance evaluations for\naviation Subcontract production (SP) enterprise of XAC was difficult to\nestablish the quantificational targets and quantifiable performance\nindicators. Key performance indicators (KPI) is a target-type\nquantitative management indicators that measuring the process\nperformance. The practical manufacturing enterprise in aviation\nSubcontract production is expatiated. and the overall KPI analysis and\ndesign process from planning to final implementation and proceedings is\nput forward by using the KPI performance assessment. It is important to\nimprove human resources management and to enhance the economic benefits\nfor aviation SP enterprise of XAC.
-
A web-based approach of remote cooperative production scheduling and control in distributed network manufacturing for Subcontract production
2010 The 2nd International Conference on Industrial Mechatronics and Automation, 2010Co-Authors: Jiang Zhiqiang, Feng Xilan, Feng Xianzhang, Shi JinfaAbstract:Aviation Subcontract production (SP), the particular manufacturing mode of aeronautical manufacturing enterprise (AME), is an important approach and instrumentality participated in international market competition. In this paper, a Web-based approach of remote cooperative production scheduling and control (CPSC) in distributed network manufacturing for Subcontract production is proposed, and an implement framework on remote CPSC over Internet is accomplished. As a result, this study on the remote CPSC over Internet in distributed network manufacturing for SP is important for advancing the technical ability of aviation manufacturing, enhancing the manufacturing strength, and promoting the management level of the aeronautical SP, and a prospective and specific sample model with manufactures in decentralized network and integrated product development and manufacturing.
James G Mitchell - One of the best experts on this subject based on the ideXlab platform.
-
Subcontract a flexible base for distributed programming
Symposium on Operating Systems Principles, 1994Co-Authors: Graham Hamilton, Michael L Powell, James G MitchellAbstract:A key problem in operating systems is permitting the orderly introduction of new properties and new implementation techniques. We describe a mechanism, Subcontract, that within the context of an object-oriented distributed system permits application programmers control over fundamental object mechanisms. This allows programmers to define new object communication mechanisms without modifying the base system. We describe how new Subcontracts can be introduced as alternative communication mechanisms in the place of existing Subcontracts. We also briefly describe some of the uses we have made of the Subcontract mechanism to support caching, crash recovery, and replication.
-
SOSP - Subcontract: a flexible base for distributed programming
Proceedings of the fourteenth ACM symposium on Operating systems principles - SOSP '93, 1994Co-Authors: Graham Hamilton, Michael L Powell, James G MitchellAbstract:A key problem in operating systems is permitting the orderly introduction of new properties and new implementation techniques. We describe a mechanism, Subcontract, that within the context of an object-oriented distributed system permits application programmers control over fundamental object mechanisms. This allows programmers to define new object communication mechanisms without modifying the base system. We describe how new Subcontracts can be introduced as alternative communication mechanisms in the place of existing Subcontracts. We also briefly describe some of the uses we have made of the Subcontract mechanism to support caching, crash recovery, and replication.
Jiang Zhiqiang - One of the best experts on this subject based on the ideXlab platform.
-
A study of the demonstration on KPI performance examination for aviation SP enterprise of XAC
Communications in Computer and Information Science, 2011Co-Authors: Jiang Zhiqiang, Feng Xilan, Feng Xianzhang, Shi JinfaAbstract:An often real problem encountered in performance evaluations for\naviation Subcontract production (SP) enterprise of XAC was difficult to\nestablish the quantificational targets and quantifiable performance\nindicators. Key performance indicators (KPI) is a target-type\nquantitative management indicators that measuring the process\nperformance. The practical manufacturing enterprise in aviation\nSubcontract production is expatiated. and the overall KPI analysis and\ndesign process from planning to final implementation and proceedings is\nput forward by using the KPI performance assessment. It is important to\nimprove human resources management and to enhance the economic benefits\nfor aviation SP enterprise of XAC.
-
A web-based approach of remote cooperative production scheduling and control in distributed network manufacturing for Subcontract production
2010 The 2nd International Conference on Industrial Mechatronics and Automation, 2010Co-Authors: Jiang Zhiqiang, Feng Xilan, Feng Xianzhang, Shi JinfaAbstract:Aviation Subcontract production (SP), the particular manufacturing mode of aeronautical manufacturing enterprise (AME), is an important approach and instrumentality participated in international market competition. In this paper, a Web-based approach of remote cooperative production scheduling and control (CPSC) in distributed network manufacturing for Subcontract production is proposed, and an implement framework on remote CPSC over Internet is accomplished. As a result, this study on the remote CPSC over Internet in distributed network manufacturing for SP is important for advancing the technical ability of aviation manufacturing, enhancing the manufacturing strength, and promoting the management level of the aeronautical SP, and a prospective and specific sample model with manufactures in decentralized network and integrated product development and manufacturing.
Xilan Feng - One of the best experts on this subject based on the ideXlab platform.
-
A Fuzzy AHP Approach to the Evaluation of PCM Model Based on PFSC in Aeronautical Subcontract Production
2009 Second International Workshop on Knowledge Discovery and Data Mining, 2009Co-Authors: Zhiqiang Jiang, Xilan FengAbstract:The definitions of complex product configuration management (PCM) for aeronautical Subcontract production are introduced. A product functions and structure components (PFSC) oriented information model on product configuration template (PCT) is accomplished, in which rapidly responds to the customers' configuration requirement. And also, a fuzzy AHP method to the evaluation on PCT of PCM model in Aero-SP is proposed, and an illustrative case study is applied to demonstrate its practicability and effectiveness in the development of aero engine of advanced regional jet for 21st century (ARJ21), in which satisfied the customer's requirement (CR) with individuation and diversification.
-
A CR-Oriented Investigation of PCM Model Based on PFSC for Aeronautical Subcontract Production
2008 International Symposium on Knowledge Acquisition and Modeling, 2008Co-Authors: Zhiqiang Jiang, Xilan FengAbstract:A customer's requirement (CR)-oriented study of product configuration management (PCM) information model based on PFSC for aeronautical Subcontract production is brought forward. And a uniform product configuration model is formulated. Also, a PCT-based information model of PCM by self-organizing mapping, which in the relative matrix of customer's requirement characteristics and the functions principle property of PFSC, is formulated. And the solving strategy on PCT info model that rapidly responding the product configuration is accomplished. Lastly, a modularized design technique for the PCC development of ARJ21 is presented, and satisfied the CR on individuation and diversification.
